Jump to content
SAU Community

R32 2wd Oem Floormats

Matvei27

By Matvei27,
in Wanted to Buy

 Share

Recommended Posts

Matvei27 Community Regular

Matvei27

Posted
Posted

As stated. There's multiple designs, show me what you've got. Needs to be in relatively good shape though, at least good enough that I can refurbish them.

Don't message me if you have a 4WD R32 (HNR32, BNR32) as the floor mats are NOT the same and will not fit.

Link to comment
https://www.sau.com.au/forums/topic/454804-r32-2wd-oem-floormats/
Share on other sites
Matvei27 Community Regular

Matvei27

Posted
  • Author
Posted (edited)

no dude. i was referring to the 4wd and rwd being incompatible.

If you had taken two minutes to look this up in FAST you would realize I am right. They are not the same.

Edited by Matvei27
GTR-N1 Grand Master

GTR-N1

Posted
Posted

Have you tried talking to a motor trimmer? If your existing mats can be cut exactly the same it may be your best bet. Nissan's R32 mats can also crack terribly throughout the plastic base. Has this happened to yours? Or is it wear and tear from the carpet top layer?

Matvei27 Community Regular

Matvei27

Posted
  • Author
Posted

Have you tried talking to a motor trimmer? If your existing mats can be cut exactly the same it may be your best bet. Nissan's R32 mats can also crack terribly throughout the plastic base. Has this happened to yours? Or is it wear and tear from the carpet top layer?

I know they crack, mine aren't cracked but the carpet is a mess.

Actually though the real reason is I want one of the other styles of mat.

I like the OEM ones, there's a bunch of aftermarket ones but they're all really ugly.

Matvei27 Community Regular

Matvei27

Posted
  • Author
Posted (edited)

Nice way of saying it.

Try to be helpful and you copped a gob full.

Sheesh! I'll hang on to my HCR matt's.

If you notice his first post wasn't being helpful at all so I really had to reason to respond seriously to him.

Edited by Matvei27

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      gtr hood match gt/gtt front fenders?

      By JC71 路 Posted

      would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • TurboTapin
      boost source Size Garrett gt28 gen2

      By TurboTapin 路 Posted

      You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah 路 Posted

      So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • QB6SAGR
      Battle of the broken skylines

      By QB6SAGR 路 Posted

      Damn that was hilarious, and a bit embarrassing for skylines in general 馃槀 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline 路 Posted

      Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
脳
脳
  • Create New...