Jump to content
SAU Community

Recommended Posts

Hey guys,

New to the forum and new to the skyline world. I bought a 33 two weeks ago. It has a full 3" exhaust with cat and hotdog muffler and originally had a cannon. I got a hold of a set of 3" stainless straight pipes and put them on mainly because i dont like the look of cannons but since have noticed a power loss top end. It just feels a lot slower, even changed the way it hits limiter.

So I'll probably put the cannon back on to gain the top end performance back, but I don't really want to. Is there anything else I can run thats not a cannon or straight pipes and will do what I want?

Thanks in advance.

I assume by "straight pipe" that you mean you replaced the rear muffler with a section with no muffler. Or possibly that you replaced the whole lot including the hotdog, meaning that you have nothing but pipe behind your cat. If either of those cases are true, then I would expect;

  • It's horribly loud,
  • It probably sounds like arse raping a donkey,
  • It shouldn't do ANYTHING to make your car make less power.

So either it just feels slow because it sounds so bad, or just possibly, and I mean JUST, it has increased air flow through the engine sufficiently that the shitful R33 ECU has decided to put you into R&R territory and is calling a halt to the fun. In which case, it's not about the exhaust, it's about management.

Its just twin stainless pipes from the diff back, the hot dog is before the diff. It sounds good up until 4000rpm then has horrible stainless Eco. And was thinking it'd be the pipes cause who ever made them was pretty dodgie, like where the Y pipe is they've slipped 3" pipe over it and left the end of the Y pipe that should have been trimmed flush on the inside of the 3" pipe there, if you know what I mean, so could be hitting that and restricting it or f**king up flow?

As stated previously, any power difference is usually placebo effect. Tuck a quality 3" muffler up in the standard cavity and put a dump pipe on it. Having idiotic cannons hanging down on stupid angles is a good way to get a cops attention.

One suggestion, focus on keeping it legal or stealth as possible unless you want to get pulled over or defected regularly. Something custom is usually a lot better and works out well depending on the purpose of the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
    • Yes, but no. You need to keep the mating surfaces bare (ie the flat faces where the caliper and upright pads touch the dogbone) and also the internal threads will remain bare (unless there are no internal threads - do they use nuts on all the bolts?). So you can slow down obvious external corrosion, but not all of it. Anodising would be required to provide decent protection to the alloy, but I'm not actually sure if you should anodise something that is all about the strength. Anodising does reduce strength significantly. Like, up to 50% on some alloys for high thickness coating.
×
×
  • Create New...