Jump to content
SAU Community

Recommended Posts

Anyone in Sydney that wants to do there’s to save buying the socket to do it, I’m happy to lend you mine if you leave a $50 deposit which will be returned to you when you return the socket 

  • Like 1
  • Thanks 1
9 hours ago, r32-25t said:

Keeps the pressure in the pump, easiest way to know if yours is stuffed is while car car is sitting there idling you’ll hear the attessa pump cycle every couple of minutes. 

Pretty certain my attessa pump primes every 10 seconds lol

I'm keen to know how did you find the change in ratio's especially for driving on the street in comparison to the 5spd box?

Does it make more sense re ratio's of 6spd v 5spd? and  the 4.11 rear diff.

Doing the same conversion and getting a tad excited, cant wait so trying to glean what you think.

33 minutes ago, Sinista32 said:

I'm keen to know how did you find the change in ratio's especially for driving on the street in comparison to the 5spd box?

Does it make more sense re ratio's of 6spd v 5spd? and  the 4.11 rear diff.

Doing the same conversion and getting a tad excited, cant wait so trying to glean what you think.

I actually think it’s easier to drive especially taking off, I find 4th at 60km sits just under 3,000rpm which gives it a nice amount of torque when you come to a hill, get to about 70-80 and I put it in 5th and it just cruises along nicely 

It’s great with the 4.11s, honestly if you have any reserves about it, don’t worry about them cause you won’t regret it

  • Thanks 1

Thanks - watched it several times listening to the changes. I absolutely love the sound the RB's make under load and the BOV's.

I'm really chuffed to hear you say it's easier/nicer. I cant wait.

Edited by Sinista32

In that race I was against an r32 Gtr with a big single and more power then me and he finished with his front bar lined up with my rear cause mine gets out of the hole so much better 

  • Like 1
  • Haha 1
  • 4 months later...

Nothing “broke” but the ats twin plate while being a fantastic clutch was not strong enough for the mighty twins and slips when I run anything above my lowest boost setting 

The clutch to replace it will be an os r3c that I picked up a couple of months ago from a member on here with very little use on it 

after ripping the box out I sat the 2 clutches side by side and I realized this wasn’t going to work without some parts sourcing 

 

DDCBA29E-BB63-4997-909C-2295A9FBCE88.thumb.jpeg.b1bf8ecaffde3c4722caecfac7f032b8.jpeg

After installing an r3c recently in my Gtr 

make sure u use the correct length bearing carrier as the clutch is “thinner” and needs a long bearing carrier 

mine was around 27mm long if I recall where as most other clutches require a 14ish mm carrier 

  • Like 1

I did a heap of measuring and had worked out that was what was required and late today I picked this puppy up and it will fix my issue

08E0BC49-2B4B-49D7-B962-01992293A7F6.thumb.jpeg.958f6e4ce49dbb036a5628bae4062132.jpeg

I will be able to fit it all when I get a free second and take it for a drive again 

Honestly I have no idea, Kyle from hi octane had it sitting around because their supplier had sent them the wrong part for another customer and he sold it to me.

i will check it for a part number tomorrow 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah yes, fair enough! I was purely thinking about cleaning the spokes and front of the wheel with the mitt. For the barrel the rag on a stick makes more sense. I've tried cleaning the barrels on mine and gave up in frustration. Between brakes being in the way or spokes being in the way and limited space to constantly move the car front and back it was just too annoying. The barrel being as shiny as the rest of the wheel sounds amazing though. At this point I'm not even sure if they have the same surface finish on mine. But I feel inspired now to find out.
    • I have a wheel cleaner pokie thing which is a glorified microfibre rag on a stick, and there is not sufficient clearance between the caliper and the barrel to clean that section. I just roll the car forward 500mm and have another shot at each wheel.
    • The "rag on a stick" is a easy way to fit in between the wheel spokes into all of the barrel Albeit I do have 10 spokes on the MX5 which limits the access to actually jam my hand in to clean the barrel, but it was also makes much easier to clean the 5 spokes on the Dunnydoore with it as well, as you don't have to worry the  caliper getting in the way if you have at least about 15mm space between the caliper and barrel This of course depends if you actually have the clearance between the barrel and caliper, and the amount of OCD you have to get the barrels as clean and shiny as the face of the wheel The thing is bendy as well so you can actually shape it to conform to the inner lip of the barrel  
    • FWIW, as well as a basic immobiliser/remote unlock (all basic units give you those 2 things), I would also install a 4g tracker in any car I cared about. Just hide it anywhere that won't be found in a rushed look and preferably get something with a built in battery backup so it stays online for a while when the battery is removed or flat While its not a car, when our car trailer was stolen in that den of crime Sydney about a decade ago, the cops were watching from the bloke's neighbour's lawn within about 2 hours until he started swapping the plates and putting up the gumtree ad.   Obviously it is still not undefeatable (eg parking it up for a few days somewhere without sky sight) but it greatly improves your chances of getting it back quickly and with less damage
    • Instead of magic keyphrases I wonder if something can be done with auto complete. Similar to how user names are handled already. When you type '@' and follow with letters, it'll search across all usernames. It might work to have the same for forum topics. Some key to trigger it and then text search across all thread names and it'll insert the name and URL when pressing enter.
×
×
  • Create New...