Jump to content
SAU Community

Recommended Posts

I love how my questions always get some different responses.

I've been told that any more camber would kill these tyres (street tyres) but then again I feel like I'm seeing wear on the outside edge - as in it's darker and feathered.

I am sort of thinking I might not change much at all and will head to winton as is for back to back testing with known lap times. Then adjust dampening, then maybe disconnect some swaybar end links and see what happens.

I am also feeling like I might be asking too much from the tyres but I do recall hearing of a soarer (heavier than me) that did a flat 40 at Winton on the same tyres so I should be able to do it easily...

Just some input, high rate coilovers springs are usually a cheap alternative to setting up a total suspension (not all coilovers but most low level units). You want the wheels to move with the road surface so usually a lower spring rate with good damper adjustability, then tune the body roll with the sway bars. For settings I usually try to get as much caster as I can, higher caster negates the need for high camber angles. Too much camber and you can actually loose grip because you have less tire to road surface contact.

Most coilovers here in Japan are made to drop in quickly and cover all the jobs of the suspension components because the labor costs to install and tune suspensions is astronomical.

Additionally run the smallest rims you can with a high quality tire, super low profile tires make you give up a lot of dampening area (side wall) for no performance gain.

start your alignment at zero toe (front and back) and tweak it from there.

personally, I can't stand toe in at the rear. I find it stunts the lively rear end that the skyline has, it tries to tame it and make it stable and you either end up with something that is stable, or is substantially sideways. there is no finesse or middle ground and I think rear toe in makes it more skittish (at the limit - if you are below the limit it is more stable). a tiny bit of toe out at the rear brings it to life and it's fun to drive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Could someone post some pictures of the factory Jack , tools, spare tire and how they were in a 1998 ER34 2 door skyline originally?
    • UPDATE: Hi all!  As we are getting towards the end of this thread where I’ll showcase final dyno numbers and graph, I wanted to provide an update. Tao from HyperGear has done an amazing job building the custom divided T3 housing for the G30. Communication was flawless, price was great, and now the housing is estimated to arrive in 7-10 days! Very very pleased. I must add, if someone is looking for an affordable turbo and end up reading this thread, I would recommend HyperGear. Genuine brands are the way to go as their proven reliability, predictable performance, and there’s a plethora of information available for specs, flow, and more. This HyperGear recommendation is based on their excellent communication, dedication, and willingness to listen to their customers. I particularly liked their ability to create custom adaptations tailored to specific needs, which is a HUGE benefit over other brands. And if we consider the HyperGear provided dyno results, it adds reassurance knowing their turbos can compete against genuine brands. Next update will be after the dyno!  
    • I've previously seen people post up "dress up bolt kits" for RBs but don't remember seeing them specify the full contents. I can only really suggest you grab the verniers and start measuring, and keep in mind the cam cover and timing cover bolts are both quite specific with a wider unthreaded section where the bushes sit, that will make it hard to get aftermarket replacements which tend to be all thread (set screws) or for longer bolts a flat section with a shorter threaded section at the end
    • I believe there was a similar one posted by @duggyphresh. They were re-routing their battery positive cable in the way I am also trying to achieve. Sorry, I’m new to this forum, so was a bit late to the party by a few months and so reignited the old thread, as I wanted to know how they got on with doing it.
    • Wasn't there a thread on this very subject just a few weeks ago?
×
×
  • Create New...