R33 Gtst - 0 Boost Reading

[Brad13]

Hey guys,

Did a bit of a service on my 96 R33 GTST today. Changed the oil, flushed the coolant, & replaced the oil and fuel filter. I also pulled off the coil packs in an attempt to change the spark plugs however didn't end up having the time so I put it all back together.

The car starts and runs fine, however my boost reading now just sits at 0.

Does anyone have any idea what this would be? I have the stock gauge on the dash and a blitz dual turbo timer and both just sit dead still at 0. I have another boost gauge mounted on the pillar and that seems to only move from -.5 to 0 bar when spooling.

Any help at all would be very much appreciated! (Sorry by the way if there has been another topic that has answered this, I had a look already but couldn't find anything helpful besides checking the boost line isn't split which it doesn't seem to be)

Thank you!

[Brad13]

Scratch that, found the boost line that had come off!

[Serpandrew]

Might help to put zip ties or small hose clamps on. If they are too stretched and come off easily then possibly change the hose, really cheap and easy to do.

[Brad13]

Probably not a bad idea, thanks for the tip!