Jump to content
SAU Community

Recommended Posts

Got some free time again today so I spent a few hours working on the car again

So I pulled out the gearbox and the clutch that was in it was in surprisingly good condition considering it's been in there since I bought it in 2003

F602C262-493D-463B-A9F4-01781C724A96.jpg

Here's the clutch that I removed

F4782AF1-79DF-4663-8056-38FA3824186A.jpg

And the nismo clutch bolted up with the "clutch aligning tool"

CE7617EF-44F9-4CDD-BBD7-2E3A4F06304D.jpg

  • Like 1

With the gearbox I decided to change a couple of thing that needed doing and were easier to do while the box was out

First one being the power harness which also has the gearbox connections on it, it had come undone and looked untidy, so it was replaced

E7288E32-3DB9-40BE-873B-AF3C09FDEB3A.jpg

and also the car had a vibration under hard acceleration and rather then put up with it feeling like a VL commodore I bought a new one and fitted it. Which was even easier then I expected it to be

12A29CF7-031B-431E-925B-A0334813444F.jpg

So today I had some time and I did the last couple of things that needed to be done before dropping it off to get tuned

First was the a set of cam gears

F5D539BC-2B45-4FD1-A5AF-564EAA216623.jpg

And I managed to replace them without needing to take the balancer off which helped saved and hour or 2, but I wish I had of worked it out earlier and I could have saved even more time

1D21CEC5-8878-463E-A349-816070B7A6C1.jpg

then I drilled out a spare factory fuel rail to suit an 11mm injector 34943C53-FDD4-452A-9725-DED3A964B906.jpg

And the last thing was changed the spark plugs and when I inspected the factory coils I could see signs of arcing so I replaced them with a set of split fire coils

35C89724-6B8F-4536-89A3-9177555816ED.jpg

DFBB57BB-4EF0-4AD6-9D3A-D87DC0F38C26.jpg

Ok not really related to the Gtr it self but it's living space, while the Gtr was away I decided to paint the garage floor to make working on the car nicer and easier to clean up afterwards

Before

443B6029-5915-427A-BF9E-3F5270328DA3.jpg

And after, I think it look a lot better and makes the place brighter B423C3FA-5F91-44F4-9C49-5440C6E8F74B.jpg

Also the results are in, will update ASAP

  • Like 1

Technically it took 3 days but there was only about 6 hours in actual working time. It took about 2-3 hours to degrease and clean the concrete and then 24hrs to let it dry, to put a coat on took about an hour or 2 but then it was 16hrs between coats and 2 coats was enough. After that it recommends 4-7 days to cure before putting anything on it

The paint was just white knight branded garage floor paint from bunnings and a roller with a few cheap mats to put it on the floor

Grabbed the car today and the results were a little low compared to what I expected for this round result was 281kw with 1.5bar of boost and at 6,000rpm would choke to the point it no longer reved

1F255AFD-43CD-4F64-8C9E-7EF749723E20.jpg

We believe the exhaust is the culprit, basically after the drama with the engine build, I grabbed a bunch of second hand parts and put them all in there to make the car drivable. Which means the next upgrade will be building a proper exhaust that I know will never become a restriction

On a positive note it has lost very little in the way of response and makes more power down low then previously

  • Like 1

Technically it took 3 days but there was only about 6 hours in actual working time. It took about 2-3 hours to degrease and clean the concrete and then 24hrs to let it dry, to put a coat on took about an hour or 2 but then it was 16hrs between coats and 2 coats was enough. After that it recommends 4-7 days to cure before putting anything on it

The paint was just white knight branded garage floor paint from bunnings and a roller with a few cheap mats to put it on the floor

Did the same. Unfortunately the tyres pull the paint off the floor and it looks shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
    • Nah, the car seems to run exactly as it did prior, in saying this it does "seem" to be better down low, like more eager to rev, but that may be 100% placebo effect from intake noise But, I'm not worried about it at all, in the end it is a fairly low compression NA engine that has a well shrouded intake,  if it is getting hotter IAT I cannot notice anything negative performance wise from the seat of my pants thrashing it about on the street or sitting in traffic, so meh, car now now makes induction noise so I'm happy
    • Do you have an IAT sensor? It's worth checking it to see. You may be suprised how little gap you actually need to flood your engine with hot air. (I tape up my airbox for a reason) :p
×
×
  • Create New...