Jump to content
SAU Community

Recommended Posts

R32-25t is right. Cam gears, compression ratio, changing the engine capacity or putting smaller turbos on is what will increase response. Of course a good tune is always necessary but won't make the turbos smaller, I have -5's on a 2.6. 4500-5 k is where they hit full boost. An on tight corners an tracks I wish I had smaller turbos sometimes, as some corners 2nd gear is too Laggy you can drop it back to first but ur got 6000rpm n close to 400kw on tap which isn't really what u want either. Fast corners or straight lines -5's are great.

can you show me your logged afr numbers on your dyno sheet please then id like to see how your ign values look at the point of on boost.

all camshaft specs?

gears?

exhaust dia?

which injectors?

fuel?

plug type gap?

coilpacks?

is engine warn out most people wouldn't know!

easy to blame a turbo.

there are many factors.

R32-25t is right. Cam gears, compression ratio, changing the engine capacity or putting smaller turbos on is what will increase response. Of course a good tune is always necessary but won't make the turbos smaller, I have -5's on a 2.6. 4500-5 k is where they hit full boost. An on tight corners an tracks I wish I had smaller turbos sometimes, as some corners 2nd gear is too Laggy you can drop it back to first but ur got 6000rpm n close to 400kw on tap which isn't really what u want either. Fast corners or straight lines -5's are great.

can you show me your logged afr numbers on your dyno sheet please then id like to see how your ign values look at the point of on boost.

all camshaft specs?

gears?

exhaust dia?

which injectors?

fuel?

plug type gap?

coilpacks?

is engine warn out most people wouldn't know!

easy to blame a turbo.

there are many factors.

In the fact that you cant take a blokes word who owns and tracks the setup in question for them being a bit big for a 2.6L. Then wanting to try pulling apart his setup to try justifying his response that's how ;) I'm sorry but the choon ain't gunna make the improvements in boost response like the breathing mods will!

  • Like 1

y not just trying to help him..and im sure others with more responsive -5 set ups will chime in with advice also what's wrong with that we're just here to share ideas and help each other out there are some very knowledgeable people on this forum in different areas for different reasons can't hurt

Edited by mr skidz

I don't understand what there is to argue about though? -7s and -9s spool up a lot earlier than -5s, that's a fact. Therefore -5s ARE LAGGIER. You're interpretation of "How much lag is too much lag", might vary greatly to someone elses in this thread. At the end of the day some people say -5s are amazing, but I'd say an equal amount say "-5s are too laggy for me". Most of the time because these people only drive theirs on weekends down to the shops.

While you are right that a tune can make a massive difference in response (in comparison to a SHIT tune). The size of the turbos still stop it from ever coming near the smaller turbos response time. I have driven, and continue to drive multiple different GTRs on a weekly basis, I will never recommend -5s to a customer with a STOCK motor. While they are more exciting on boost than the smaller turbos, you're not driving above 4500rpm for 99% of your driving.
I also don't want to have to blast the ears of people I overtake because I needed a louder exhaust to make close to 400kw for the street.

Oh the lols

People keep mentioning only driving to the shops on weekends and the -5s being to lagy only for them, that is where matters least, it's on the track that laggier turbos show the weakness

While you can drive it above a set rpm to keep it "on boost" that is only half the story, ever wonder why there are GTRs out there that run 13 second quarters at 140mph, it's because there is also lag between gears and/or if you have to pedal it then there is lag waiting for it to boost up again, this is also true for circuit for ever gear change and when come out of a corner and the back end tries to overtake the front and you have to get off the gas

Most people won't know enough or have enough experience to feel this

Also it has been mentioned about advancing or retarding the cams, this is where twin cams come into their own

What happens if you advance one and retard the other and vise versa

Please note there is no question mark as I'm not asking, I already know the answer

It was also mentioned tuning with EGTs, this is only truely beneficial for tuning if done with individual EGTs, one for each port

This I have never seen done on a true street GTR with factory mount turbos

I also think what Mick-O was saying is if you are taking the car to a half decant tuner and not trying to tune it yourself ( this applies to the average Joe and not people actually capable of tuning ) then taking it to a different tuner isn't going to make a world of difference to turbo lag where mechanical changes can, this also doesn't apply to power at given RPM range but where in the RPM range the turbos hit full boost

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
    • Try fabricating something like this and install it under the pedals? Not sure if it's legal or not....
    • Even though I have some pretty good (brand) ratchet ringies, I avoid using them to break open tight bolts. A broken ratchet is very annoying.
×
×
  • Create New...