Jump to content
SAU Community

Recommended Posts

What's with the bonnet margins Bob, poor bodywork or did he forget to close it.

No....... Just a sh!t fit!

EVERY importer says the same thing........ "We get everything checked out blah blah blah"......

They can't even align the bonnet. So yes at best a respray and worst who knows.

Bob.

post-78207-0-82195700-1432464712_thumb.jpg

true Bob

Drivers door doesn't sit flush when closed, bubbles in the dash.

"We import the best available" " You can Redline and it wont blow up "

Sure ?

Be a fair few of the pre 90's in the US of A rebuilding engines and replacing oil pumps and extending sumps.

Taking marketing lessons from Edward Lees huh?

I'm sure the Japanese will only sell them the best examples!

Perhaps we can expect a busy influx of North American SAUers?

I think I should dust off my welcome mat!

Anyone here need to sell spares across the Pacific?

Japanese Classics is probably the best importer when it comes to marketing right now since they have this and they sold an R32 to a writer for Jalopnik. I know they've had plenty of satisfied customers but saying they only bring over the best is marketing BS and anyone who just swallows that drivel here in the US is getting set up for disappointment. The truth is, because of the 25 year rule, we're basically scrounging for the leftovers at this point. There are still some nice R32s out there but most will need restoration to some degree and parts aren't "just around the corner" like this video says. I've been able to get the parts I need but I've done a lot of homework and talked to a lot of people to do so.

I'm seeing a lot of guys here in the US buying or wanting to buy these cars and I'm not sure all of them are informed enough about what they're getting into and this video doesn't help. I bought my Nismo knowing I'd have to do some restoration and with the full intent of doing so. I think a lot of buyers may end up just being overcome by nostalgia and then find out later it's not easy owning a JDM car never sold here in the States, especially one that's seen 25 years of use (and abuse in a lot of cases).

Looks like a crappy flimsy aftermarket bonnet, probably some bad fibreglass copy. Otherwise pretty standard cheap auction car LOL

Lets hope a bunch of imported 32's don't start showing up at all the "stance" circle jerk events, hardparked with airbags and wheel poke

Japanese Classics is probably the best importer when it comes to marketing right now since they have this and they sold an R32 to a writer for Jalopnik. I know they've had plenty of satisfied customers but saying they only bring over the best is marketing BS and anyone who just swallows that drivel here in the US is getting set up for disappointment. The truth is, because of the 25 year rule, we're basically scrounging for the leftovers at this point. There are still some nice R32s out there but most will need restoration to some degree and parts aren't "just around the corner" like this video says. I've been able to get the parts I need but I've done a lot of homework and talked to a lot of people to do so.

I'm seeing a lot of guys here in the US buying or wanting to buy these cars and I'm not sure all of them are informed enough about what they're getting into and this video doesn't help. I bought my Nismo knowing I'd have to do some restoration and with the full intent of doing so. I think a lot of buyers may end up just being overcome by nostalgia and then find out later it's not easy owning a JDM car never sold here in the States, especially one that's seen 25 years of use (and abuse in a lot of cases).

A few random things.

1. If you had have seen the rubbish that was imported to Straya under the 15 year rule (1989 & a few 1990 model R32's) you would have a healthy scepticism for anything that is left. To be honest I don't know whether or not we got all the crap ones or just all the 89 MY 32's that were ever built. If it were me I would wait for a 1991 version as supply will increase greatly I would have thought as they were mostly not allowed to be imported into Oz.

2. Parts are pretty easy, all things considered.

3. Nostalgia is most of the reason for owning an old car. Most old cars are never restored properly - R32 being no exception.

4. Most cars ont he internet look better than they do in real life. It is only by owning something that you get to know its faults down to the tiniest missing nut, bolt or washer. This was reinforced to me when the owner of a car I thought was the business said of an oil leak "It was only the old dipstick being pushed out of the holder". Well that is ok then. May need to reconsider my position in the whole stand up shouting match I had with my ex engine builder about that very thing.

  • Like 1

If it were me I would wait for a 1991 version as supply will increase greatly I would have thought as they were mostly not allowed to be imported into Oz.

Very true....... Not too many people know this.

Due to the Australian delivered cars being sold at the time, R32 GT-R's built between July 1 1991 and June 30 1992 are prohibited imports.

I wonder how many have come in over the years to end up as expensive track cars?

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To be fair passengers who aren't silly and have been in proper fast cars have often been pretty impressed once you hit 4th gear   
    • I suppose that's true. Barring almost any situation, I'll never sell so what the market does is kind of irrelevant to me. It's possible I'd make most of my money back. That spreadsheet I mentioned? Maybe I could make back more than what the car's total costs thus far are, but the parts and all that is possibly a different story... Thanks for reading. It was certainly a good moment and just makes the ties to the car that much stronger. It's exciting that the option will be there to bring it over, however I have some plans with a shop that may end up keeping the car there longer, not sure. Coupled with the fact I want to move there and haven't solidified any path yet. So in a way, it feels like I'm in a limbo state that is uncertain; time will tell.
    • No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
×
×
  • Create New...