Jump to content
SAU Community

Recommended Posts

Hello Forum Members,

Just built the motor on my EVO 8 with Nitto and GSC components. The motor is able to handle 35 psi.

I also plan to run a BBK Full on 98 and E85 on dual maps.Anyone running a similar setup? If so what power and quarter mile time can I expect from 98 and E85?

Would a Precision 6262 be suitable for street driving instead of a BBK Full?

Posted the same question on jdmstyletuning forum. However, no input has been provided.

Cheers,

Simon

Simon

Link to comment
https://www.sau.com.au/forums/topic/454001-evo-8-build-what-to-expect/
Share on other sites

What compression ratio is your motor Simon?

A BBK full will go around 300+kw and make 25psi around 3800rpm depending on setup. Id say no to a 6262 being street friendly in a 2L street car its way too big. At 300kw you should be into the late 11 Zone if ya know how to pedal good :)

My 7 is at 300kw on the stock turbo ;) (Highflowed by Hypergear. Shh.) Stock cooler, airbox, piping etc.

No need for big gawdy turbos that will cop you a defect the minute the bonnet is raised, get on ethanol and enjoy the power it unleashes with a stock looking engine bay.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...