Jump to content
SAU Community

Educated Guess At The Final Tune Results


Recommended Posts

Leave the poor guy alone. I would also be very edgy after everything he has gone through with this car.

True. Sorry mate.

Sometimes a bit of friendly banter gets taken the wrong way if your not in the right frame of mind.

But the main thing is that Pete beat the Tiida .... That's the main thing even at 10000 rpm. Would have sounded awesome.

  • Like 1
Link to comment
Share on other sites

Bit angry today Pete

No mate, its all good fun :)

I have never said I was any type of gun driver, I just like cars :wub: had a 911 and a TT300zx I used to push a bit, but I was a kid, 50 year old.

Everyone has their preferences , mine is a car that dives like a street car, one that has a bit of grunt from down low.

Do not need 3000 idle Ben, is that how you blokes do it. Me at 2500rpm and want to get it going in any gear drop down 1 gear and away you go, LOL

But serious it is great on the twisty stuff, so much fun. Not sure you could do the same on tight one lane roads with a T88 or something else that gives you 700 or 800 peaky HP, but I can only guess as I do not drive fast GTRs , just my heap :)

My car is the best fun you can have sitting down, well , a lap dance maybe ?

Link to comment
Share on other sites

True. Sorry mate.

Sometimes a bit of friendly banter gets taken the wrong way if your not in the right frame of mind.

But the main thing is that Pete beat the Tiida .... That's the main thing even at 10000 rpm. Would have sounded awesome.

Keep the banter coming mate, that is what makes the Forum fun, farken love it :banana:

Link to comment
Share on other sites

Have you got your car back yet Pete?

Not yet James, had an email this morning saying it looks like the leak has been fix but they will do some more tests over the next couple of days to be sure .

Not sure if they will be doing a new Dyno graph , soon see I guess ?

Things are looking up :)

  • Like 1
Link to comment
Share on other sites

At 70, I hope to be a much much more bitter and twisted old man than you. Pretty sure I am now at half of 70.

Oh don't worry mate , I was very bitter and twisted at 70 but now I am 73 I have matured , guess it comes with age , LOL

Link to comment
Share on other sites

Just thinking to myself.... I feel more anxiety over and your car in than my own. Ha ha. Ha. Might have to drive up from Melbourne so you can take me for a spin when you get it back.

Link to comment
Share on other sites

Just thinking to myself.... I feel more anxiety over and your car in than my own. Ha ha. Ha. Might have to drive up from Melbourne so you can take me for a spin when you get it back.

HAHA, that's why I have chilled, I left the anX to you. I lie , I had / have enough anxiety for the both of us. It's been a long 9 months :)

And it's not over :/

Edited by Nismo 3.2ish
Link to comment
Share on other sites

They are probably just putting the head back on now pete, takes more than a few days to strip a motor again, lol... :ph34r: apprentice stuffed up again..

Thanks Mark, now my head is exploding thinking about anther 5 months getting the motor re built :bomb_ie:

No problems, I will be picking it up VERY soon and looking forward to a little spirited driving to see how it is running :)

Link to comment
Share on other sites

Got a date for pickup? Good RB30 blocks are getting harder to find.

They are going to do a few more tests and I should know by Friday :)

Just hope I got one of the good ones, they did all sorts of tests on my RB30 block, like below

ENGINE MACHINE WORK INCLUDING HOT TANK BLOCK, ACID

WASH , BORE AND HONE , BALANCE ENGINE COMPONENTS.

DECK BLOCK, MACHINE BLOCK FOR O/S HEAD STUDS,

MACHINE WORK FOR AWD ADAPTOR AND ENGINE BRACE KIT.

MACHINE SUMP RAIL TO TRUE UP ENGINE BLOCK.,RELIEVE ENGINE BLOCK FOR 3.2LTR STROKER ENGINE.

1.000 SONIC TEST AND XRAY ENGINE BLOCK TO TEST FOR SUITABLITY

Sounds like they did their best

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's probably an underlying issue with the A/C system too. I recently fixed mine, now it's fully control by the Haltech and car's factory HVAC controller  Have a squiz here:    
    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
×
×
  • Create New...