Jump to content
SAU Community

Rb30 Tensioner

devilsknife
 Share

Recommended Posts

devilsknife Collaborator

devilsknife

Posted
Posted

Hey guys run into a problem. So i didnt see my block before it went to the machine shop and got work done to it but i got it back and saw it was rb30de...so drilled and tapped to give oil and water but the tensioner as in the 2nd one on the right isnt level i think i could get away with drill and tapping it above the water pump??? Is there any threads that confirm that it works? And holds some power??

Link to comment
https://www.sau.com.au/forums/topic/456473-rb30-tensioner/
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

Nizpro mounted both idler and tensioner above the water pump ages ago.

You'll have trouble finding what belt to use though.

And there's no such thing as rb30de block.

Its a shame you didn't check to see if the idler face was there ready to go, all later blocks had it, just early blocks didn't all have it.

Guys have made some adapters and such to get the idler mounted in the typical spot.

Link to comment
https://www.sau.com.au/forums/topic/456473-rb30-tensioner/#findComment-7530862
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

And the belt doesn't hold power, neither does the idler or tensioner. They spin. They spin the same making 150kw ad 450kw. Spinning is spinning.

The only thing that will make a belt work harder would be stiff springs and aggressive cams, not power.

Link to comment
https://www.sau.com.au/forums/topic/456473-rb30-tensioner/#findComment-7530863
Share on other sites
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hypergear
      Hypergear Turbochargers and High flow Services Development thread

      By hypergear · Posted

      Result of another R35GTR build. Similar specs as above except this is running our bigger size SS-2 profile option. Made similar power except this car runs on Pump 98 fuel. Build specs are: Nissan R35 GTR 2015 model stock engine and box. ETS street intercooler boost logi intercooler piping with tial bov, boost logi turbo inlet pipe ID 1050 injector DW 300C fuel pump Decatted oem down pipe and y pipe& HKS exaust 3inch intake pipe Upgraded actautors HyperGear SS-2 high flow option Final result is 639whp / 477wkws hubs, Ron 93 / P98 fuel at 20psi.  
    • Therry
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By Therry · Posted

      Duncan:- it affect both sides.  Driver side is worse.
    • Duncan
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By Duncan · Posted

      That seems like a very special issue!  Does it affect both sides? Either way, I would disconnect the driver's side switch and see if it still happens, noting that might require removal of the whole door card which is a bit of a pain (it does on V37 and HY51)  
    • Therry
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By Therry · Posted

      MBS206:- The windows start to slowly open themselves. GTSBoy:- Battery is new since Dec. 
    • Vee37
      Brake pad Compound suggestion

      By Vee37 · Posted

      I currently have a 2008 370GT Coupe, with the big brakes (Akebeno if I'm correct), and Its coming time to get new pads. Previously, I had a 2003 350GT Coupe with the stock sized brakes, not Brembos. I had custom wheels on it that were pretty open to the brakes, and when I first put the wheels on it, the rims where completely coated with brake dust. A few years after adding the new rims, I needed to change to pads on that car. I didn't do any research, but I told the mechanic of the problem with the brake dust. I also told him I didn't track the car or even drive around the streets harshley. But the dust was an issue. The mechanics changed the pads to a different compound, and the dust was GONE! The other change I noted was that when coming to a complete stop, instead of having to press harder on the pedal as I approached 0kph, I had to actually lift off a little to not come to a hard jerky stop.( My unfounded explanation is they became stickier as they heated by stopping ) Since I got my 370gt with big brakes, I noticed that that as I came closer to stopping, I had to press harder and harder to reach a full stop. I am not talking about hard, just harder. I brought the car in from another state, so when I had a blue slip done, I asked the mechanic what he thought of the brakes, and he thought they were brilliant. The only negative of these pads on the 350GT, was that they squealed when cold. So driving out of a shopping center carpark, it was a little embarrassing, as the brakes squealed, and I am sure people thought that I needed new brakes, when they were actually fresh. I have no idea of what type of compound they were on the 350gt, but whatever it was, I want to get the exact same on my 370GT. They weren't ridiculously expensive, and were replaced at the local JAX (which is no longer open), so I am certain they would be a pretty common big brand, off the shelf type/brand. My current mechanic suggested I need top get the rear pads changed soonish, but he suggested standard Brembo pads. Which I expect to behave the same as the current ones and not like the ones on the 350GT.  I don't think dust will be an issue on the 370GT. With the behaviour I describe above on the 360GT, does anyone have a suggestion of pad material that will act like the change I had done on the 350GT?
×
×
  • Create New...