Jump to content
SAU Community

Recommended Posts

I also decided to get rid of the airflow meters,IMG_4845.thumb.JPG.f7bbe6cb9cbc2261a8255d24b1c5d712.JPGno because I think they're a restriction but just cause I could

IMG_4846.thumb.JPG.1e093777a4a734022cd5785adf6dfdc7.JPGso I got the hks adapters IMG_4847.thumb.JPG.53b42138ac9cf4e6698abee7fa738366.JPGand here they are in the car, I forgot to take a photo out of the car 

  • Like 1

Reason for the front bar coming off was fitting a new intercoolerIMG_4851.thumb.JPG.5e2b87f00f2766f404453245e396917c.JPGIMG_4852.thumb.JPG.1b12420b549c1f4fb39ddcf5e9ba2379.JPGwhich is a plazmaman pro series with the 76mm core because I didn't want to modify the front bar to fit it

IMG_4853.thumb.JPG.0c7ffc752833ea9a584f5276e17d954d.JPGquick photo of new and old next to each other, i didn't realize how much bigger it was till I did this 

  • Like 1

So for what I thought was a bolt in intercooler took a lot longer to actually get on the car, the quality and mounting points were perfect but due to the extra width I had to undo the bumper support and move it out of the way and slide it all in togetherIMG_4855.thumb.JPG.5891ad1100e5196f9901b598eed75053.JPGand how close it is to the front support with it all fitted againIMG_4854.thumb.JPG.45b088bd2527286c408b7a10663adb49.JPG

Speaking of getting the front bar on that was a nightmare, I knew the r32 had less room in the front but I didnt know it was this much less.

Because I wanted to keep the factory mesh in there i had to trial fit the front bar and bend the mesh and try again, this happened about 6 times to finally get it right but was worth the effort 

IMG_4903.thumb.JPG.0b264da1000138f9fdaf3ead0520050f.JPGIt's stock sir I swear ;)

  • Like 2
  • 2 weeks later...

Didn't update this last week cause all I did was the wire the vcam and flex sensor into the ecu, plug the wide band controller into the ecu and ran the wire to the boot to switch the second fuel pump 

But this week I was a little more constructive IMG_4886.thumb.JPG.2c5678b60f910a407f156e7269beae42.JPGfirst took the discs off and sent them out to be machined

IMG_4897.thumb.JPG.611e9461c948db0ada023d1dced7782f.JPGback from machining and got some upgraded pads to fit as wellIMG_4929.thumb.JPG.50f9b0e38ee207f88488e73d79292d6a.JPGand all fitted 

Also grabbed some braided lines and fitted them IMG_4928.thumb.JPG.94b5f5003117e9afba5dd85e1227cf71.JPGdidnt get a photo before I put them on but you can see it there 

IMG_4930.thumb.JPG.fd47afb6e52b84d6f3c9722b3e5fd35f.JPGalso fitted a brand new r33 gtr master cylinder and replaced all the brake fluid,

turns out the plug for the fail light is different between 32 and 33 so will go to Nissan and see if they can supply a plug and pins set

Got a delivery the other day from Japan of corse IMG_4936.thumb.JPG.2d386248eb5641067cf762b2e968a35f.JPGIMG_4937.thumb.JPG.91ef7cc76a3d2dbc04dd8b2ca155f10b.JPGIMG_4938.thumb.JPG.aba4669831d8d3fce4d2dac7c9a9ba47.JPGand he first thing out of the box is an ard 150amp alternator, the original was only charging at 12.3v so with the extra load was only going to get worse 

Didn't get photos of it installed before I refitted everything including the radiator and coolant then I rechecked the running voltage and I won't need to worry about it again IMG_4942.thumb.JPG.7644f2ef39153931576f416bb280f556.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which manifold mate? Meanwhile......Mark is wondering how bonnet vents would look on the NC 🤣
    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
    • I did a skidpan night at SMSP this week, it was much cheaper than $350. But yeah, you need to slap an LSD in that thing.  I put an OS Giken in the 370Z and it's f**king MARVELOUS even compared to Nissan's viscous LSD. So you're saying it's free now that it's a housing estate? 😂
×
×
  • Create New...