Jump to content
SAU Community

Educated Guess At The Final Tune Results


Recommended Posts

Yes agreed. Although I would like 450kws Id happily sacrifice a little from the top end for more midrange. I've tried a few different low mount turbo set ups, hopefully I've got it right this time :) also a good tuner is critical

Is that why you got snails that will do 550 with relative ease? :P
Link to comment
Share on other sites

I check this thread every day waiting to see the new dyno results, I must be as excited as you pete haha

I do not think excited is a word I would use at the moment.. Ah let me think what I would use, yeah I got it , PISSED OFF!

I was told the car was on the Dyno all day last Wednesday the 9th, I asked them how it went on Thursday=no reply and emailed every day since, Friday=no reply, Saturday =no reply, Monday= no reply, Tuesday = no reply , Wednesday = no reply, today, I lost it in an email to them but it is not over yet, so ?

I have asked a very simple question every day, how did the tune go, was there a problem, if so please let me know = NO REPLY!

Just an answer,if there is a problem tell me or even bullshit to me, that would be better than being Stonewalled :(

Now to top it off they think they found the leak on Monday and put a new hose on Tuesday I think, asked if that fixed the problem, guess what , yeah, no reply :rant: :rant: :rant: :rant:

Link to comment
Share on other sites

Wait till they want money. Then they will be all over yu.

They have never had to ask me for money, I always offered while the work was being done.

I just do not understand why a business would treat good paying customers with disdain .

It takes no more than 2 minutes for the office staff to get the information and call or answer an email , the boss does not have to do it and there is no more communication problems, but being ignored, day after day wears your patients out and you do and say shit you would not normally do, like this.

Link to comment
Share on other sites

They must be kidding. Why would they give you no answer.

Its called managing the customers expectations.

Pretty easy to do.

This also happened when the car went in for the build and I thought we were past that, apparently not ?

I had a business for 40 years and never treated the worst paying customer like this, but one of the best ?

Maybe I am old school :/

Link to comment
Share on other sites

Did you ever smell any burnt coolant smell's ? they'd need that long if they had to strip the motor and fix a cracked head or similar,

Big name business like that probably never respond to emails unless its to do with parts or money owing...

  • Like 1
Link to comment
Share on other sites

Did you ever smell any burnt coolant smell's ? they'd need that long if they had to strip the motor and fix a cracked head or similar,

Big name business like that probably never respond to emails unless its to do with parts or money owing...

No Mate, could not even see a leak ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There is a LOT of stuff that can be done, it all depends on how much time and money you want to spend on doing in.  Not all ECUs will be able to do it, and the more control you need the more time and knowledge needs to be put into making it work.  If you're willing to spend the time and money and have the right hardware and skills involved there's a lot that can be done. 
    • I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
×
×
  • Create New...