Jump to content
SAU Community

Recommended Posts

Ummm I take it ur all city people? Its just taken me over half an hour to read this entire thread and i finially relieased something...Im damn lucky to be livin in the country. Admittingly i dont exactly have a "high performance" vehicle (Stock R31 :) ) but if i wanna do somthing stupid all i have to do is go out the bush and go nuts for a while, get a bit "too" much sideways, scare the crap out of my self and i drove around slow for the next couple of weeks or so, remembering how close it was until i nearly wrapped it around a tree (its never happened so dont ask ;) ). Until of course the confidence creeps up again, then its back out the bush :P.

Other than that everything said in here is valid one way or another. As for stopping us (P platers) doing stupid things? U can't, so instead give us oppurtunities to screw around...private properties, bush :) or even supervised runs at tracks. But of course this will only stop the majority of us doing stupid stuff and not the crazy ones on a death wise....also im all for driver training, but can never seem to find the money.

  • Replies 131
  • Created
  • Last Reply

Top Posters In This Topic

Guest jimmyd17
As for stopping us (P platers) doing stupid things? U can't, so instead give us oppurtunities to screw around...private properties, bush :) or even supervised runs at tracks. But of course this will only stop the majority of us doing stupid stuff and not the crazy ones on a death wise....also im all for driver training, but can never seem to find the money.

lukeskyline, i think thats a very good point you have made that no one has touched on thus far. If some emphasis was put on making places available to have our fun in a controlled environment, then that could very well help reduce excessive speeding on public roads. There would be really no want or need to do that if there were easy enough access to more tracks open.

The following points are what i believe would have the largest impact on making safer roads and reducing road deaths and injuries:

1. Compulsary Advanced Driver Training as part of a licence test. I think some of the millions upon millions of dollars raked in from fines should be spun around and put in to a safer road programme for newly licenced drivers because it is way too easy for anyone to get a licence these days.

2. More affordable tracks/places for people to drive fast in a controlled environment.

3. Less emphasis on harsh penalties for MINOR speeding offences. People tend to concentrate more on being under the speed limit than actually concentrating on traffic and driving.

4. Get rid of those damm traffic light speed cameras. The number of times i have seen accidents almost happen because people slam their brakes on in fear of being snapped a couple of k's over is rediculous. I think 'Red Light Cameras' are ok, but the speed cameras at intersections cause more problems than they solve.

5. No fixed speed cameras. Again, people tend to spend more time looking at their speedo than the road.

another 2 cents for the jar :headspin:

- James -

i was looking at purchasing a mate a few track days at eastern creek / oran park and apparently they wont let a p plater drive on the track. thats the main obstacle as to why its hard to get a track for p platers. secondly, it should be alot cheaper, as most p platers have to juggle uni fees, a job, and most of them are passionate about their cars and pour money into their cars. a combination of all these factors accumulates and eventually they dont have any money to spend on their trackdays.

Guest jimmyd17

Hmm that is quite strange. I don't understand why they wouldnt let P platers on the track. I was barely 16 just on my L's and out there doing laps at calder. If this is the case, that is rediculous. I think the government really needs to put some effort in to having more tracks available and affordable specifically for L and P platers.

k a few things

bout better driver training, does ne1 know how to fly a Jumbo jet????

when u start off flying u can only fly light aircrafts,

u have to go through many stages of learning b 4 you can fly a jumbo. Why not apply the same princaple to the roads?

say everyone has to learn in the small car or low powerd sedan and pass to get say an A grade car licence

then to move up to a B class (higher powerd cars like a stock commy or falcon)

they must complete a more rigorous test and more advance training.

To get say a c class licence (high powered cars, turbo or lage capacity)they must take everything a step further. ie better training and the like

k sure its gonna coast allot more to get ur licnece to drive say a line but if anyone is serious about their cars such as enthusiasts like us (spelling?) they will spend the time to get it!!

this system will filterout heeps of unwanted ppl from high powerd cars, like daddys little boy in the r34GTR at 17 years of age. and the ppl who buy high powerd cars just cause they can and hoon them abround all the time.

Also the time it takes to get the 'C' class licence will enable the new P plater to spend more time on the road and get more experience driving b 4 they get into a high powered car, and when they do get their Line they will appreciate it more as well as b far far far better drivers than otherwise.

Some ppl wil hate me 4 this but i reken that insurence should get into ti aswell perhaps they will agree wiht the goverment to only insure highpowered cars if the registered driver/s have 'c' class licences.

cerfews (spelling) wont work and are just plain freaking stupid! what if a new p plater has to drive his sick sister to the hospital to 3am

power restrictions are a decent idea something similar to mbike laws in japan, however i believe that the idea above is better suited to educating drivers not just preventing them driving highe powerd cars till they are older.

just an idea iv had 4 a while now what do you ppl think????????????

Guest jimmyd17

hey pistolpete, your idea seems quite good to me. Having a class of licence system combined with advanced driver training so only people that have passed all the advanced driver training stuff are able to drive powerful cars. if insurance companies wont insure people for powerful cars if they havent got the right licence class also cant be a bad idea. and ur right about the curfew thing. what a joke! I think the whole licencing system needs to be seriously looked at and be reconstructed. Sounds like a good way to start to me

:P

- James -

curfews wont work and are just plain freaking stupid! what if a new p plater has to drive his sick sister to the hospital to 3am

According to the restrictions that they are trying to push for P plate curfews, there would be nothing wrong with the "new p plater" driving his sick sister to hospital at 3am.

Part of the restriction is passenger based, meaning that you can't have more than 1 passenger after a certain time of night.

well she must have some sort of driving ability to be a L plater and do 200kmph. she just got unlucky and got caught i guess. who here hasnt done 200 on a public road before?? If she likes speed she should join a car club and do some laps, alot safer and cheaper...

well she must have some sort of driving ability to be a L plater and do 200kmph.

It doesn't take much skill to push a pedal

who here hasnt done 200 on a public road before??

...and I'm sure you'll find that some people are actually responsible and have some regard for the law, their own life, and the life of others, and don't use public roads as their own private race track.

Ok.

I've driven in the UK for most of my life, and have a couple of small points to add.

UK roads may be small, but they are not downright dangerous, as some NSW roads seem to me.

In both the mrs' car, and my line, I have been scared witless by the stupid moves that some younger (and older drivers) do on the roads out here.

I'm now based in Bathurst, which sometimes seems to bring out the worst in some people ;-)

UK insurnace will *hammer* L/P platers. This is partially due to the level of P-platers not being insured.

A good example is a L/P plater being insured on a 1L n/a car in the UK is 1000-1600 UKP ... which is $2400-4000 AUD !!!!!!!!!

With some companies, that's not fully comp either!!!!

(3rd party, fire and theft - no CTP in the uk, only the one ins)

You can get round it by being on the parents insurnace, but when you go to get your own ins a few years later, it's usually 1000 UK or more for a POS car, not a 'line.

When I got here, I fell over at how cheap insurance was! I got a line, (The car I always wanted, but couldn't afford it in the UK) - and because my previous company had not sent my NCB details across, had to be insured with 0 ncb's, and that was about 2K AUD....!

The first time I saw a P plater with a 'line, i fell over, I had no idea how!

I *fully* support a 'class' on car licences, and limits, similar to the bikes, as it seems to work. (in the UK, the first 2 years the limits were introduced, the accidents due to new drivers dropped by over 50%)

Being allowed full access to a high powered car while I was younger would have quite simply killed me - Fact.

in the UK, a 2-2.5L Fiat is considered quick, and I did have some *wow* moments in that, but exceptions for work vehicles should be considered IMHO, as they are needed for time to time, and also needed as part of your job.

My 2c for the mo.

- Zebbie.

According to the restrictions that they are trying to push for P plate curfews, there would be nothing wrong with the "new p plater" driving his sick sister to hospital at 3am.

Part of the restriction is passenger based, meaning that you can't have more than 1 passenger after a certain time of night.

I"m pretty sure they'd make allowances for that sort of emergency as well. Cops may be arseholes, but they're not inhuman.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You have found the problem. The wire from the switch to the HB is shorted to earth. Now you have to physically find it and replace it. It won't be the switch, although following the steps above (and yes, where you ask, that is the light switch on the RHS of the binnacle) will rule it out for sure. Or not, if perhaps the switch has melted. But there's no route to earth inside the switch, so I can't see how it would.
    • I did read your post, a few times actually.    Done. Followed this step. [Negative probe should be on the cars chassis. Positive on the wire.]   Did this partially.. now that im reading this over, i only unplugged the LED lights. [Start as said above by unplugging everything (unplug the lights, and switches.] When you are talking about the switch, you're talking about the knob thing on the right side in the drivers seat right? If so, i need to take that apart?  [Now at the switch, there is a wire from the fuse, to the switch, so out your positive on that terminal. It should read open circuit. If it reads something, especially a stupid low value, the short is somewhere between the fuse and the switch.] At this point are you referring to the connector by the headlights?  [If that's fine, now put the positive probe on the wire that goes to the headlight (at the switch plug). If it reads stupid low, the fault is from the switch, to the headlight.] Did this. I can confirm that the LED lights aren't the issue [Another quick test, is take the whole LED light setup from the left, and plug it into the right side, does it still blow the fuse? If you put the right hand side led light setup on the left hand side wiring, does the left hand side wiring now blow?  If the blowing fuse swaps from right to left doing this, your LED lights are the issue.]
    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
×
×
  • Create New...