Jump to content
SAU Community

Dry Sump Oiling Systems

rcs_888
 Share

Recommended Posts

rcs_888 Rising Star

rcs_888

Posted
Posted

Hey Guys,

Currently going through my build and I'm going to be making a Oil Tank soon. Plan Is to be about 500mm Tall and about 220mm in Diameter. so it would be a 10L tank and that means that i will be able to run approx 7L in the tank. My main question is Tank Location, Does the tank have to be above the pump pressure side inlet so that it will gravity feed or will it be okay to run it level? My plan is to run in behing the 'B' Pillar of the roll cage. After doing some corner weighting with me in the car i need to add some more weight to the back LHS. But i dont want to be having to run a oil hose upto the tank if it has to be half way up the rollcage.

Cheers for your help guys

Link to comment
https://www.sau.com.au/forums/topic/457300-dry-sump-oiling-systems/
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
PN-Mad Grand Master

PN-Mad

Posted
Posted

Yes but from fluid dynamics, the longer the pipe the more the pressure drop.

It isn't pressurised. It's just a header tank for the pump that is in the engine bay.

As stated above. Place in the boot, on the left. Purpose of this is for the best weight balance when corner weighting.

post-76224-0-81545600-1436651160_thumb.jpg

rcs_888 Rising Star

rcs_888

Posted
  • Author
Posted

Yeah the fluid between the tank and the pump is under no pressure at all its only a gravity feed to the pump.

Yeah that was the idea just wasnt sure we have corner weighted it an we have moved the battery placement further back and the firebomb back so adding another 15kg to the back pass side will be awesome for corner weight. My main concern was having oil get to the pump but solong as the pump is below the oil level in the tank and no part of the oil line goes above oil level in the tank gravity should feed the pump no problem

PN-Mad Grand Master

PN-Mad

Posted
Posted

No, not my car mate, just an image I've pull off the net.

All the supercars run that style setup.

Fit a electric oil warmer in the tank too, just plug it in 1hr before you want to start, and bingo, warm oil ;)

  • 2 months later...
  • 5 months later...
rcs_888 Rising Star

rcs_888

Posted
  • Author
Posted

Bringing this back from the dead abit but you guys had a fairbut of knowledge on the dry sumps. Obviously pump at the front tank at the back. How would i go having an oil filter on the scavenge line in the boot then a cooler then into the tank? or is it best to have the cooler and filter closer to the motor?

PN-Mad Grand Master

PN-Mad

Posted
Posted

No, the filter should be on the pressure side, before your expensive engine.

So you'd plumb in a filter like this:

Pressure out of oil pump--> remote mount oil filter--> oil cooler--> pressure into engine.

rcs_888 Rising Star

rcs_888

Posted
  • Author
Posted

I have a filter between engine and dry sump pump and another filter between the pump and the tank and thats all on the scavenge side then a filter on the pressure side of the pump between pump and engine so 3 filters all up

Dale FZ1 Veteran

Dale FZ1

Posted
Posted

Question is whether the cooler should be 1. on the scavenge side; and 2. in the boot.

Presumably the tank and lines are going to punch out quite a bit of heat. Depending on length of events being run, oil temps may not need to be regulated with a cooler. Any heat exchanger will need to be getting airflow - maybe the oil tank could benefit from a bit of air passing around it to evacuate heat also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I just got to work and skimmed through 61508 and 61511. I was surprised the CSA adopted both, but neither are enforced. To recap what I read, it states that in a perfect world, they should be segregated but they acknowledge that this is not industry standard and clearly mention that they allow mixing of safety and non-safety. 61511 also mentions software segregation like AB does in their safety PLC's.   Now if only I could go back to control, let alone safety over comms. In my current line of work, we're only allowed monitoring and basic control over comms. Everything critical must still be hard wired as much as possible. 
    • TurboTapin
      RB25DET Solid lifter conversion

      By TurboTapin · Posted

      I've unfortunately never been as they're on the complete other side of the continent and another country that isn't currently letting us in as easily as they use to. I even heard their stop signs over there actually say "Stop" instead of "Arret". If I decided to trek the 48h drive, I wouldn't know when or where to stop haha. Whenever I order parts from UP Garage, I order from Japan as it's cheaper. Same with GKTech... oddly enough, it's cheaper shipped from Australia then it is the US.  UP Garage Japan operates their US leg though, unlike Tomei. If Tomei JPN had the power to close down Tomei USA, I'm sure it would be done in a day. They're two completely separate entities. Tomei JPN messed up somewhere originally agreeing to its creation and got sacked big time. 
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      I asked someone about this and he told me about the Audi 1.8T engine. But I think it would be difficult to swap
    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
×
×
  • Create New...