Jump to content
SAU Community

Steering Angle Sensor - Which End Is Up? (hicas Related)


mk2tmr2
 Share

Recommended Posts

  • 2 years later...

Hi Skyliner's ... 

I have a question, maybe you can help me out here... ? 

I used to be A authorised Nissan workshop and had Fast at the time, but I cant seem to get fast working with Win. 10. Also we are located in Denmark so we have the european disc for Fast. Anyway... 

I have this R32 / chassis nr: BNR32-013497 from 12/1990 , an "early" model. 

It is imported from Malaysia, and came with a nissan GTR steering wheel - I noticed when driving for some time 20 minutes or so, that the steering jumped - no Hicas light came on - but the rear wheel turned slightly when it was supposed to be straight. 

checked the Hicas with a Nissan Consult II tester - No faults but read 153 degres to the left on steering angel sensor when the steering wheel was straight,

I took the steering wheel off, and yes it was the new type with the holes at 12 & 6. 

when I lign the steering angel sensor up with the middle point of the neutral signal it of course lines up at 1 & 6 o'clock. 

So I have the "early" type of steering angel sensor and the new type steering wheel...

I have looked at some parts catalog pages, and seemed to have found that the early steering angel sensor should 

be part number: 28475-01U00 or alternative number: B8475-01U00. (there are no number readable on the sensor equipped)

The Question is I think I have found the later version of steering angel sensor equipped from 09/1991 -  models 

wich should have the number 28475-01U11 or alternative number:  B8475-01U11. 

Do you know if this number are for an sensor with alignment 12/6 o'clock and does it fit on the car with the early version´s ?

Cause Nissan europe cant confirm this for me.

If I could buy the new type sensor that fits the steering wheel, then I can get the Hicas working with the steering wheel at the right position, right now I drive around with the steering wheel turned 153 degrees and the Hicas works superb.   

Hope you have the answer for this - best regards Lars. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
    • NO HITS PRICE DROP   ENGINE - $8.5k ONO TRANSMISSION - $1.8k ONO  
    • If it has had a code in the recent past, the code should still be there waiting to be read.
×
×
  • Create New...