Jump to content
SAU Community

Recommended Posts

Well I've been training weights for about the last three years with reasonable progressions in some areas and pretty poor progression in others...

Have spent the last couple of weeks reading through Markos' thread 'Powerlifting'......much of the time in awe ha-ha.

To date I've just been training at home and only had a proper squat/power rack that I built for the last 12 months or so along with one strongman session per week (yoke, farmers walks, log etc.......).

My best mate is a PT and has just secured himself a warehouse where it will be focussed around 'Powerlifting', 'Weightlifting' & 'Strongman'.

In return for me fabricating some of the equipment I will be able to train there for free which I believe/hope will certainly help me progress especially for those times where I perhaps haven't gone for that extra rep, set, weight etc. (we all do it even if only subconsciously) and just having other lifters around can only be a good thing......

My current stats are as follows: 30yrs of age, 175cm @ 82ish kg

Current 1RM deadlift = 200kg

Current 1RM squat = 150kg

Current 1RM bench = 80kg (this is clearly the one that needs a lot of work)

I always figured I just had a weak upper body, in comparison to my lower body anyway......but after delving a little deeper I have visited a Chiro (Does Strongman himself) and had X-Rays taken, I will try attach the X-ray's.

Basically it turns out that I was born with a short leg (8mm shorter on my right than my left), apparently this is fairly common I am led to believe, so now all my right shoes have an 8mm heel.

What this has caused is pretty evident in the picture attached and that combined with a poor posture has made my shoulders very weak and therefore overhead press, bench etc. hasn't progressed as it should or I would have hoped. I am currently seeing the Chiro twice a week and doing rehab everyday hoping to get things sorted as quickly as possible but these things take time.

My goals I am hoping to achieve by the end of 2015 are as follows:

Weight = 85kg max.

1RM deadlift = 230kg

1RM squat = 175kg

1RM bench = 100kg

Total = 500kg minimum.

What are peoples opinions on those goals? too ambitious? too easy?

Love to hear peoples thoughts/opinions.......

post-16187-0-54675100-1424149887_thumb.jpg

Edited by mr_rbman
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/
Share on other sites

But meh to goals...goals limit potential

Just aim to get stronger and stronger all the time and put in 100%

You may not reach goals if you don't have any, but you'll know you're as strong as you could have been

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7481838
Share on other sites

Leesh, planning on using a programme that focusses around the three lifts.

Squats one day a week with supporting exercises.

Bench one day a week with supporting exercises.

Deadlift one day a week with supporting exercises.

Strongman session one day a week.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7482185
Share on other sites

Bench wise , bugger it off the program for a while and focus on shoulder girdle strength and thorasic mobility. Happens to lots of people doing the usual gym-bro training. Short legs , long legs or no legs its not posture.

You have weak external rotation and imbalance with the stronger internal rotation muscles. So not stable enough in the lift when you press. Makes you weak.

Likely if you have a degenerative injury to your rotator cuff, pretty common. You will almost never feel pain there as it gets refered(front of shoulder even wrists) Also, injury will degeneratively progresses without pain till you bugger it right up. To see if you have a problem, stand against a wall and rest a tennis ball between the wall and your back(shoulder blades). Lean against the ball , roll it around the should blades and see if you have any tender spots. If you do then you can roll the trigger points, probably want to stop anything that involves internal rotation for a while. There are conditioning movements you can do.

Train the shoulders up and bench will be no drama to progress.

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7482737
Share on other sites

  • 1 month later...

23/3/15

Deadlift

6x8 @ 70kg

5x8 @ 80kg

4x8 @ 90kg

3x8 @ 100kg

3x10 @ 110kg

farmers walks

x20, 20m walks 50kg a hand with 30 sec rest

5m rope climb

6 with 30 sec rest

tyre flip ~200kg

3x10

Edited by mr_rbman
Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7503930
Share on other sites

25/3/15

squat

6x8 @ 50kg

5x8 @ 60kg

4x8 @ 70kg

3x8 @ 80kg

3x10 @90kg

overhead press (from behind head working on opening up the shoulders/rib cage...

1x20 @15kg

1x15 @ 20kg

1x12 @ 22.5kg

1x10 @ 25kg

1x8 @ 27.5kg

1x6 @ 30kg

1x4 @ 32.5kg

1x2 @ 35kg

1x2 @ 37.5kg

1x2 @ 40kg

chinups

3x10 @ bodyweight

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7503934
Share on other sites

31/3/15

Front Squat

5 @ 70kg

3 @ 90kg

2 @ 110kg

1 @ 115kg

1 @ 120kg (PB)

yoke

x12, 20m walk @ 90kg

x5, 20m walk @ 140kg

x4, 20m walk @ 170kg

x3, 20m walk @ 190kg

x2, 20m walk @ 210kg

x1, 20m walk @ 230kg

farmers walks

x6, 20m walk @ 45kg a hand

x4, 20m walk @ 65kg a hand

x2, 20m walk @ 85kg a hand

overhead press (from behind head) wide grip

1x20 @ 15kg

1x15 @ 20kg

1x10 @ 30kg

1x8 @ 35kg

1x6 @ 37.5kg

1x4 @ 40kg

Link to comment
https://www.sau.com.au/forums/topic/453946-2015-goals/#findComment-7507100
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm confused. You said you want to "remove the clear coat from most panels" but it sounds like you are actually doing a full respray? Few random things to add -  If you chase the blistered paint with 120 grit, I can almost guarantee you'll chase it down to bare metal (that's fine). But if you paint the car from here, you'll have nice little indents where ever the blistered paint was. The new paint won't magically level out the low areas, you need to fill them. Which leads me to the main point I wanted to add, make sure the whole car is flat before you paint it. All those areas with blistered paint you sanded out, make sure to fill them and triple check they are flat with a block guide coat. I'd also check the whole car is flat with a large block and guide coat but yeah up to you if you want to go that far.   
    • 300hp (225kw) is barely outside the standard turbo's range with a bit of extra boost in it (200ish). If you are going to change the turbo you should aim for 250-300kw (330-400hp) to make the expense worthwhile
    • A couple of things, firstly omg that turbo is expensive! $3,000 USD for dinosaur technology is robbery. You could buy a G series turbo and have a good amount of change instead.  If you want a good budget option, have a look here - https://hypergearturbos.com/product/rb25dethighflow/ If you are keen to spend more, have look at the modern turbos, Garrett G series, Borgwarner EFR, etc. Have a look at the RB25 dyno results thread for inspiration.  If you upgrade your turbo to something that will support the 300hp you want and only "probably" have Haltech ECU, your car will only "probably" run. Actually, no it won't run. You are going to need the ECU and injectors at the time you do the turbo upgrade.  No thoughts on "this much boost" as you didn't say how much boost that actually is. Having said that, plenty of unopened RB25's making even more power then what you are chasing.   
    • I'm looking for a direct bolt on turbo upgrade for my 93 R33 GTST.  Anyone have experience with this Greddy T620Z turbo upgrade? I'd like to be able to run about 300hp to the rear wheels without putting too much strain on the turbo. I do daily drive the car.  Pretty stock car with basic bolt ons (exhaust outlet, down pipe, high flow cat and catback exhaust along with intake and FMIC).  I'l probably have a Haltech plug n play on the car before installing the turbo. https://www.greddy.com/products/turbo-upgrade-ecr33-er34-t620z-rb25-11520057   Also, any thought on this much boost on a 30 year old motor with 250,000KMs?  Engine feels/sounds strong for what it's worth.   Thanks you in advance!
×
×
  • Create New...