Jump to content
SAU Community

Recommended Posts

:D erin puts down the foot..crushes krawlers plans :D all in the space of one thread

Convert the mezzanine floor into a living area and have a whole shed to do stupid things in. I've got visions of F&F moments... Cops are after a pack of hoons, everyone comes racing in, I drop the roller door, cops go by, roller door goes up and hoons go off the opposite direction. Yayayay. Anyway, I thought it'd be cool.

been done.. been there, partied there, done donuts out the back, cops come, we then disappeared down to the pub instead.. actually my mate lived that down in cobram in VIC.. it sounded cool and he had hotrods and crap in there and it was good to stand around burning stuff in the 44 gallon, but it was actually shithouse :)

man, i'm old :) live with free "I remember the time when..." guy!

Yeah if you can wait around a bit, might be an idea to get ytou to stop in on your way home one night after work and we could disscuss this furthur Gordo?

Also Smooth, got any connections which could hook us up with a rental SAU play pad?

Hey Gordo, just sopke with other flatmate, he would not have a problem moving in where you currently are, doing a swap, only thing is you'll have to fight Benji over his room! :) My bet is on Gordo! Well then at least you are half way there and then we can seriously look at some places, anyway pop round after work tody and we'll chat, eh?

What time do you pass by the Yatala BP? If you stop there I can meet you on my way home, as I pass by it, and you can follow me back to the "Unit of SAU" for furthur disscussions.

OK People so far the list of people is:

Pred - Gordo

Ska - Cyrus

Chaos - Ben

All we need is one more for this gem:

4663981mm1090192291.jpg

So cmon! It would be like a permanent dodgy mech day!

I would be providing unlimited ADSL too, HOW GOOD IS THAT!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I personally would run 2x from the cam covers into the catch can, 1x sump vent to catch can (would mount this at a low point of the catch can, so it can also act as a drain). I would see if you can run a -12AN down there to improve venting and also draining. The head drain thing, just drain that back to the sump on the other side. Catch can to be vented, unless you plumb or back to the intake.
    • Yeah the head "drain" is rather a sump/crank case vent. My catch can stopped filling up after venting the sump to the catch can. I have 4x fittings in mine, which is about 5Ls. 2x cam, 1x sump vent/catch can drain, 1x fitting back to the intake and a massive breather which can be blocked so it's a fully sealed system.
    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
×
×
  • Create New...