Jump to content
SAU Community

Recommended Posts

Hi guys new to SAU, Just signed up.

I'm looking to buy a skyline and I've been looking at one which is immaculate, It's owned by my mate, Has just had a fresh Respray, It's completely 100% stock apart from an immobiliser and alarm system on remote, The readout says 40,xxx kms but I'm not sure if I should trust them or not?

Engine looks to be in good condition aswell, Has been compression tested, He's recently rebuilt the head aswell as general maintainence, Replacement of fluids, ect.

Now I'm looking to have this as a daily driver, I've tried searching for this topic and have found information but it's all mixed opinions.

What are your thoughts on an R32 GTR in terms of daily driving and reliability? All I've managed to read about is some people saying you'll need to rebuild the whole engine which is big $$ and others saying it'll be fine?

I'm not looking to do any serious modifications at the time being so it will be left stock.

Could someone please elaborate on the issues that they may experience ect? I'm new to jap cars especially skylines, I'm a mechanic by trade but still not sure on the 26's.

Thanks guys ✌?️

Link to comment
https://www.sau.com.au/forums/topic/456637-buying-an-r32-gtr-help/
Share on other sites

Get the underside of the car checked for any worn bearings/bushes and potential rust issues that the car may have. If it has plenty of those that you can't see just by going around the car then you could be up for some work.

Also the 40,000km is likely to be BS, most likely closer to 150,000km or more, so if you really wanted to know the true value before it was imported you can do the Japanese History/Rego check thing and you can get the Auction Documents for a small fee. You'd be able to guess with certain things on the car aging the difference between "40,000" and the unknown true value.

Secondly if you are daily driving and the engine is in good condition, verified by a compression test, then needing to rebuild the whole engine is a load of shit, it's like driving another car, except if things break or you want to do things it will cost you a fortune compared to other dailies.

If the car is in good condition and you purchase it and it's fairly stock, daily driving shouldn't be an issue. Just make sure you keep up regular maintenance intervals and check over the car frequently to make sure it's all running well. Quite easy to do a fair amount of things on the RB yourself just read up if you are unsure.

I Daily drive a 33 gtr currently and the car is reliable just like any other car with maintenance, but when you start wanting to modify it you have to take it off the road and need some other form of transport until its ready again. My car sits fairly low and I have some problems getting up driveways and jacking up the car requires 3 stages.

If your a mechanic just look at issues other 25 year old cars have. Heater hoses, clutch, leaks, etc.

And then look how annoying it is to repair that on an rb26.

Gho5t daily drives a 32 gtr and will likely add his input soon.

I daily'd my GT-R for a year and a bit, get ready to pay for petrol (avg. 14L/100km).

Apart from that, if suspension is relatively standard, it's fine. I have a heavy arsed clutch and stiffer suspension, bigger wheels/low profile tyres and some suspension bits changed.

But Sydney's shitty roads and traffic will leave you shitty after the drive.

Reliability wise, they're fine. No different to any other turbo car (maintain it properly and it'll be fine).

My car has ~150,000 import km, AFAIK unopened engine and standard turbos/boost/ECU/etc.

Yeah most work I'd be doing myself to be honest, As long as it's nothing major.

My mates got all the paperwork and import papers ect for it, What's this Japanese rego thing? If anyone has a link that would be great.

Sounds like it should be fine as a daily, I'm use to rough roads and I'm sure I'll get over the traffic, I'll keep up maintainence obviously and won't be modifying it for a while, I want to keep it stock until I get a really good feel of the car,

Spending 3 hours in traffic everyday was shithouse, so glad I train it to work now.

Drive around normally and it's no different to any other AWD turbo car. It's when you start shoving more air and thrashing the crap out of it you'll run into trouble, like any other car.

He's a good mate of mine, He's had a full Respray done with rust cut out of the wheel arch, quarter panels and rear window sill.

Head was rebuilt as he noticed a hint of oil in the radiator and as a precaution did the head gasket, didn't seem to be the issue but the Problem seemed to stop after that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
×
×
  • Create New...