Diameters Of Sway Bars On '01 V35 Sedan

[Sandez]

Hi Folks,

Just a quick question, I'm after the diameters of the swaybars on my '01 V35, as I'm looking to replace the brushings.

Also, are there any common parts shared with other models that could perhaps be a low cost way of doing so?

Cheers.

[t5iv]

http://www.whiteline.com.au/product_detail4.php?part_number=BNK006

Bushings, solid sway bars (think the front is 2mm smaller in diameter but solid makes a world of difference), end links. Call and verify though. Worst case, just buy the bushings from Whiteline.

[Sandez]

Sweet, thanks!

I have a contact at MRT Performance so I might source 'em through there.

Thanks again mate.

Edit: I should add that I am not currently looking to replace the swaybars, just bushings at this stage. Do you reckon they'd be able to grab them from the kit, or would I be better off sourcing from a wreck?

Edited April 9, 2015 by Sandez

[t5iv]

Sweet, thanks!

I have a contact at MRT Performance so I might source 'em through there.

Thanks again mate.

Edit: I should add that I am not currently looking to replace the swaybars, just bushings at this stage. Do you reckon they'd be able to grab them from the kit, or would I be better off sourcing from a wreck?

Better off getting new bushings from Whiteline (or someone who supplies Whiteline). You can buy just the bushings without sway bar etc. Take a look on the site.

I recently purchased a full bush kit from there. Have done the front so far - remarkable difference on a 12 year old car. Rears are to be done when I have time.

[Sandez]

Great, I'll do that.

Thanks again. My car will be turning 14 this year so I imagine it will make a big difference for it as well!

[t5iv]

Yeah. It's probably best to buy the kit and do them all. If not, buy the kit and just do the bushes that you want. It works well out significantly cheaper.