Jump to content
SAU Community

Recommended Posts

Update:

The car is officially registered! Not without some consternation though! Even-though I had the CBP, EPA, NTSB, and MCO which are all the documents required by NV law to title a grey market vehicle, the supervisor at my local DMV shop decided to be a grade-A 'C-U-Next-Tuesday' and told me that she would need to see the entire ownership history of the vehicle in notarized bills of sale in order to allow the vehicle to be registered. Asinine, I know, luckily after countless hours on the phone with the state registration legislators I was able to have them call the branch manager at another DMV and talk them into signing the title paperwork. So long story short, even if you have all the legal documentation, you are still at the mercy of willfully ignorant government employees who will work harder to get out of doing work than putting in the lesser effort to be helpful and reasonable.
Regardless, I have my plates and temp title now, meaning this car will be infinitely easier to sell/register in the future.
I took her into a local drift/JDM shop and had all the work listed in the previous posts performed. Come to find out the car is in near perfect shape and the shop informed me that I did indeed have a HKS GT-SS turbo kit with heat wrapped downpipes. Great little bonus!
I drove her home in the 105 degree Las Vegas heat and to my surprise the A/C was able to keep the interior icy cold (which is much more than I can say about my old 2005 Audi A4). On top of that the coolant and oil temps never seemed to climb above normal operating ranges which surprised the hell out of me. The engineering and quality of design in this car is unprecedented considering its age.
Finally getting to open her up and hear those turbos sing was a blissful experience as well. The partial throttle release compressor surge sounds like that of a big single 2JZ and the low RPM hissing gives way to a turbo whistle that seems unachievable with small twins only pushing 1 bar. Granted it has been a few years since I've driven a turbo car so I'm probably overly giddy.
Here are some shots of the interior and the plates that I worked so hard to get!
:dblthumb:
18600181608_c678a62292_b.jpg
18600289660_7087422dd9_b.jpg
18601832419_5ba0b623f7_b.jpg
18600205468_b52ff6e5d5_b.jpg
18165379744_a1e92536e6_b.jpg
  • Like 4
Even-though I had the CBP, EPA, NTSB, and MCO which are all the documents required by NV law to title a grey market vehicle, the supervisor at my local DMV shop decided to be a grade-A 'C-U-Next-Tuesday' and told me that she would need to see the entire ownership history of the vehicle in notarized bills of sale in order to allow the vehicle to be registered. Asinine, I know, luckily after countless hours on the phone with the state registration legislators I was able to have them call the branch manager at another DMV and talk them into signing the title paperwork. So long story short, even if you have all the legal documentation, you are still at the mercy of willfully ignorant government employees who will work harder to get out of doing work than putting in the lesser effort to be helpful and reasonable.

That's pretty much on par with what we have to go through here with 'Vic-Roads'!

Awesome pick up on the GT-R! How does it compare with your E92?

Looks like a very clean example congratulations

Thanks!

That's pretty much on par with what we have to go through here with 'Vic-Roads'!

Awesome pick up on the GT-R! How does it compare with your E92?

DMVs, the international standard for frustration.

It's hard to have a fair comparison between a 25 y/o GTR and a modern benchmark. Having been accustomed to instant throttle response with lots of top end power in the M3, the GTR feels sluggish around town, the torque and mid-range power when the turbos spool up is always exciting though and if I had to choose between the two experiences, I'll take the turbo car any day.

Even with the aftermarket suspension the GTR feels a little high and boat-like in the corners, hard to beat a M3 with clubsports...that car felt like it was on rails and the steering feedback and stability of the car is definitely superior.

The GTR's interior is actually pretty adequate now that I've installed a bluetooth headunit which streams my music and provides hands free calling. I ordered the M3 without navigation so the interior features are almost identical besides safety aspects which is astounding if you think about the age difference.

We'll see if I can get the GTR to the same erection inspiring form from an exterior standpoint...still have a lot to do!

Over-all M3 wins, as it should, but The GTR nips at the heels much closer than it should considering a quarter century worth of development disadvantage.

Edited by Curt2000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, has anyone either purchased or built themselves a rotisserie for their car before? I can only just justify the need for one hence why I should just make one but at the same time, if I make one I can kiss another 4 weeks of potentially productive car working time goodbye because I'm building a bloody rotisserie....  I mainly want it for the application of the body deadener.  Cleaning the old stuff off, priming and then colour over the deadener doesn't worry me, it's just the application using the Schutz Gun that I feel would achieve a significantly better finish painting it side on and keeping the Schutz Gun upright.  I don't think they would work well on the side let alone almost upside down for some areas.  If the product I use (Terosun, etc) could work through a HVLP ok then it might be ok to apply without the rotisserie.   I can get one of these style ones for about $1200 which is pretty good value-     I reckon if I made one it would cost around $500 but it's more the time that it would take is more of a killer than the cost.  They look to hold their value pretty well second hand so I could always sell it after using it and realistically only lose $200-$300 at worst.  Or keep it and buy another project when this one finally sees the light of day... Anyone selling one...? Cheers!  
    • While it is a very nice idea to put card style AFMs into the charge pipe (post intercooler, obviously), the position of the AFM and the recirc valve relative to each other starts to become something that you really have to consider. The situation: The stock AFM is located upstream the turbo, and the recirc valve return is located between the AFM and the turbo inlet, aimed at the turbo inlet, so that it flows away from and not through the AFM. Thus, once metered air is not metered again, neither flowing forwards, or backwards, when vented out of the charge pipe. When you put the AFM between the turbo outlet and the TB, there is a volume of pressurised charge pipe upstream of the AFM and there is a volume of pressurised pipe downstream of the AFM. When the recirc valve opens and vents the charge pipe, air is going to flow from both ends of the charge pipe towards the recirc valve. If the recirc valve is in the stock location, then the section between it and the TB doesn't really matter here - you're not going to try to put the AFM in that piece of pipe. But the AFM will likely be somewhere between the intercooler and the recirc valve, So the entire charge pipe volume from that position (upstream of the AFM, back through the intercooler, to the turbo outlet) is going to flow through the AFM, get registered as combustion air, cause the ECU to fuel for it, but get dumped out of the recirc valve and you will end up with a typical BOV related rich spike. So ideally you want to put the AFM as close to the TB as possible (so, just upstream of the crossover pipe, assuming that the stock crossover is still in use, or, just before the TB if an FFP is being used) and locate the recirc valve at the turbo outlet. Recirc valve at the turbo outlet is the new normal for things like EFRs anyway. In the even of a recirc valve opening dumping all the air in the charge pipe, pretty much all of it is going to go backwards, from the TB to the recirc valve near the turbo outlet. But only a small portion of it (that between the TB and the AFM) will pass through the AFM, and it will pass through going backwards. The card style AFMs are somewhat more immune to reading flow that passes through them in reverse than older AFMs are, so you should absolutely minimise the rich pulse behaviour associated with the unavoidable outcome of having both a recirc valve and an AFM in the charge pipe.
    • Yep, in my case as soon as I started hearing weird noises I backed off the tension until it sounded normal again. Delicate balance between enough tension to avoid that cold start slip and too much damaging things.
    • I'm almost at a point where I feel like changing the alternator. Need to check the stuff you mentioned first though.
×
×
  • Create New...