Jump to content
SAU Community

Recommended Posts

http://www.users.on.net/~goofyhsk/info/chassis_plate.html

You can use that as a guide on how to decode the plate and what each letter means. For that plate I have no idea what the last 3 letters mean. But seems like a Standard GTR that's imported.

If it was ADM or Nismo, etc you'd notice the letters would have a certain combination, etc.

BNR32002355 would indicate an early run from 1989. These are in demand in USA now.

Model# alphanumeric indicates what it came out of the factory with.

See if "Iron Chef Imports" might export it for you to the State, depending on its condition. In the USA he's known as Iron Block imports

You should have an import plate also as Terry said in addition to the build plate. Once a car is registered in Australia for the first time though the import plate doesn't have to be displayed either after that.

If in doubt you can always check the VIN number on Nissan Fast or something to confirm the status of the car.

Once the car is registered it will have all the compliance details attached to it as it's required.

Edited by breaker1845

lol the fact that he would have payed plenty for an aust delivered, if he didnt pay through the nose and some how ended up with one and never realized it... he would have won at life.

i have however wandered how much my 89gtr would be worth in the USofA this year....... just y'know.. wondered :)

It's gun metal grey so it's an import

Aussie ones only came in red, silver and black. Apart from a couple that were used as pace cars that momo did a few things to and they were green

Also if it was brought in under the 15 year rule (before it was changed) it won't have an Australian compliance plate

There is a thread for getting VIN's fasted you can post in if you don't mind waiting a day or so to get the results back.

Ghost posted the link earlier, just go to the last page and add the VIN you want fasted I guess. Should provide most of the details.

If the car is currently registered in a state you can also go to the state government website and do a quick check with the VIN for details regarding compliance and security for free or a small fee usually.

Edited by breaker1845

almost no need to fast bud. we practically share vins.

post-60068-0-78905100-1432083207.jpg
20150201_173054_zpswudvduj6.jpg

K: Coupe

B: 2.6L (GTR)

N: Super Hicas + Attessa

R32: 8th Generation Skyline
R: 2 Doors

X: GTR (16 Inch Wheels)

F: 5 Speed Manual
S: Intercooler + Turbo + EGI
L: Fog Lights

then it gets choppy...

mzg

GH05T, on 03 Feb 2015 - 09:51 AM, said:snapback.png

ok more research shows allot of conflicting info

M: Limited slip diff/ rear wiper less (which i have) ???

Z: Cold weather pack/ early n1 spec ???

G: still nothing

GH05T, on 03 Feb 2015 - 10:41 AM, said:snapback.png

so more info suggests the following

M = P+Q (Climate control + upgraded sound)

Z = Cold pack? heated side rear view mirrors

G = B+D (ABS + Visc LSD)

still unsure as M states elsewhere about the wiperless windscreen which i do have.


never found out for sure.
.... but yours has a rear wiper, mine did not. otherwise almost identical base cars.

Edited by GH05T
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...