Jump to content
SAU Community

Recommended Posts



Don't have kids then default_smile.png

Show us your kids. First night back to Bmx racing for a month. Told the boy it's been a while take it easy. Cruised around for 2 laps, then hammered it out the start gate didn't clear the first jump binned it down the massive Hill. 20mins. Just got home from emergency. The boy is destined to own a skyline.
  • Like 1

Show us your kids. First night back to Bmx racing for a month. Told the boy it's been a while take it easy. Cruised around for 2 laps, then hammered it out the start gate didn't clear the first jump binned it down the massive Hill. 20mins. Just got home from emergency. The boy is destined to own a skyline.


Poor bugger, sounds as good as me on a bike!
  • Like 1


Poor bugger, sounds as good as me on a bike!

Shoey divided by 100. Did about 703 metres! His knee, hip and elbow had munga deep grazes and the wrist blew up instantly. Checked out all good in X-rays. Phew. Already pushing hard for a day off school tomorrow. Haha. Bad luck. I've been crawling around in and under a dual control rubbish truck called Dennis making 4"s/s intercooler tubing for 2 days. You will be going to school. Show us your dad. Awww

Show us your kids. First night back to Bmx racing for a month. Told the boy it's been a while take it easy. Cruised around for 2 laps, then hammered it out the start gate didn't clear the first jump binned it down the massive Hill. 20mins. Just got home from emergency. The boy is destined to own a skyline.


Used to race bmx, did a few cool down laps after an event with my best mate late at night. He clipped the top of a step-up and went head first into the following tabletop. I had to scream out for an ambulance as he was out cold. No damage done tho
  • Like 2


Used to race bmx, did a few cool down laps after an event with my best mate late at night. He clipped the top of a step-up and went head first into the following tabletop. I had to scream out for an ambulance as he was out cold. No damage done tho

Yeah mate. It's a pretty extreme sport as you obviously know. Heart was in my mouth for a few seconds. He dusted it off told everyone he was fine then got on the bike and dumped it again because the chain came off during the stack. He tried to finish the lap. I was fully proud of the boy. The track out at Westside has a pretty extreme start. Best track in w.a. I think.

But crack flossing. A full team of surgeons with pointy nose pliers.

DSC_0288.JPGCheck the tube out. (from the Dennis) Intercooler to manifold intake pipe on the charge air or boost side were 4" o/d. Because the intercooler outlet and the manifold were cast pipes the I/d of the cast pipe was approximately the same as the I/d of a 3 1/2 inch 16 guage tube. They have had problems with the 4" Ali tubes being worn through and cracking from the compressor lines of the Cummins engine wearing through and losing boost pressure and rattling. I left the tube running off the intercooler at 4" like a plenum then reduced it to 3 1/2 to clear the chassis rail and compressor tubes. Still had to press a flat in it for clearance at 3 1/2 inch o/d s/s. We had to lift the chasis from the leafs just to be able to manoeuvre the tube in with a porter power because the 2ton forklift couldn't lift it. Developed 3 tubes from 316 s/s, done the drawings and jigged it up. 2 days. Tighter than a nuns I'm there. Mental.DSC_0292.JPG
  • Like 2


It'd bloody hurt coming off in Lycra


Yeah had a couple of offs now, both times mechanical failure not skill related, shit happens, first off was a big one, went over the bars as the wheel at the back came out of its lock. Last week had a front flat and didn't realise went round a corner and ate shit.
  • Like 2


Yeah had a couple of offs now, both times mechanical failure not skill related, shit happens, first off was a big one, went over the bars as the wheel at the back came out of its lock. Last week had a front flat and didn't realise went round a corner and ate shit.

Your a maniac. I reckon if I came off these days it would be crack tinkle tinkle, measure up the coffin. Haha came off and ate shit. Funny as!
  • Like 1
15 hours ago, Stinky Rooster said:

Keen as for a catch up dude. I am still spewing i missed the last one

 

Family is good. Loinspawn are starting to spread their wings at last, so i have more time to spend pantless at home, and i think that is a win.

Dale! Long time :D Enjoy your pantless time til the grandkids come around :P

  • Like 1


Yeah had a couple of offs now, both times mechanical failure not skill related, shit happens, first off was a big one, went over the bars as the wheel at the back came out of its lock. Last week had a front flat and didn't realise went round a corner and ate shit.


I hit a roo at 100ish, wasn't dressed appropriate and ate bitumen. Took me months to get over. Got gangrene weeks later. Riding in Lycra sounds scary to me
  • Like 1


Keep telling yourself that grandad

Funny story for u guys. My wife was In the xr8 on gt. eastern hwy near the casino. She took off pretty quick from the lights as she does in the 6 speed manual. She heard a awesome sounding loud as v8 next to her looked over and was surprised to see it was another lady driving a new black senator. It pulled level with her then started gassing it on and off for a race. My wife will never bite back. Unbeknownst to her and my wife the police were right behind them. Woop, Woop, pulled the commodore over. Haha. My wife panicked and thought it was for her but the police waved her on:-)
  • Like 3

DSC_0288.JPG.2d612e8f3a4019abce5b21dd450f2561.JPGCheck the tube out. (from the Dennis) Intercooler to manifold intake pipe on the charge air or boost side were 4" o/d. Because the intercooler outlet and the manifold were cast pipes the I/d of the cast pipe was approximately the same as the I/d of a 3 1/2 inch 16 guage tube. They have had problems with the 4" Ali tubes being worn through and cracking from the compressor lines of the Cummins engine wearing through and losing boost pressure and rattling. I left the tube running off the intercooler at 4" like a plenum then reduced it to 3 1/2 to clear the chassis rail and compressor tubes. Still had to press a flat in it for clearance at 3 1/2 inch o/d s/s. We had to lift the chasis from the leafs just to be able to manoeuvre the tube in with a porter power because the 2ton forklift couldn't lift it. Developed 3 tubes from 316 s/s, done the drawings and jigged it up. 2 days. Tighter than a nuns I'm there. Mental.DSC_0292.JPG.934e33e1b2456435ed5f1f9d61aedce4.JPG

One like for my fully difficult charge air tube. Hope it was my boss?



×
×
  • Create New...