Jump to content
SAU Community

Recommended Posts

Just now, r32-25t said:

Hahaha that will never happen, way to many people with way more money then me 

Just add heaps of nitrous. 

Before you do that, make sure your ring gaps are good first. 

13 hours ago, Count Grantleyish said:

Just add heaps of nitrous and a Samsonas

Before you do that, make sure your ring gaps are good first. 

Hypertune catalogue, billet dis dat

On 27/10/2020 at 11:31 AM, Dose Pipe Sutututu said:

Hypertune catalogue, billet dis dat

How can I buy any of these things you keep recommending when you won’t even fit it to your own car

  • Haha 2
1 hour ago, r32-25t said:

How can I buy any of these things you keep recommending when you won’t even fit it to your own car

Well you have a Kebabtech 2500 do you not? :D

 

  • 2 months later...

With gtr fest and 2020 done and dusted now is the time to start removing parts that are being replaced.

first cab of the rank is the frenchies twin in tank kitF38C0213-397D-49E3-8D54-DF86F1175FFA.thumb.jpeg.02b9aeb5aa185cf738cb3b6f0c7d9a55.jpegfirst I fitted a 460 into the original cradle and put it back where it lives in the tank

then I modified the original top hate to take -8 and put some wire through that can hold some current and sealed them with some fuel resistant epoxy 5E28E925-ACEA-4FCF-B979-EDA896CBAB24.thumb.jpeg.9ccc3c57ef8e4b64bf4edf6ebcbc26f0.jpeg

  • Like 1

Hi mate. Replace that shit ASAP. Please tell me you never used the factory return line, as it reduces down to about 4mm in the cradle, not the best to be honest. That is way too close for terminal separation when pumps fail. Could've been done much better in the wiring, just glad it didn't fail on you.

Aren't you going a surge tank ? Why the FPG twin in tank setup, when the single FPG top hat will be sufficient when running external pumps from a surge tank ?

  • Like 1
On 10/01/2021 at 10:44 PM, BK said:

Hi mate. Replace that shit ASAP. Please tell me you never used the factory return line, as it reduces down to about 4mm in the cradle, not the best to be honest. That is way too close for terminal separation when pumps fail. Could've been done much better in the wiring, just glad it didn't fail on you.

Aren't you going a surge tank ? Why the FPG twin in tank setup, when the single FPG top hat will be sufficient when running external pumps from a surge tank ?

Sorry only just saw this, I had the frenchys in tank twin set up with -8 feed and return lines and just removed it to fit a single pump back in. 

ive modified the factory hat to take -8 feed and return hoses to a surge tank that I’m waiting to arrive and that’ll have twin pumps in it.

I wanted the factory hat back in for the fuel light to work again and the gauge to read like factory again.
 

The return port doesn’t connect to anything inside the tank it’s just open and pours straight into the tank 

Running wires through the lid like that is a bad idea. They aren't properly isolated from the fuel, and fuel can get up and out of the tank through the wire. It's like you have glued a straw in (the straw has a wire in it so not as bad)

 

You wil notice your tank won't pressurise, meaning there is a leak.

Also - what fuel resistant epoxy are you using? Epoxies are generally not fuel resistant long term, you need a specialist epoxy like a phenol novolac for that. They also don't bond well to that sort of plastic, so you're going to have it shrink and pull away from the plastic fuel lid.

2 hours ago, r32-25t said:

Sorry only just saw this, I had the frenchys in tank twin set up with -8 feed and return lines and just removed it to fit a single pump back in. 

ive modified the factory hat to take -8 feed and return hoses to a surge tank that I’m waiting to arrive and that’ll have twin pumps in it.

I wanted the factory hat back in for the fuel light to work again and the gauge to read like factory again.
 

The return port doesn’t connect to anything inside the tank it’s just open and pours straight into the tank 

We have a modified factory top hat too in the white 32 with 3 x 6mm bulkhead fuel pump electrical terminals, an8 feed and return bulkhead fittings, factory sender, factory fuel light sensor. It's tight. It had a twin Walbro 460 setup in the factory pump cradle and revised it to go back to a single Walbro 525 in factory cradle. We feed the return in the tank back into the factory pump cradle with a 3/8" submersible gates hose.

I saw you were looking for a factory pump sock - an aftermarket version which is identical is available from Taarks/EFI solutions.

What lift pump and twin feed pumps are you going to use ?

Regarding the FPG kit - shouldn't the fuel gauge read like factory as it is a 0 - 90 ohm sender just like the factory unit is ? I want to go to an Frenchy's top hat in my blue 32 and know the fuel light sensor you can raid off your factory setup, and integrate that into the new top hat easily. Just need to add one more bulkhead terminal.

Did you say you wanted to give me your FPG top hat ? 👍

man ben i seriously value your threads and information. I read lots when i can and you have answered endless questions for me. guys like us over here in canada would be stuck without great mates like yourself when it comes down to the nitty griddy stuff! cheers hope all is well mate with the cars, just got all my parts so will be throwing that motor together soon.

6 hours ago, BK said:

We have a modified factory top hat too in the white 32 with 3 x 6mm bulkhead fuel pump electrical terminals, an8 feed and return bulkhead fittings, factory sender, factory fuel light sensor. It's tight. It had a twin Walbro 460 setup in the factory pump cradle and revised it to go back to a single Walbro 525 in factory cradle. We feed the return in the tank back into the factory pump cradle with a 3/8" submersible gates hose.

I saw you were looking for a factory pump sock - an aftermarket version which is identical is available from Taarks/EFI solutions.

What lift pump and twin feed pumps are you going to use ?

Regarding the FPG kit - shouldn't the fuel gauge read like factory as it is a 0 - 90 ohm sender just like the factory unit is ? I want to go to an Frenchy's top hat in my blue 32 and know the fuel light sensor you can raid off your factory setup, and integrate that into the new top hat easily. Just need to add one more bulkhead terminal.

Did you say you wanted to give me your FPG top hat ? 👍

I ended up getting my hands on a factory fuel sock, the feed pump is a walbro 460 it was one of the ones from the frenchys kit. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all, not sure how active SAU is anymore but will ask away anyways. Just wanted to get some experience on the 2008 model GTR CBA model.  I've hit that age in my life (43) where I'm like fk it time to get my dream (midlife crisis) car. Looking at importing one in and seeing if these can be reliable if the main flaws are fixed up. Plan is to keep money aside to do the following straight off the bat to future proof it: * install a stage 1 rebuilt trans with all new bits and pieces.  * install a new Bellhousing from the later model GTRs. Or potentially an upgraded stronger version like MAD or ATR. Besides the above two things and typical maintenance items anything else you'd recommend doing.   Been speaking to a few people and the engine on these are very reliable apparently. But keen on the view of the community here. Hoping to find a nice grade 4.5 with low mileage in Grey. I'd go black but swirls too easy. Look forward to your responses and feedback. Cheers    
    • Do Alan and Keith work on Skylines now? I remember buying stuff from them when I owned my Ralliart Lancer a few moons ago. Definitely genuine guys and be excellent if they dealt with the skyline platform as well.
    • Hey all, I'm Gaston from Sydney's West.  I was a member on here when I was a younger lad and owned a mint R33 GTS-T. Ended up selling it and getting married having kids (yadda yadda) we all know how the story goes. Now I'm back with the intention to get my midlife crisis (dream) car ... a R35 GTR.  You'll see me about asking questions and searching the forums. Good to be back and can't wait to get back an Import again.
    • I have to put something here in order to post the photos. From what I could gather there's more enthusiasm for modified cars now than there has been for years. There were probably more younger people there than older (me included lol) which was a good sign.  It did seem like the record least amount of representation of the 90's era hero cars on display though. Like maybe one or two examples of S-chassis Nissans, and maybe 3 or 4 R-chassis. By comparison there were a lot of Civics from that era but in all there were about 10 - 12 EG/EK Civic Type R.  Euro exotics are always there in large numbers, led by Liberty Walk...... say what you will about kids using markers to scribble on a Ferrari F40, it did seem like a stunt to infuriate Ferrari enthusiasts, or Ferrari itself. I wonder if there's something more to it. Either way LBWK have done some heinous things to a Lamborghini Miura this time. They should stop now.
    • Engines and drivelines are not war stoppers for me mate, busted arse bodies and un-obtainium parts and panels are though Both cheap Brumbies I looked at had trashed tubs and a fair bit of rust
×
×
  • Create New...