Jump to content
SAU Community

Recommended Posts

Hi All,

i have a 19incher wheels and running kumho Le sport KU39 245/35/19, i find that every 5k kms i have to realign my tyres as around 5000 kms it start to make that out of alignment noise.

Is this common?

should i increase my profile to 40series next time to lessen the frequency of alignment?

thanks

JT

Link to comment
https://www.sau.com.au/forums/topic/457982-wheelstyre-noise/
Share on other sites

I had no idea you could hear when your tyres were out of alignment.

And sure. Run some 40 series tyres. Because, you know, that would be way closer to rolling diameter of stock wheels. Even the current profile is good and I bet your speedo isn't off or anything.

I'd say you're hearing the noise because it's pretty average rubber you have there. Once I got rid of my Kumho KU31s and replaced them with Michelin Pilot Sport 3 tyres, no more screeching around bends.

ok something to think about next time around..i though the le sports were pretty high end of the kumhos..

ok something to think about next time around..i though the le sports were pretty high end of the kumhos..

In my experience and very humble electrical engineer's opinion (i.e. I have no expertise in the field of tyres), Kumho don't produce anything high end when it comes to road tyres.

The KU36s I had were one of the best tyres I have used for grip and feedback, pitty they are insanely noisy. Not suitable for a daily IMHO, unless you have a car with a lot of sound insulation.

I have had KU19s too, and they were quite poor all round.

Hi Ben,

can you be a bit more specific? do you think its my driving style or the amount of times i hit pott holes? lolz

or could my cheap rims could be causing this? i have kings malice

If the alignment is changing that's the cars fault, not the tyres.

In my experience and very humble electrical engineer's opinion (i.e. I have no expertise in the field of tyres), Kumho don't produce anything high end when it comes to road tyres.

ok apart from michelins and pirelli's do you have other experience with other brands that are a little cheaper than them two? hehe

The KU36s I had were one of the best tyres I have used for grip and feedback, pitty they are insanely noisy. Not suitable for a daily IMHO, unless you have a car with a lot of sound insulation.

I have had KU19s too, and they were quite poor all round.

He has KU39 not KU36. Kumho aren't the 'best', they are a good low-mid-range tyre. They aren't that quite either. My Subaru came with KU22 and they were quite noisy, changed to Momo M3, quieter and grippier, but can go more quiet (will next round of tyres, gonna get Michelin).

OP, you may have some worn bushes?

He has KU39 not KU36. Kumho aren't the 'best', they are a good low-mid-range tyre. They aren't that quite either. My Subaru came with KU22 and they were quite noisy, changed to Momo M3, quieter and grippier, but can go more quiet (will next round of tyres, gonna get Michelin).

OP, you may have some worn bushes?

Ok bought the car with 35k kms. i've done 75k now. tyres and wheels have done 16k kms. so you think time to go take it to pedders?

:) I wouldn't take box trailer to pedders.. But maybe some franchises are better than others..

I have had many good experiences with the local fulcrum suspension outlet, but I am not sure if they are in all locations.

As for the KU36, I know the op had 39s, I was just pointing out they do make a good tyre, if you can ignore the noise. A friend at work uses them on his turbo rx3 track car.. Where noise isn't exactly a problem.

But their 'mid range' tyres are quite ordinary.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...