Jump to content
SAU Community

Bonnet Pop Up Cancellers

mycarhasposessedme
 Share

Recommended Posts

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
Posted

Hey, anyone have experience with using this little gadget on a V36.

http://www.ebay.com.au/itm/201031617244?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

The GTR Guys use them for track days to avoid a bonnet pop from hitting a cone etc.

The connector looks exactly the same on the V36, I guess its probably just some sort of resistor.

I've emailed the seller in Japan & he could not say whether or not it would work with the V36, just that they have not tested it with one.

Has anyone here tested/using this on a V36 for track days etc?

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/456412-bonnet-pop-up-cancellers/
Share on other sites
The Max Mentor

The Max

Posted
Posted

Best way to be sure would be to put an oscilloscope to one of the pins to see what voltages you see. If it's constant, then you're right, it's likely to be a purely resistive load. But if you see a pulse train of some sort, then chances are there's more to it than just a resistor, particularly if there's more than just two pins to the connector.

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted

Ok, after a bit more research, I've spoken to a guy in Japan who helps me occasionally bring in Vintage Japanese Electric Guitars which I am a collector of.

He says, in Japan they make this for R35 GTR, V36, Y51 & Z34, one part fits all.

So as a bit of a favor he's going to source a set locally & send to me.

So, I guess I'll be the Guinea Pig. Does sound pretty positive though.

Cheers.

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted

Sure, probably going to be 2/3 weeks before I get the parts & then probably another week to find time to do the job.

I'll do a pictorial "how to" if successful, for anyone that might want to do it also.

So unfortunately it could be a Month at the outside for a definitive conclusion.

So, bear with me if I don't update the thread for a little while,

Cheers.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Doing a 'how to' would be great, but I would be careful what you mention on a public forum.

Permanently canceling a pedestrian safety feature would be frowned upon by the authorities and your insurance in the case of an accident, especially if a pedestrian was hurt. You may end up paying any compensation yourself, even if it was their stupid fault.

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted (edited)

Hi Scott, yes I fully understand that. I consider it a track only mod.

From what I gather its quickly reversible by just unplugging the modules & re-plugging in the Bonnet poppers (battery disconnected of course, thanks Ben.).

The "how to" is just to show people what they need to remove etc to get access to the connectors.

I certainly understand where your coming from though.

Cheers.

Edited by mycarhasposessedme
  • 3 weeks later...
mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted

Okay, good news.

They Fit & work 100%.

I ended up buying a set off Ebay to suit R35 GTR, as my mate in Japan let me down unfortunately.

Access to the connectors is pretty tricky but totally do-able.

With both Bonnet Poppers disconnected & the Cancellers installed there are no check lights on the Dash.

I've done around 1500k's with them now, Track only of course & no probs.

I'll post up some pics later.

Cheers.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      First/Second Post

      By GTSBoy · Posted

      It is an absolute lottery. They can and have died at stock boost with low usage at all. The turbos are now anywhere up to 36 years old!
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Huh, wonder why it blew then. I never really beat on the car THAT hard lol I dailyed it and the turbo blew after 6 months
    • soviet_merlin
      Oem radio & steering wheel shroud for r33 (vic)

      By soviet_merlin · Posted

      That's odd, it works fine here. Try loading it on a different device or browser? It's Jack Phillips JDM, a Skyline wrecker in Victoria. Not the cheapest, but I have found them helpful to find obscure parts in AU. https://jpjdm.com/shop/index.php
    • GTSBoy
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By GTSBoy · Posted

      Yeah. I second all of the above. The only way to see that sort of voltage is if something is generating it as a side effect of being f**ked up. The other thing you could do would be to put a load onto that 30V terminal, something like a brakelamp globe. See if it pulls the voltage away comepletely or if some or all of it stays there while loaded. Will give you something of an idea about how much danger it could cause.
    • MBS206
      R34 GTT RB rough idle problem with weird RPM gauge fluctuations

      By MBS206 · Posted

      I would say, you've got one hell of an underlying issue there. You're saying, coils were fully unplugged, and the fuse to that circuit was unplugged, and you measured 30v? Either something is giving you some WILD EMI, and that's an induced voltage, OR something is managing to backfeed, AND that something has problems. It could be something like the ECU if it takes power from there, and also gets power from another source IF there's an internal issue in the ECU. The way to check would be pull that fuse, unplug the coils, and then probe the ECU pins. However it could be something else doing it. Additionally, if it is something wired in, and that something is pulsing, IE a PWM circuit and it's an inductive load and doesnt have proper flyback protection, that would also do it. A possibility would be if you have something like a PWM fuel pump, it might be giving flyback voltages (dangerous to stuff!). I'd put the circuit back into its "broken" state, confirm the weird voltage is back, and then one by one unplug devices until that voltage disappears. That's a quick way to find an associated device. Otherwise I'd need to look at the wiring diagrams, and then understand any electrical mods done.   But you really should not be seeing the above issue, and really, it's indicating something is failing, and possibly why the fuse blew to begin with.
×
×
  • Create New...