Jump to content
SAU Community

Recommended Posts

Hi guys and girls,

So as the title states i have 2 sets of LMGT2 wheels.

These are a quality 2 piece wheel made in japan. Old school JDM style timeless and looks good on a range of nissan models with 5x114.3 stud pattern. Each set of rims are a staggered set specs of

17x8 +35
17x9 +38

They are in reasonable to good condition (not mint) however they will be very easily cleaned up due to their 2 piece construction. I have been quoted $75 a rim for powdercoating.

All wheels have decent tread on the rubber.

I can sell as a single set or do a deal for both

I was planning to use both sets to make a more aggressive fitment by using the front centres on the rear dishes. I have test fitted them in this configuration and looks to fit nicely with more stance. If both sets are wanted we can work out a deal. (i have photos of this which i can show you)

I have 7 center caps in total. However 4 are reserved to go with 1 set the remaining 3 I will sell individually to those missing caps

Located in western sydney. Please call or sms 0410616101

After 700 for the silver set

After 800 for the black set (includes centre caps)

Thanks for looking

post-86763-0-21654100-1429434391_thumb.jpg

post-86763-0-58342700-1429434401_thumb.jpg

post-86763-0-03828400-1429434411_thumb.jpg

post-86763-0-17547200-1429434426_thumb.jpg

post-86763-0-23306500-1429434441_thumb.jpg

post-86763-0-40538100-1429434468_thumb.jpg

post-86763-0-92790600-1429434489_thumb.jpg

post-86763-0-58663100-1429434510_thumb.jpg

post-86763-0-20035200-1429434539_thumb.jpg

post-86763-0-93055300-1429434586_thumb.jpg

post-86763-0-68016700-1429434606_thumb.jpg

post-86763-0-99704200-1429434617_thumb.jpg

post-86763-0-53030700-1429434629_thumb.jpg

post-86763-0-61351800-1429434678_thumb.jpg

post-86763-0-34633900-1429434758_thumb.jpg

post-86763-0-36368300-1429434777_thumb.jpg

post-86763-0-44039900-1429434851_thumb.jpg

Edited by monts

I bought a set and re-furbished them myself (mega pain in the ass)..mine are wider though...and in gtr offset so I tried them on my s15 because my gtr has no motor atm

excuse the standard hight lol needs so much more low amr smaller tires

post-134192-0-03685300-1429488160_thumb.jpg

post-134192-0-06176100-1429488193_thumb.jpg

post-134192-0-67201100-1429488392_thumb.jpg

post-134192-0-50654500-1429488422_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did a conversion on my rb20 with rb25 cam and pulley, controlled it with a solenoid (forgot the port diameter of the solenoid)  and made an oil port on the cam cap to lower pressure in the journal. Difference  is day and night, the rb20 isn't dogshit down low anymore, not a powerhouse but this had add much welcomed torque down low. Boost build a bit sooner and torque rise way more when it start building boost. Only need to deactivate the VTC past 6500/7000rpm.   Knowing how it help with only 2L, having it on 2.6L it should be a mod to think about early on as it gives a lot of performance on most on the rev range.
    • https://www.nengun.com/hks/valcon-rb26-v-cam-system   no controller but most will use ECU to control anyhow
    • Not too sure, the throttle body has 4separate plugs going to it. Im not sure if the throttle is driven by cable and the motor is for traction, cruise and something there light blue one is TPS. i don't understand why the throttle won't open with the cable until about 3/4 on them only moves the valves very slightly
    • There are other crowds doing 25Neo conversion kits.
×
×
  • Create New...