Jump to content
SAU Community

R32 Gtr Long Term Love, Now Project


Recommended Posts

2 hours ago, PranK said:

Hello. Whats your name?

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

Link to comment
Share on other sites

25 minutes ago, MBS206 said:

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

Just lick it clean.

Link to comment
Share on other sites

1 hour ago, MBS206 said:

Evidence girls always fall for shiney things :P

 

Brett, I do NOT envy you when you're going to have to try and keep that shiney!

What it’s supposed to do is go like polished copper colour once it gets some heat through it 

  • Like 1
Link to comment
Share on other sites

IMG_0400.thumb.jpeg.e227052212ae70dfb32daae536e22789.jpeg

and now they are one, the box is back in as well 

IMG_0412.thumb.jpeg.0e27687c341706be74ced4fa386d36df.jpeg

the new clutch master gives so much more room against the manifold 

  • Like 1
Link to comment
Share on other sites

5 hours ago, MBS206 said:

Hey Brett,

Before you even get this running, I've found you an upgrade I think you need to order...

 

https://www.facebook.com/100064809843530/posts/846738300829824/?mibextid=rS40aB7S9Ucbxw6v

 

And it's made locally to you too!

 

Go on, you know you want one to match the billet block...

Someone already beat them to it and made a billet rb26 head and had it on display at gtr fest 

Link to comment
Share on other sites

IMG_0443.thumb.jpeg.11a20791c74065ac64ed63998eca7251.jpeg

Took a little trip 

IMG_0687.thumb.jpeg.84503d6f9734caa01b6f51de21a3f10d.jpeg

went to nismo hoping the get my fuel tank hoses and unfortunately they told me they didn’t have stock

IMG_1025.thumb.jpeg.10605a4f6b66c841fc3c11c3dbe7c204.jpeg

luckily I was able to go to a Nissan parts store and they were able to order them in for me 

IMG_1116.thumb.jpeg.fd07de853decd1fe058d3aa19bd42f5f.jpegIMG_1117.thumb.jpeg.40f4d1a52e2d0e78391e092c77d51ac1.jpeg
then can home and cleaned the tank with some degreaser and fitted the new hoses before putting it back in the car 

  • Like 4
Link to comment
Share on other sites

  • 2 weeks later...

IMG_1118.thumb.jpeg.2406d1f40410362b3ca02dc622f14da0.jpeg

put the front bar back on so I can measure the new spot for the oil cooler 

IMG_1125.thumb.jpeg.88a3e4b5820be633a2b25f940041990e.jpeg

sitting in its new spot waiting for the hoses to come back from being crimped 

Link to comment
Share on other sites

4 minutes ago, r32-25t said:

IMG_1118.thumb.jpeg.2406d1f40410362b3ca02dc622f14da0.jpeg

put the front bar back on so I can measure the new spot for the oil cooler 

IMG_1125.thumb.jpeg.88a3e4b5820be633a2b25f940041990e.jpeg

sitting in its new spot waiting for the hoses to come back from being crimped 

I like your garage!

  • Like 1
Link to comment
Share on other sites

58 minutes ago, RBW49N said:

But has nice toys

I wish they were all mine, I think every toy in there belongs to someone different 

Link to comment
Share on other sites

Front bar is attached for the good now IMG_1151.thumb.jpeg.89d86ae99a460d79d1b71e9b4bb00d39.jpeg

put the head lights back in 

IMG_1165.thumb.jpeg.c59bbddd301eb0b4ac0b229e7c028487.jpeg

decided a new set of blinkers would make it look fresh 

IMG_1170.thumb.jpeg.56093bf984915b972dbcd4166416a18b.jpeg

fitted them along with a new set of clips for the front grill and now it looks like a car again 

IMG_1173.thumb.jpeg.f40b22bee13e1ba20de08e3804c8830d.jpeg

even fitted the volks back on 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And this is where the leak is happening: https://www.dropbox.com/scl/fi/7h1vlmg2j5aa7rksvsjc9/IMG_9982.jpeg?rlkey=d3bnpau5f615zmxqmca0llvr7&st=kquvdxvs&dl=0   Apologies but it seems adding an image from a link does not work when the images are in Dropbox. 
    • Here are some pics from the auction: https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0   https://www.dropbox.com/scl/fi/gkbfaa7urogzhyzxtdgq4/4cd77e2d-e19f-45fb-80a0-f9a88fd7f51f.jpeg?rlkey=39p7xyvgr33kj0avcjry2v4ap&st=ncxmagj4&dl=0
    • Hi all, From the western suburbs here. Just got my 2000 R34 GTT registered today! Got it imported from Japan through a mate who is doing them and managed to find a decent one. This one has only done 110,000 Km and had no body rust etc. so was very happy. I used to own a 25Gt back in 2015 (ate Ramen noodles for years to save up for it), but unfortunately, it got stolen TEN DAYS after I bought it!! Came back from Uni and the car was missing - cops found it in Springvale a month later with a lot of needles  😒 It was too late by then and I had moved on to a different car (300ZX), and after that one got broken into around 2018, I was in a very bad place and decided I would never buy a car again because it was just pointless!!! ~yeah, I have some very bad mojo~ 🥺 But now, with a stable job and a secure garage, I thought I'd get the R34 4D again but not as a daily! I love the R34s but a GTR is still a bit off my pay grade so settled for the GTT instead.    The first step for me is to get this car serviced and have all fluids, belts and spark plugs changed. I might do the brakes at one point too but atm they are fine, the fluids are what I want changed since this car probably sat in a garage for a long time. I'll then get some coilovers since the suspension needs to be changed anyway (the dust cover kit is disintegrating). I'll also upgrade my car alarm to a Viper system and then look at rims and tyres (I'm a sucker for TE37s - might have enough saved in another 3 years for that).   Today: I was planning to do the oil, coolant, air filter and fuel filter change this week. Started on the oil change today and MY GOD what a pain!! I used to think the 300ZX engine bay was cramped - oh I was so wrong! 😂 I've done the usual services on my cars before so it was not like I was going in blind. I looked up all the forum details about what oils to use, what coolant to use, what points to use to jack the car or place stands etc but I did not expect it to be this hard. Long story short - all I managed to do was the oil and filter change. I think I might end up taking it to a mechanic for a coolant change because my SCA stands and trolley jack just can't get far enough underneath to the cross-member and I don't want to be crushed under my favourite car....yet. Side note: In Dandenong, there used to be a shop that lets you hire their hoists - does anyone know if they have those around? I can't seem to find the Dandenong place anymore. I contacted them off FB almost 6 years ago and I'm not in it now. If anyone know of one, that would save me some time going to a mechanic for the basic services. Oil: Dark and gooey but no metal pieces. Oil Filter: Was a b***h to take off but no red flags Air filter: Yucky! Was black (Smells like fuel which makes me think it may have been running rich? - am I way off?)   Concerns: I have but one concern atm and that is that there was a very small amount of oil leaking where the engine and the transmission connect (Automatic). It may be the rear seal? It's not a massive leak and it does not affect the oil pressures or leak oil all along the driveway. It's been falling into the cover this whole time. I've taken the cover off so I can check the garage floor from time to time.  I also have not seen my engine temperature gauge ever sit at cold and slowly move up to the right spot, but that might be because every time I saw the car today, it was running. I'll check that again tomorrow. ATM it just sits right in the middle. I may just be paranoid but I don't want an overheating engine while my gauges say everything is fine. 🙈 Other than that, I'm very happy with the car! Feels like it's about time I went back to spending my weekends driving or cutting my arm on stupid sh*t in the engine bay.   PS: I will post a pic later on because I underestimated soooo badly today and it was dark by the time I finished! PPS: I broke the two damn plastic pins that hold the intake funnel section to the front bar. This is the piece made to bring cold air to the airbox. The connection to the airbox is fone, but the two clips just broke off! Should I be worried? Anyone else done that? 
    • Put some eBay spec sound deadener under the carpet in the boot of the MX5, 2 mm butyl self adhesive rubber stuff, I actually thought I got 1 square metre of the stuff for $60, turns out it was 4.5 square metres, LOL It actually made quite a big difference to the interior with the roof up, I assume because there is no spare in the boot to dampen the sound it just acts as a big resonance chamber  I'll do the boot in the Commodore later, and there'll even be enough left over after that to gift the rest to one of the guys at work who has rebuilt a old 944 Porka as a weekend cruiser  I also binned the old school goop and inflater thingo for some Michelin puncture repair in a can, I actually got 2 cans because they fit perfectly in the old goop and inflater bag that mounts to the trim in the boot
    • So, are your tyres run flats (will be something like 245/45RF19)? Weird to have goop for run flats, and I don't see how goop works without a jack. I'm still looking into suitable spares that fit the wheel well, but it is only 660mm tall which is about 7% shorter than the tyres on mine
×
×
  • Create New...