Jump to content
SAU Community

Recommended Posts

On 11/18/2018 at 1:40 PM, Nismo 3.2ish said:

Both cams going to 272 / 10.5 , could go to 11.0

Going  9.5:1 CR , they are going to use a thicker gasket , in case higher CR is ever wanted

 

So you're going with the dome top pistons. Nice. Are you going to do any head work, eg porting etc? Also, what size gasket?

I've got a 3.2 building going, and I have a full cnc ported head and built head with o/s valves etc. I'm probably going to stick a 1.2mm h/gasket

1 hour ago, Predator1 said:

So you're going with the dome top pistons. Nice. Are you going to do any head work, eg porting etc? Also, what size gasket?

I've got a 3.2 building going, and I have a full cnc ported head and built head with o/s valves etc. I'm probably going to stick a 1.2mm h/gasket

It is half CNC port and remainder hand ported. The throat of the port  was done on a CNC machine and the remainder of the port is hand ported , cuts down a bit on cost Vs gain ?  Have 1mm OS valves etc already . 

Pistons are from CP-Carrillo in the US , will get a few pics as it goes together . Don't know what size gasket yet, they are going thicker to allow more CR should it be wanted in the future :/ 

What Turbo/s are you running. What else are you doing?

Doesn't seem like too many blokes do porting on their cars, guess it's because of "cost Vs gain" , other mods probably get them going  going better at lower costs , well ? 

The power is in the headwork. 

Hence why my S15 head was hand ported & polished by NAPREC.

The GTR has also been ported & polished by Prostock Motorsports. 

And the reason most people dont port & polish is because let's face it, they don't want to pay the money.

Look at Pauls car, its a fire breathing animal because he had his done by the 7 sec Drag 33 guy at HKS.

23 minutes ago, BakemonoRicer said:

The power is in the headwork. 

Hence why my S15 head was hand ported & polished by NAPREC.

The GTR has also been ported & polished by Prostock Motorsports. 

And the reason most people dont port & polish is because let's face it, they don't want to pay the money.

Look at Pauls car, its a fire breathing animal because he had his done by the 7 sec Drag 33 guy at HKS.

I have no doubt porting done properly is a positive mod, it always has been. 

Pauls car is mad!

Mine may not show the portings full potential because of the 8374 on a 3.2 , it will be falling over around 6000 , it does that now , my tuner will get the best out of it and should be a ton of fun and interesting to see the results 

  • Like 2
15 hours ago, Nismo 3.2ish said:

It is half CNC port and remainder hand ported. The throat of the port  was done on a CNC machine and the remainder of the port is hand ported , cuts down a bit on cost Vs gain ?  Have 1mm OS valves etc already . 

Pistons are from CP-Carrillo in the US , will get a few pics as it goes together . Don't know what size gasket yet, they are going thicker to allow more CR should it be wanted in the future :/

What Turbo/s are you running. What else are you doing?

Doesn't seem like too many blokes do porting on their cars, guess it's because of "cost Vs gain" , other mods probably get them going  going better at lower costs , well ? 

Interesting, I would have thought CNC would actually be cheaper then doing it by hand, especially that you pay for by the hour?

Careful with the size of the HG, it has to be precise, otherwise you may risk det and will severely limit your power.

I've got a 9180 with a 60mm wastegate. The head is where all the power is made, so its best to do the homework on it. It is rocket science once you start getting into the intricacies involved such as air speed and pressure at different points in the chamber(None of that which I understand tho :D )

I can only go off what the builder said about the section they would hand port , they have a very good reputation in the game and have turned out some special cars. I figured while it was on the CNC , let it do the lot?

Do you have a build thread ,  1.05 or 1.45 a/r, if I ever went bigger I would go 9180/ 1.45 , but there’s not much chance of that ?

When will your work be finished , like to see the results 

i was hoping for a Xmas present but doesn’t look promising atm , so 2019 ?

 

Nah, dont have a build thread, I don't come on here much. I was supposed to just do a 2.8 stroker, however, plans changed.

I've got the 1.05 housing, however I feel it will run out of puff, so will have to see how the it goes when I get it tuned. If it runs out of puff, then will live with it till I can afford to stick the bigger housing, or a completely different turbo setup.

Not sure when mine will be on the road, hopefully Feb, as I still have tonnes to do.. complete fuel system, accusump, etc etc.

Whats your fuel setup? I'm probably going to go for a -10 feed and -8 return with a dual pump surge tank.. all e85 compatible lines etc.

1 hour ago, Predator1 said:

Nah, dont have a build thread, I don't come on here much. I was supposed to just do a 2.8 stroker, however, plans changed.

I've got the 1.05 housing, however I feel it will run out of puff, so will have to see how the it goes when I get it tuned. If it runs out of puff, then will live with it till I can afford to stick the bigger housing, or a completely different turbo setup.

Not sure when mine will be on the road, hopefully Feb, as I still have tonnes to do.. complete fuel system, accusump, etc etc.

Whats your fuel setup? I'm probably going to go for a -10 feed and -8 return with a dual pump surge tank.. all e85 compatible lines etc.

This wasn't a build thread, wasn't intending to do all this work, like a DH I got carried away trying to get what I wanted , pretty close now and after this LAST lot , it will be all done and dusted . 

The 9180/1.05 should be mad , guess it depends what you are after. Mine is falling over around 6000 but still has plenty pushing it to 8000 for me , hard to use more than 6500 anywhere on the street, no need to rev the shit out of it.

 Nuke surge, twin Walbro 460s and a 460 p/u , -8 through to a Plazmaman rail , flex fuel system , ID1300 injectors and a shit load of sensors keeping an eye on everything that moves on the car, lol

Vcam allows more low end through to running out of puff, very linear car to drive.

Can't wait to see how this last lot makes the car drive, not expecting the world but it should be noticeable all the way through to limiter 

4 hours ago, Predator1 said:

Nice, so we have a very similar setup.. minus the Vcam. What boost/power are you seeing? Any latest Dyno sheets?

Do you have any block bracing/caps?

Dyno graph page 119, think the PSI was 26 ish on E85 and 20 ish on 98. I was never going for high top end, would have had a 9180 bolted on LOL

Had some grouting in the block , adds block rigidity and helps to prevent cracking from twisting due to torque

Don't know about the block bracing/caps ?? 

13 hours ago, Nismo 3.2ish said:

Had some grouting in the block , adds block rigidity and helps to prevent cracking from twisting due to torque

 

Interesting concept about grout filling - I'm not sure whether half filling the block provides the rigidity where its MOST needed, ie the top.

What size exhaust?

1 hour ago, Predator1 said:

Interesting concept about grout filling - I'm not sure whether half filling the block provides the rigidity where its MOST needed, ie the top.

What size exhaust?

Like everything, there seems to be different options on grout fill, some do it if the car runs over 400awkw to absorb a bit of the twist I guess , read where  some do it because of the harmonics , something to do with the vibration. I have no idea but if it’s the right type of filler  ?? 

4” dump to 3.1/2” to tail, pretty quiet system, less noise , less notice and that’s how I like it. 

With the new cam sizes I was wondering about it being a bit lumpy but with the Vcam it should be ok , small town , don’t need attention ?

just found and old thread, some interesting thoughts on grouting the block 

https://www.sau.com.au/forums/topic/354935-max-power-for-rb26-block/?page=2

Guess there are plenty more, for and against. 

  • 2 months later...

Here is the run-in tune , going down later this month to finish it. thought I would post it and see if there will be much of a difference after the next tune . Do not expect much of a change , just a bit more .

  The results were emailed to me and I was not too happy when I compared the both Dyno runs , but  the scaling was different for this tune. But the car runs better everywhere than the Dyno suggests. Need your bum in the seat to appreciate it.

Paul was up last week and took it for a drive , well more like a 120Klm romp, blew 3/4 of a tank and he was reasonably impressed with the way the car runs now

 

 

 

.1736193733_MYLASTRUNINTUNE.jpeg.f9329de3d3e89cd2fb21bd4e2121d562.jpeg

 

 

1 hour ago, Ben C34 said:

Wow. 20psi at 3000 rpm. That would be fun!

This is what the tuner said "I reckon you could do your lakesway run test not even revving hard under 4500rpm and it will be a beast.  It really is the opposite of nearly every other GTR in the world where they are normally barely waking up then."

Come a long way mate , expensive learning curve but all done at last ?

Edited by Nismo 3.2ish
  • Like 1
On 3/10/2019 at 4:15 PM, Nismo 3.2ish said:

Here is the run-in tune , going down later this month to finish it. thought I would post it and see if there will be much of a difference after the next tune . Do not expect much of a change , just a bit more .

  The results were emailed to me and I was not too happy when I compared the both Dyno runs , but  the scaling was different for this tune. But the car runs better everywhere than the Dyno suggests. Need your bum in the seat to appreciate it.

Paul was up last week and took it for a drive , well more like a 120Klm romp, blew 3/4 of a tank and he was reasonably impressed with the way the car runs now

 

 

 

.1736193733_MYLASTRUNINTUNE.jpeg.f9329de3d3e89cd2fb21bd4e2121d562.jpeg

 

 

I drove this peach a couple weeks ago while up holidaying in Pete's home town.

Pete has mentioned that the old and new graphs don't show much difference. Throw the sheet in the bin is all I can say. It was stonking before this round but its halarious now. 

Doing the 120 km belt through "The Lakes Way" which is Pete's little playground was interesting. There is not a corner in the whole joint that you need 1st, 2nd or 3rd gear. There was a sign posted corner that was 35 kph that I did in 4th gear. just as I straightened the wheel it was turning tyres. You honestly couldn't fall off song in this thing if you tried. A choice of 3 gears in every corner. Use odd gears or even gears.

Anything from 3000 RPM and its ON. Not just 'coming on"... full noise, MFD blinking red shit. Being in such a tall gear all the time you need to recalibrate. 3000 RPM in 4th and feed it on, you think you're ready to change gear, look down and you're at 5500 RPM. In 6th, it has 24 psi by 2700 RPM. It’s a joke. As a street GTR, it would be bloody hard to beat this thing. Can turn tyres in the first 4 gears without much effort at all. Tyres are not motorway spec junk either. 275 RS4's with a Quaife front diff and the transfer case mod done.

If you're not happy with it Pete, time to sell it because it does its thing so bloody well!

You could quite easily get away with a 9180 on it and still be sweet. I know we have both spoken about it a zillion times, it aint for you. 

It does need brakes though. The thing doesn't stop AT ALL! Perhaps a set of decent pads (Endless CC-RG's) would go a long way here. 

The torque steer might need to be addressed too. It's quite scary.

Here is to the tadpole. The black tractor of the Mid North Coast!

  • Like 1
26 minutes ago, Piggaz said:

I drove this peach a couple weeks ago while up holidaying in Pete's home town.

Pete has mentioned that the old and new graphs don't show much difference. Throw the sheet in the bin is all I can say. It was stonking before this round but its halarious now. 

Doing the 120 km belt through "The Lakes Way" which is Pete's little playground was interesting. There is not a corner in the whole joint that you need 1st, 2nd or 3rd gear. There was a sign posted corner that was 35 kph that I did in 4th gear. just as I straightened the wheel it was turning tyres. You honestly couldn't fall off song in this thing if you tried. A choice of 3 gears in every corner. Use odd gears or even gears.

Anything from 3000 RPM and its ON. Not just 'coming on"... full noise, MFD blinking red shit. Being in such a tall gear all the time you need to recalibrate. 3000 RPM in 4th and feed it on, you think you're ready to change gear, look down and you're at 5500 RPM. In 6th, it has 24 psi by 2700 RPM. It’s a joke. As a street GTR, it would be bloody hard to beat this thing. Can turn tyres in the first 4 gears without much effort at all. Tyres are not motorway spec junk either. 275 RS4's with a Quaife front diff and the transfer case mod done.

If you're not happy with it Pete, time to sell it because it does its thing so bloody well!

You could quite easily get away with a 9180 on it and still be sweet. I know we have both spoken about it a zillion times, it aint for you. 

It does need brakes though. The thing doesn't stop AT ALL! Perhaps a set of decent pads (Endless CC-RG's) would go a long way here. 

The torque steer might need to be addressed too. It's quite scary.

Here is to the tadpole. The black tractor of the Mid North Coast!

The car drives as I always wanted it too , just took a while to get it there.

No 9180 for me , 460 AWKW and lots of torque is more than plenty for a streetcar , well for me, not you, hahaha.

I thought you headed to Sydney when you went for the drive and I was about to call the cops and report it stolen.. lol

I will do the brakes soon.

The car was really scary from the moment I bought it  , tried to kill me a few times heading for the bush. But better tyres and all new bushes helped a lot ,  it's a lot better now than it was. Not sure what to do about the torque steer , had it for a while now and I think the crappy road doesn't help, getting used of it . Might speak to the boys when I go for the tune next week. Maybe do an alignment when I am in Sydney

Glad you had some fun in it  :) 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, the latter. No diff should have a centre replaced without checking clearances because its unlikely to be the same as whatever came out. Not that that stops most people just checking a new centre in
    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
×
×
  • Create New...