Jump to content
SAU Community

Recommended Posts




I did and tried to call him , must be dating.

All I need is the bush brush but sadly it’s not separate item
, come with the arm. Not in rush , I prob can pick up straight from Japan. And I have a friend who works in nissan Wangara who can install it for me


For 1700 go to Japan and get one [emoji2]
  • Like 1
2 hours ago, ElleAli76 said:

 

 


After market? Nah I’m looking for genuine parts , it won’t last long with after market plus it’s stiffer !

 

 

Aftermarket is always better.... why fit a hks exhaust if the nissan one is better? Lol

  • Like 1
Aftermarket is always better.... why fit a hks exhaust if the nissan one is better? Lol



Now with the exhaust is different , I didn’t go with Chinese brand like what I’ve got now and FYI I didn’t have that install it was from previous owner , it’s still loud but I don’t like it as it didn’t sit very well.

With genuine Nissan’s exhaust yea it’s good but it’s not loud enough like how I want it.

So I go with HKS , it’s loud enough than the current.


Now questions - do I need to re-tuned the car with the new exhaust ? What about the horse Power , would it impact ?

  • Like 1
4 hours ago, ElleAli76 said:

 

 


Now with the exhaust is different , I didn’t go with Chinese brand like what I’ve got now and FYI I didn’t have that install it was from previous owner , it’s still loud but I don’t like it as it didn’t sit very well.

With genuine Nissan’s exhaust yea it’s good but it’s not loud enough like how I want it.

So I go with HKS , it’s loud enough than the current.


Now questions - do I need to re-tuned the car with the new exhaust ? What about the horse Power , would it impact ?
 

 

 

 A tune is always gonna improvw things, boost + ignition + fuel = power!

Edited by R33kizza
4 hours ago, ElleAli76 said:

Any internal spare parts Or engine oil I’ll go with genuine , accessories feck I don’t care , so long it’s good quality and kot Chinese emoji28.png

Are u planning on lowering the car? If u do ul need those bushes to compensate for the added camber...

  • Like 1
Are u planning on lowering the car? If u do ul need those bushes to compensate for the added camber...



Nah not really , it’s the clanking noise that I can’t stand and apparently I need those bushes
lol it’s drivable tho , it’s not like a safety concerns. Anyone wants to help me ring japan Nissan’s and found out how much ? My Japanese skills are very limited [emoji23]


Sounds like a task for@t_revz
  • Like 2



  • Similar Content

  • Latest Posts

    • SO whats the deal with this issue? I've read a heap of posts from the infinity owners in the US having full engine swaps done under warranty. Most claims are done on earlier cars than 2019 but I'm sure I've come across claims of 2020 models also having this issue. I like the 400r and Q50Red/S but can't fathom dumping close to 50k on a car with terminal issues!!! 
    • The above video is working normally. That is, that's how the right hand indicator should cancel when rotating the wheel left.
    • I noticed that I could see creatures on the moon when I turned my new headlights on. I thought I should check the alignment. It's pretty rudimentary but I just grabbed some dry wall and put it against my tablet and made sure the beam was below the height on the headlights. Ie the beam is at 600mm on my car, I just made it lower than that 7.5m away.  Not the best but it'll do until I can do it properly at the local shops.   
    • As @Duncan said - the bores are most likely to cop it. But anything can and does happen. Rods are cheap. Rods are good. The work to rebuild the motor will be 30x the price of rods. You won't notice it.
    • Yeah car has 110 on the clock. That said the front turbo (that exploded) doesn't seem to be the original, it has a S1 part number but the car is a series 3. Yep, in the cat is where I first found the turbine wheel pieces - a couple decent sized ones, then a whole lot of fragments.  I agree, probably makes sense to upgrade parts that are being replaced. Things like rods would be 'nice' but realistically it seems unlikely they would need replacing. I was hoping that it was a case that they generally f**k up the valves but not the bore, or vice versa. Is it generally the scour damage rather than ceramic bits getting mashed into the piston tops / valves? I tried a search but couldn't find any threads with pics from the guts of a motor that's had this happen. 
×
×
  • Create New...