Jump to content
SAU Community

32 & 33 Gtr Parts + Man Cave Stuff! - Brisbane

nuci_gtr
 Share

Recommended Posts

nuci_gtr Enthusiast

nuci_gtr

Posted
Posted

32 gtr veilside catback $400

3.5" stainless steel, jasma approved so not too loud. Couple of minor grazes but overall good nick

32 gtr stock front pipe and cat $50

Heat shields a bit scratched up but pipe itself is fine. No holes or dents.

32 gtr door cards $40

Average condition, can probably be repaired.

33 gtr HKS hi-power catback $300

3.5" stainless steel, good nick, fairly quiet but still gives a nice note on boost.

High flow cat $150

Near new, has had a flange cut off on one end but can easily have another one welded on. 3.5".

Rb26 engine covers $100

Stock colour, suit respray. No timing cover.

Oem 33 gtr floor mats $100

Full set, could do with a good steam clean. Decent nick.

Rb26 coilpacks $60

Came as spares with my 33 gtr, car was running splitfires so never needed to use them.

R33 a-pillar trim drivers side $20

Has screwhole from gauge pod, otherwise good nick.

R33 gtr oem wing $150

In KL0 silver, couple of minor marks otherwise good nick.

R33 gtr front and rear "gtr" badges $30 each or both for $50

R33 gtr Bilstein suspension $200

Shock and spring combo, non adjustable. Sits about an inch lower than stock. Can sms pics of car to show how it sat.

Vb vending machine $500

As new condition, about a metre tall, plays vb tune when you dispense a drink. Never used. Will take any cans as well as vb stubbies. Can sms pics.

Tooheys extra dry iPod dock + esky $250

Shaped like a big extra dry stubby, about a metre high, has iPod dock on top, speakers and strobe lights in the neck and hollow in the bottom for beers. Can sms pics.

Can post smaller items, otherwise pickup Brisbane northside. Best contact is on 0419 961 fivefivesix. Any dramas or if you're after pics just let me know and I can text them through. Will add items as I find them.

Cheers, Dan.

  • Like 1
Cheaboi Rookie

Cheaboi

Posted
Posted

May be interested in the R33 gtr Bilstein suspension If there still for sale?

Also its for my 97 stagea and from what i've read it should fit i was wondering if you could confirm this? And yeah sitting to low atm scraping too much.

nuci_gtr Enthusiast

nuci_gtr

Posted
  • Author
Posted

I couldnt tell you for sure if it'll fit mate, haven't had much to do with stageas before but I'm sure it'd be pretty easy to find out. I've got a bit of interest in them already but if you pm me your mobile number I'll get you some pics and keep you posted. Cheers.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Sorry for reviving an old post, but I'm having the same hot idle tick issue. Did anyone ever find out what it was?  I have checked/ replaced Injectors Coils checked Lifter clerance (is at zero) Checked Cam lobes Replaced exhaust gasket and studs Would appreciate any advice this is driving me nuts  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
×
×
  • Create New...