Jump to content
SAU Community

Recommended Posts

For sale

Tallai - Gold Coast 0414596256

Nissan RB26 N1 R33 GTR crate engine long motor to sump with complete intake as shown. Have matching valley cover also available.

Engine has been compression tested 180psi across the board. Leak down tested 0% in each cylinder. With a comprehensive inspection undertaken. Has been used for 18,000km with -5's making 350rwkw on pump fuel at 18 psi. (Turbos not available)

Engine specifications:
N1 block Virgin bore (24U)
N1 Pistons 86mm (24U)
Nissan conrods
R33 crankshaft
N1 oil pump
N1 water pump
ARP Headstuds
Nismo GT500 headgasket
Tomei oil restrictor
Tomei 260 10.25mm intake and exhaust procamshafts
Tomei heavy duty valve springs
Tomei adjustable cam gears
Intake and exhaust ports have been port polished with port matched runners
Gates racing timing belt kit

Note: Removed from r32 gtr, has r32 oil pressure/water temp/air temp senders

$7000 negotiable give me a call or text to discuss can freight Auswide, more photos of motor, dyno sheet, compression results etc available at request

post-44496-0-66734600-1426476088_thumb.jpg

post-44496-0-47115900-1426476095_thumb.jpg

It hasn't been rebuilt, its an N1 crate motor from nissan with 18,000km of use. The head work I don't have receipts for but i can show you photos of the parts etc. Its been removed from a running vehicle and as per post had all checks made. I can more than comfortably offer a start up warranty with it, for a guarantee.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...