Overboosting Help. R32 Rb20det Rb25 Turbo

[Anthony9five]

Hey guys,

I have a r32 with an rb20det and an rb25 turbo. The turbo blew up and i replaced it with another rb25 turbo. Ever since replacing it the boost pressure wont limit itself. Anything over 3500-4000rpm causes the boost pressure to spike. It got to around 15 psi before i backed off to avoid damaging the turbo or other components. I have a turbosmart boost tee installed which was set to 12psi before swapping turbos and worked perfectly. After this issue i wound it right back to see if that was the issue but im still having the same problem.

Any ideas on what the problem would be?

EDIT: Sorry I just realised I posted in the wrong spot. Not sure how to delete.

Edited July 2, 2015 by Anthony9five

[Ben C34]

Well seeing as the waste gate Controls boost it would be wise to check you plumbed it up correctly.

What else could have changed?

[Anthony9five]

  On 02/07/2015 at 8:13 AM, Ben C34 said:

Well seeing as the waste gate Controls boost it would be wise to check you plumbed it up correctly.

What else could have changed?

Ill triple check that in the morning but im pretty sure its plumbed up correctly.

Thats what has me confused. Ive checked all the basic stuff and no luck. Im just hoping for ideas on things I may have missed.

[zoomzoom]

What happens when the boost controller is removed wastegate is plumbed directly?

[Anthony9five]

  On 02/07/2015 at 9:20 AM, zoomzoom said:

What happens when the boost controller is removed wastegate is plumbed directly?

I haven't tried that yet as I don't have a length of pipe long enough. I'm not gonna rule that out, but the boost controller was working perfectly before the turbo swap. If i cant fix it ill buy some pipe and try that though

[Jordy32]

Are you sure your hoses are going into the correct ports on the solenoid?

Any pics?

[zoomzoom]

The point is the wastegate may not even be opening sufficiently due to a physical obstruction or a problem with the actuator.

[mad082]

Could be a dodgy Watergate or possibly the flap is fouling on the dump pipe

[Anthony9five]

  On 02/07/2015 at 10:18 AM, Jordy32 said:

Are you sure your hoses are going into the correct ports on the solenoid?

Any pics?

Ill grab some pics in the morning.

  On 02/07/2015 at 10:19 AM, zoomzoom said:

The point is the wastegate may not even be opening sufficiently due to a physical obstruction or a problem with the actuator.

  On 02/07/2015 at 11:38 AM, mad082 said:

Could be a dodgy Watergate or possibly the flap is fouling on the dump pipe

How would i diagnose this? And then how would I fix it if it is the issue?

[mad082]

To diagnose the wastegate flap fouling you need to disconnect the wastegate and swing the flap to see if it opens.

[Anthony9five]

  On 02/07/2015 at 10:18 AM, Jordy32 said:

Are you sure your hoses are going into the correct ports on the solenoid?

Any pics?

http://i949.photobucket.com/albums/ad335/anthony9five/2015-07-03%2009.27.23_zpss9z4upqv.jpg

http://i949.photobucket.com/albums/ad335/anthony9five/2015-07-03%2009.27.43_zpskufbszgc.jpg

http://i949.photobucket.com/albums/ad335/anthony9five/2015-07-03%2009.27.53_zps7ntxoacl.jpg

http://i949.photobucket.com/albums/ad335/anthony9five/2015-07-03%2009.28.24_zpsyqvsfmpb.jpg

[scotty nm35]

Is the boost T the right way? They are a one way valve inside.

I can't tell if the boost source for the turbo actuator is coming from the BOV or not, it should come from the piping.

[Anthony9five]

  On 02/07/2015 at 8:50 PM, mad082 said:

To diagnose the wastegate flap fouling you need to disconnect the wastegate and swing the flap to see if it opens.

I did this and the flap moves easily. Not fouling on anything.

  On 03/07/2015 at 2:01 AM, scotty nm35 said:

Is the boost T the right way? They are a one way valve inside.

I can't tell if the boost source for the turbo actuator is coming from the BOV or not, it should come from the piping.

Yeah the boost tee is the right way. There is an arrow on it that has to be pointed towards the wastegate, which it is.

The boost source is coming from the piping not the BOV.

[Trex]

as others have said. connect hose from intercooler pipe to the waste gate, if it hold standard boost then you will need to lower the turbosmart boost t.

[mad082]

As has been said, try running the wastegate straight from the piping.

There is always the chance though that the wastegate itself is damaged. If you have a pump you could attach it to the line to the wastegate and see if it opens when pressure is applied (or if the diaphragm in the wastegate is damaged)

[blind_elk]

The diaphragm in your wastegate actuator might be damaged. If you still have the old turbo, maybe you could swap actuators and see if you still have the same problem.

[Anthony9five]

I ran a pipe directly from the pipe to the wastegate. Still no luck. Gonna try and chase down a new wastegate and see how that goes

[zoomzoom]

As mentioned above, make sure to disconnect the actuator arm from the wastegate flap to ensure the flap itself works

[Anthony9five]

  On 05/07/2015 at 10:11 PM, zoomzoom said:

As mentioned above, make sure to disconnect the actuator arm from the wastegate flap to ensure the flap itself works

Did that also and it moves no problems

[zoomzoom]

Kinugawa makes an actuator where you can replace the springs to suit the boost level you want to run.

I am using one on a hypergear turbo, although I had to make a new bracket in order to mount it to the turbo. Its supposed to fit a stock turbo though.

http://www.ebay.com.au/itm/Kinugawa-Adjustable-Turbo-Wastegate-Actuator-Nissan-Skyline-RB25DET-R33-/291501973534?pt=LH_DefaultDomain_15&hash=item43dedf201e