Jump to content
SAU Community

Recommended Posts



It was one of the first films I had on DVD.

Will there be cake?
Metallica cunning stunts on ps2. Couldn't believe the quality through a Scart connector and 68cm t.v. With analouge Yamaha amp.
You need the rainbow licka sticka first.
If it doesn't stick the first time you just need to lick the back of it over and over until your jaw locks up. Then boom fully sticky fully qualified. Might take 4yrs.
If it doesn't stick the first time you just need to lick the back of it over and over until your jaw locks up. Then boom fully sticky fully qualified. Might take 4yrs.
Suppose there is no need to explain to a auto electrician to the stars:-o
2 hours ago, Beyond Blue R33 said:
3 hours ago, Beyond Blue R33 said:
If it doesn't stick the first time you just need to lick the back of it over and over until your jaw locks up. Then boom fully sticky fully qualified. Might take 4yrs.

Suppose there is no need to explain to a auto electrician to the stars:-o

you'll need to speak slowly for me

ohai

what do you know about getting custom spokes done? Got a woof in the front rim, was going to motard it anyway, so was thinking of slotting a 17" hoop on the front. Problem is, I need to keep the speedo drive in the front hub, so swapping a YZ rim is not an option

ohai
what do you know about getting custom spokes done? Got a woof in the front rim, was going to motard it anyway, so was thinking of slotting a 17" hoop on the front. Problem is, I need to keep the speedo drive in the front hub, so swapping a YZ rim is not an option


So you have a 19” rim and wanna fit a 17” rim with spokes to suit?
24 minutes ago, t_revz said:

 


So you have a 19” rim and wanna fit a 17” rim with spokes to suit?

 

Nah, 21" front hoop to a 17" hoop

Brake clearance etc is already checked, and rim sourcing is easy, just hit a wall when trying to find spokes. I am thinking they will have to be made? Or do you know if mine can be shortened and rethreaded?

 

Nah, 21" front hoop to a 17" hoop

Brake clearance etc is already checked, and rim sourcing is easy, just hit a wall when trying to find spokes. I am thinking they will have to be made? Or do you know if mine can be shortened and rethreaded?
 


Why wouldn’t 17” standard spokes fit?

Because angle out of hub is too far in compared to standard?
2 hours ago, Stinky Rooster said:

Nah, 21" front hoop to a 17" hoop

Brake clearance etc is already checked, and rim sourcing is easy, just hit a wall when trying to find spokes. I am thinking they will have to be made? Or do you know if mine can be shortened and rethreaded?

 

If u can find someone who already does the wheels or a model of bike that already has motard wheels the u could buy the spokes from a dealer

5 hours ago, t_revz said:

 


Why wouldn’t 17” standard spokes fit?

Because angle out of hub is too far in compared to standard?

 

standard 17" hub has no speedo drive, so its about half the diameter and about 2/3 the width. 

3 hours ago, R33kizza said:

If u can find someone who already does the wheels or a model of bike that already has motard wheels the u could buy the spokes from a dealer

 

We think very similar

Unfortunately, 17" rims on XT's are usually acheived with an entire YZ460  front end swap as you get upside down forks of the correct length, a triple tree that bolts straight on (and has steering damper options up the wahzoo) and a 17" rim

What you dont get, is a speedo drive. This is usually sorted with a $500 electronic dash, but its actually a stickerable offense to do this, and I dont have the coin for the dash or a crumpled YZ anyway.

Plus, speccy upside down forks and a front disc setup designed for dirt, isnt really going to match the rat rod/street scrambler vibe I am going for

 

12 minutes ago, Stinky Rooster said:

standard 17" hub has no speedo drive, so its about half the diameter and about 2/3 the width. 

 

We think very similar

Unfortunately, 17" rims on XT's are usually acheived with an entire YZ460  front end swap as you get upside down forks of the correct length, a triple tree that bolts straight on (and has steering damper options up the wahzoo) and a 17" rim

What you dont get, is a speedo drive. This is usually sorted with a $500 electronic dash, but its actually a stickerable offense to do this, and I dont have the coin for the dash or a crumpled YZ anyway.

Plus, speccy upside down forks and a front disc setup designed for dirt, isnt really going to match the rat rod/street scrambler vibe I am going for

 

Im a motorcycle technician by trade. If u dont need the bike ur best bet would be to buy a 17" wheel then find a wherl builder to swap the hubs. 17" fitment with ur original hub assebly.

  • Like 1

Yep, I am hearing you, but I am looking down the barrel of spinal fusion, and am off the bike for 6 months so I am really needing things to do to it, (because if I dont pull it apart I am going to end up trying to ride it, plus) and need shit to keep me busy




  • Similar Content

  • Latest Posts

    • Oh bugger ! Your right ! Good old hydrogen sulfide. Takes me back to the good old school days ! 
    • I've owned a few scooters over the years, a Vespa PX oil burner was my first scooter, followed by a few others, including a little 50cc BeeWee that I used as a barracks bike, and I've had a blast on all of them, they really are the cheapest for of city/suburb transport around The only issue with scooters in Australia is lots of people look down on them due to their size,  maybe they need a big bike to make up for something else where they are lacking, unlike Europe and Asia where every man an their dog owns one, and now that filtering is legal in NSW, local traffic is never a issue Not to say I haven't owned my share of big cc bikes over the years, but they were for more blasting through the hills or Hwy riding where it needed to sit on Hwy speeds Safety wise, I ride like everyone is always trying to kill me, everyone is running a red, or running stop/give way signs, or generally asleep at the wheel, which most people are duringtheir commute, I also ride really safe, and give myself, and everyone else enough room in case I need to pull some hasty evasive actions, I've done a few rider training days over the years, which has come in handy on more than a few occasions  As for mods, there's nothing really, and yes your right about aftermarket exhaust, all you get is loud and obnoxious noises from them, like every 250-300 cc you hear with a aftermarket muffler, in saying this I did put a rear muffler from a 125 Aprilla on one of my old 125 scooters, it was horrendous and no amount of full face helmet and ear plugs would dampen that noise As for coming from the Harley, and what a overpriced POS that was, I no longer do big rides as my poor old busted joints ache after about 1/2 an hour of riding, long cruises are so much more enjoyable now in a car, so a big bike would be pointless   
    • Oh wow, it's easy to forget how cheap these can be. Probably the cheapest way to travel. Though people in cars here tend to be morons and I would not feel very safe. Were scooters ever big in Australia? It used to be the thing growing up in Europe ~20 years ago. 50/70/125ccm Peugeot or Yamaha and some others. Utterly obnoxious Polini race exhausts. Kick stands that slant as much as possible. So loud. So much noise for really not moving very fast at all. But it felt cool at the time. Not sure where I'm going with this, but there is an aftermarket for mopeds! Though I'd have pictured you more for a Goldwing kind of guy after growing out of the Harley.
    • You need to know I am sorry for this.  
    • As the MX5 isn't apparently "manly" enough, and I need something for runs to the local shops, and also take to my part time job at the salon, basically I can keep the MX5 away from car parks and stuff......like "flying lockers", I was wondering what I could buy to fix this issue LOL, I pick up a new Yamaha 125 Delight this arvo from Trooper Lu, basically a R1 that you can fit a slab of beer on between your feet, also, it was $29400 cheaper than a R1, so actually it's 2 x better than a R1    
×
×
  • Create New...