Jump to content
SAU Community

Skyline R32 Gt-r With Light Rear End Damage

xntrq
 Share

Recommended Posts

xntrq Veteran

xntrq

Posted
Posted

Selling due to mums birthday coming up and needing cash to take her on a holiday, also having two cars, this can't be justified in keeping it. Bought it early this year to repair and keep.

Located in Fairfield

$11,500 ono

Clean Title

Out of rego since Dec 14

101,XXX KMs according to cluster

Can arrange delivery to local areas, I have a car trailer

Damaged in the rear end, all parts are provided for repair includes:

- Boot lid (already on the car)

- Rear Bumper Bar, same colour

- Rear Reinforcement Bar

- Rear Tail lights, same colour

- Reverse lights

Interior is very damn clean for what it is, all boot trims are inside the car

Heavy duty clutch

Bigger injectors (unsure what size but they aren't standard)

Runs well, though a bit rich due to injectors on a stock ECU

May require a replacement starter motor as its clicking

Wheels have roadworthy tread

Other than that, it's a GT-R, it's a car, it's pictured, it runs and there's not much more to say.

Please contact via PM.

post-77866-0-90809500-1425614230_thumb.jpgpost-77866-0-38023400-1425614242_thumb.jpgpost-77866-0-03548400-1425614252_thumb.jpgpost-77866-0-99585900-1425614257_thumb.jpgpost-77866-0-73578100-1425614265_thumb.jpgpost-77866-0-00534300-1425614197_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Wazmond
      Dumb rich kid tries modding for the first time

      By Wazmond 路 Posted

      Come to Eastwood, you'll get plenty of that 馃ぃ
    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin 路 Posted

      Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Dose Pipe Sutututu
      RH9 R32 GTR Build Thread

      By Dose Pipe Sutututu 路 Posted

      Curious to see how the SpeedTek stuff holds up
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah 路 Posted

      The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Ozdavroz
      Dumb rich kid tries modding for the first time

      By Ozdavroz 路 Posted

      Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
脳
脳
  • Create New...