Jump to content
SAU Community

Recommended Posts

Round 3 of our Championship.

Saturday, 9th of May 2015

Sandown

This is a timed day run by AROCA.

We do NOT have reserved positions. This day will fill, so enter now.

http://www.alfaclubvic.org.au/forum/index.php/topic,14279.0.html

Link to comment
https://www.sau.com.au/forums/topic/455686-may-9th-sandown-track-day/
Share on other sites

I've got the same issue Scotty... Think it wasn't set up correctly... Either way, entry is in, just unpaid.

Edit: They've assigned the $240 price to the "Sprint" entry only... Go to your Event List -> Edit -> Tick "Sprint" under your car selection then the total will come to $200. not -$40 :yes:

Great, shouldn't be too many slow groups then ;)

:laugh: not everyone in the alfa club drives an alfa...

Low numbers means it's still a case of inviting other clubs to enter so they don't lose money on the cost of running the event.

Noticed there are very few Alfa's entered? presume there will be a rush before EoM as price goes up May

I don't think all entries from aroca go through the site. Their last winton day was the same with not many entries displayed. Non Alfas were grouped together.

Aroca ran their first door to door racing sessions at winton too. Hopefully they have it at sandown as it was pretty entertaining!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...