Jump to content
SAU Community

Custom Instrument Cluster - Legal?

Mind_Reader7
 Share

Recommended Posts

Mind_Reader7 Newbie

Mind_Reader7

Posted
Posted

I bought an 89 Mazda 121 with a manual transmission, and I want to install a tachometer. Easy enough job, but I don't want to halfass the job. I want to make my own instrument panel with new gauges, which is also easy enough. However; a friend claims that if my car gets a yellow sticker for whatever reasons, and I need to pass the pits, a custom instrument cluster is a red flag, and I won't pass. Can anyone give me any information regarding the WA law on such things? A link to general things you get failed for would also be nice.

Thanks in advance :)

Link to comment
https://www.sau.com.au/forums/topic/457080-custom-instrument-cluster-legal/
Share on other sites
Mind_Reader7 Newbie

Mind_Reader7

Posted
  • Author
Posted

If an 89 121 got defected you would put it in the bin and move on.

Correct. It's just a project car. My goal is to make it like the kid who dress in a tuxedo to go to his prom, but is wheelchair bound with cerebral palsy. Retarded and everyone can see it, but dressed up nicely.

Basically as many unnecessary accessories as I can fit into the worst car I can find. Scissor doors will be one of them.

Still looking for advice. Can I make my own instrument cluster legally or not?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By joshuaho96 · Posted

      I know mentally you're set on the ATS clutch but honestly I'm a big fan of the Nismo Super Coppermix Twin. It's much cheaper and in some ways I think it's a better design for a street/circuit car.
    • soviet_merlin
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By soviet_merlin · Posted

      Just checked in first post and you should be able to bring it home November this year, right? I'm amazed you made it through four years of this. As hard as it feels now the rest will go by in a breeze in hindsight, I'm sure.
    • BaronOBeefdip
      Baron's R34 GT-R build thread - car in Japan for 5 years -_-

      By BaronOBeefdip · Posted

      Realized I haven't been back here in a while. Still here, still alive, still waiting for the car.  I went back again the only time last year from Oct-Nov for R's Meeting and drove it around some more, including a few laps on Fuji Speedway(in the wet, sadly). The car still feels good, but have a couple small things to address. I've been getting more parts but have slowed down still, and most of the bigger purchases are now out of the way. I find myself getting impatient more and more when it comes to getting started on this project; it's quite hard for me not being able to really dive in and start making this car my own because it's halfway across the world. At times it doesn't even really feel like I own one of these. Haven't really been motivated or had the desire to document the last trip on here or social media for, well, reasons... but here's some pics...it's also still alive and well as you can see: I've narrowed down to the last large part purchases(anything over $2k) before the engine build to be: 1) Ohlins Road & Tracks 2) ATS Twin Carbon clutch 3) Endless BBK with some custom options and 4) Kansai Service carbon driveshaft I don't think the budget exists for all of these this year, but I'll try for one or two items I think. Though, every time I look at my spreadsheet I sigh, shake my head, and get depressed just that little bit more.  'til later.
    • Shoota_77
      R32 GTS-t RB30 sedan

      By Shoota_77 · Posted

      It's a stunning location!  I've been to NZ twice but haven't made it to the North Island yet.  Definitely on the cards but the South Island is hard to tear yourself away from too... Looking forward to see what you can wring out of it once you can get it to hold together!  Be awesome to get a low 11 or even sneaking into the high 10's pass out of it.  That's a bloody quick car that most people will never experience in their life.  Enjoy!
    • joshuaho96
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By joshuaho96 · Posted

      Nominally yes but I’m not really at that stage yet. Outsourcing to Japan is also a relatively good deal at the moment because their currency has devalued much more against the USD.  You would assume this but a lot has changed from the pandemic. Mechanics are in short supply and demand for fixing old cars has gone up from the cost of new cars. 250-300 USD/hr is not an unusual shop labor rate in California and you’re paying that regardless of whether the guy is competent or not. Coworkers have been quoted 3000 USD for a water pump and thermostat at a dealer on an N54. Oil changes went from ~75 USD to 150 on fairly normal cars like Civics. The cost of the oil and filter hasn’t even kept up with inflation.
×
×
  • Create New...