Jump to content
SAU Community

Recommended Posts

Yes i do. Lol. But i also have lots of cars. This is for my gts4 that i just brought back from the dead. Im running small 550 injectors and using a power fc. I know to make about 500hp using no dyno, but on my other gtrs im aiming for way more than 500hp. But on this car (gts4) i just was wondering if i need to use z32 afm for 22 psi. Thats my goal. Ive done 25 psi on rb25 wit z32 afm and the motor still going to this day. Just need to know if the twin stock r32 afm will handle 22 psi.

post-37293-14335469666703_thumb.jpg

Max psi? 10000000000

Air FLOW meters measure flow not pressure. They can read 'x' amount of flow. Need to know what turbos are being used

This is why AFM's are usually talked about in terms of how much power they will handle as air flow is pretty much directly proportional to power. The more air you get in the engine, the more power you can achieve etc etc

Edited by 89CAL

The motor is freshly built. All stock other than oil mods and acl race bearings, mls head gasket. I did it all with spare parts around the yard. Doesnt mean i just want to just blow it up. Lol. I will tho. Kml. Im sure ill figure it all out tho mate. Worst case is ill just run twin z32. But was wondering as i have like 12 oem afm for gtr's. Oh internal parts are all new. Not old. :D

post-37293-14335485889308_thumb.jpg

The motor is freshly built. All stock other than oil mods and acl race bearings, mls head gasket. I did it all with spare parts around the yard. Doesnt mean i just want to just blow it up. Lol. I will tho. Kml. Im sure ill figure it all out tho mate. Worst case is ill just run twin z32. But was wondering as i have like 12 oem afm for gtr's. Oh internal parts are all new. Not old. :D

Courtesy Paulr33's website:

Rule of thumb for Air Flow meters RWKW (you will note a single RB25 AFM will measure more than a single GTR AFM)

AFM Max Power at 5v Single RB25 AFM 225rwkw

Single Z32 AFM 350rwkw

Single Q45 AFM 300rwkw

Twin RB26 AFMs 300rwkw

Twin RB25 AFMs 450rwkw

Twin Z32 AFMs 511rwkw

Twin Q45 AFMs 600rwkw

Thanks for that mate. These are in rwkw. Simple conversation. Looks like twin r32 afm will max out but could work, but at there limit. Hmmm. Funny to see that a singal z32 is at 350 figure twin would be at 700 but its at 511 in twin set up. And twin q45 is at 600. Is this wright????

twin rb25 is great for resolution.

twin z32 are generally over kill (unless needed) and in many setups you end up using only 1/2 to 3/4 of the scale and lose tune resolution.

i would much rather the AFM scale be @ 90% max than at 50% max

I started to look at the flow charts for the holset and a gtx35r. Looks like there will be about 15 to 20 LB/Minute difference from about 22 psi.

Im trying to compare it to my r33 gtr thats running twin z32 afm with gtx3582r turbo.

Damn i wish i had a better turbo laying around. :(

post-37293-14335879561466_thumb.jpg

post-37293-14335879699759_thumb.jpg

Yeah there is actually.

Series one is a 4 pin while series 2 is a 3 pin pink label.

I think Nistune has it listed for an extra 20 HP or so

So the R33GTST S2 has the pink label, and the S1 has the green label, which is also used by the RB20DET and RB25De, just for clarity.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Interesting, I've heard complete opposite on my end. Bit of a lottery I guess.
    • Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • https://files.fm/f/5atwkuvcjd
    • Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
×
×
  • Create New...