Jump to content
SAU Community

Recommended Posts

ok, im fairly sure one of my coil packs is failing causing a random missfire on idle and on cruising throttle. now the missfire is a little too random to just pull the plug off and see which one is causing it so i was just wondering whether like the rb20det coils you can sus out which one is screwed by taking an ohm reading on each one and if anyone has an idea on the specs. Also, are the rb20det/rb25det coils the same?

cheers

Link to comment
https://www.sau.com.au/forums/topic/45457-coil-pack-gone-out-da-windy/
Share on other sites

RB20 &c RB25 coils are interchangeable, im running 5 x rb20 with 1 x rb25 coil.

It may pay to check the resistance with a bit of temp in them, as mine when cold at room temperature all measured the same resistance...it was only after a drive and quickly ripping them out was i able to find the culprit coil

  • 1 month later...

just to revive an old thread, i just got my Splitfire Di coil packs today from jp. Now on the box it says for RB Series engines: RB26DETT, RB25DE, RB20DET & RB20DE. Will these be ok for my series 1 RB25DET? i rekon they will be. any help appreciated :D

-rb25

its not always the coils.. everybody just blames the coils when they're not sure :) its a favourite tuners response: "I don't really know what is going on so I'll just tell you its coils"

if i find out that this is the case, i will do all of my own work from that day forward. And its too late, i already own the new coils and I found out that the ones i was given are ok to use on RB25DET.

-rb25

its not always the coils.. everybody just blames the coils when they're not sure :) its a favourite tuners response: "I don't really know what is going on so I'll just tell you its coils"
That's a lame excuse considering its about a 30min job to replace the coils and test.

:) true, it just seems a lot seems to be about coils lately as the root of all evils. a few people have wasted a bit of money to find out its hasn't been - then again some have found it is.. so *shrug*

Guess you can only one thing at a time to eliminate things - I have an rb25 s1 igniter if you want to quickly test that sometime, although again thats only part of the whole system.

timing is perfect, the problem was discovered during tuning.

ok, i just put them in and went for a drive, using the old platinum plugs that would make it miss. Didn't miss a beat all the way to 7000 on 0.92bar. Very happy, fixed my problem. Also, after looking at the old coil packs, 5 of them have big white spots on both sides indicating spark blow-out if im right? Time for a re-tune with some more timing now....

-rb25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
    • Did the noise appear after your sand trap adventure? Could be something got dislodged and is playing rub rub. Even a rock wedged somewhere.
    • Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
    • Strangely I noticed it either disappear later in the day, or not be present. I definitely noticed when I was crawling around that open wheel thingy entering the pits (that part was audible in car). Driving home and commuting around town for example, I didn't hear it. It's plausible that it was a brake disc or something still slightly in contact. The brakes absolutely felt BAD for the first couple of sessions, huge amounts of shudder and grinding as they got up to temp - And then I actually just forgot about it as the day went on/didn't notice it. The videos were from the morning when this was more present than the afternoon/drive home when it wasn't. I've asked around and got a variety of responses including handbrake shoe contacting hub, CV joints, CB tailshaft bearing as above, and clutch input bearing. I didn't test if it disappeared when clutch was in. I haven't noticed it in any of the other videos nor did I notice it when driving to that extent. More or less hoping the microphone at the rear license plate giving some kind of clue of 'something' but it looks like "spin stuff and see if you can notice it" is the way forward here. I could be smart and use the gopro mic and re-mount it to that location to see if the sound is still present at low speed actually. Sounds like a decent test whenver I have the CBF'ness to drive the car again. Given it's almost 40C for the day of the track day and the next 3 days after, the CBF is high. All I've done since getting home is unpack the car, remove the remnants of the lip and undertray and left it there. I was surprised how well the PMU Club Racers actually worked. The brake performance on the track was absolutely fantastic, best I've ever personally used, no fade whatsoever and the bitiness was almost too good, I was scrubbing more speed off than I needed to, but I also ended up infield when I started trying to scrape off ... less speed.... so...
    • Not really, no. Anything you would do is easily reversible.
×
×
  • Create New...