fmlycar Posted August 5, 2015 Author Share Posted August 5, 2015 Tried a known working z32 afm. No change Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7581800 Share on other sites More sharing options...
Ben C34 Posted August 5, 2015 Share Posted August 5, 2015 Check fuel pressure. So you pressure tested for boost leaks? Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7581820 Share on other sites More sharing options...
Dose Pipe Sutututu Posted August 5, 2015 Share Posted August 5, 2015 Jam a wideband on the exhaust Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7581889 Share on other sites More sharing options...
fmlycar Posted August 6, 2015 Author Share Posted August 6, 2015 Think I may have found my gremlin. Was testing fuel pressure again and had 50psi at idle, pulled vac line for reg and fuel pressure didn't change. Just ordered a nismo reg and will fit that when it gets here. This would explain why it's been so rich and fouling plugs. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7582162 Share on other sites More sharing options...
lcxu105 Posted August 10, 2015 Share Posted August 10, 2015 I currently have the same problem with mine. Was fine on dyno this morning then on the way home developed a miss fire at 4500rpm. Gappef plugs down from .7 to .5 only lowered the miss in the rpm down to 3500. Made it worse. Going to change the plugs tomorrow. And set to .55mm. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584498 Share on other sites More sharing options...
fmlycar Posted August 10, 2015 Author Share Posted August 10, 2015 I still haven't gotten to the bottom of mine. Still awaiting parts. Mine feels fuel related as I have surging at cruise speeds with constant light load Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584517 Share on other sites More sharing options...
lcxu105 Posted August 10, 2015 Share Posted August 10, 2015 Had problems with fuel as well. Couldn't run more than 18psi boost. Couldn't get enough fuel out of the walbro 460lt pump. Suppect it is sucking down on the bottom of the tank. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584544 Share on other sites More sharing options...
fmlycar Posted August 10, 2015 Author Share Posted August 10, 2015 This was this afternoon driving home from work Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584566 Share on other sites More sharing options...
fmlycar Posted August 10, 2015 Author Share Posted August 10, 2015 First 3 plugs are all sooty and black. Fuel pressure seems pretty high both with vac line on and off. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584614 Share on other sites More sharing options...
lcxu105 Posted August 10, 2015 Share Posted August 10, 2015 Mine where all burning good. Tuner said hose must of fell off somewhere. Boost leak. Couldn't find any off so new set of plugs first the change fuel filter and check out the height of fuel pump in tank. After that. I'm at a loss so it will be going back to tuner if I don't find the problem Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584692 Share on other sites More sharing options...
lcxu105 Posted August 10, 2015 Share Posted August 10, 2015 Mine where all burning good. Tuner said hose must of fell off somewhere. Boost leak. Couldn't find any off so new set of plugs first the change fuel filter and check out the height of fuel pump in tank. After that. I'm at a loss so it will be going back to tuner if I don't find the problem Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584729 Share on other sites More sharing options...
fmlycar Posted August 10, 2015 Author Share Posted August 10, 2015 Well I think nearly 50psi at idle is a wee bit too much and not helping my cause. Once the new fuel reg gets here, I'll set it at 42psi no vac and see if that helps. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584758 Share on other sites More sharing options...
XRATED Posted August 10, 2015 Share Posted August 10, 2015 What was rail pressure when it was tuned? Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584795 Share on other sites More sharing options...
fmlycar Posted August 10, 2015 Author Share Posted August 10, 2015 Was tuned at standard rail pressure. It's going for a retune end of month so if it needs to be bumped up or pulled back they can do it then. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7584802 Share on other sites More sharing options...
lcxu105 Posted August 11, 2015 Share Posted August 11, 2015 Found my problem this arvo. Changed plugs didn't do anything. Pulled fuel filter out. (Aeroflow reusable one ) stainless steel screen was blocked. Changed it from 80m to 30 m took for a run and was fine. Will pull the tank on the weekend and clean it out. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7585304 Share on other sites More sharing options...
fmlycar Posted August 11, 2015 Author Share Posted August 11, 2015 (edited) Glad you found yours. I'm still waiting on fuel reg and fuel pump so I can set base pressure and make sure it's not running out up top. Edited August 11, 2015 by fmlycar Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7585306 Share on other sites More sharing options...
fmlycar Posted August 11, 2015 Author Share Posted August 11, 2015 (edited) Pretty sure duty cycle shouldn't be that high on 550cc squirters and 18psi on a Td06 only making 240rwkw. Looks like the new fuel pump is required anyway Edited August 11, 2015 by fmlycar Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7585364 Share on other sites More sharing options...
lcxu105 Posted August 11, 2015 Share Posted August 11, 2015 Will be up there. 550cc injectors in mine where just about maxed out. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7585480 Share on other sites More sharing options...
fmlycar Posted August 11, 2015 Author Share Posted August 11, 2015 (edited) Nah that's way too high. 550cc should be good for over 300kw on pump. Before I was having issues I would see values around 67% even with spikes of 2-3 psi in boost. Will fit new bosch pump when it arrives and report back. Edited August 11, 2015 by fmlycar Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7585499 Share on other sites More sharing options...
Ben C34 Posted August 11, 2015 Share Posted August 11, 2015 Boost leak. Link to comment https://www.sau.com.au/forums/topic/458035-another-rb25-misfire-topic/page/5/#findComment-7585539 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now