Jump to content
SAU Community

Nismo L M G T Sale In N S W

GTR-N1
 Share

Recommended Posts

GTR-N1 Grand Master

GTR-N1

Posted
Posted

1) LMGT 1

Spec:- 18x9.5" +14 Four Wheels

Colour:- White

Cost:- $1,950

Tyres:- None

Comments:- Good condition, even after two rims have been previously repaired on the inside edge by Wheel Repair Centre (formerly Simmons). Showing their age a little bit. New stickers are available should you wish to refurbish these. All caps are present.

LMGT1-3_zpsvvn2zpag.jpg

LMGT1-5_zpsrevwxuj7.jpg

LMGT1-7_zpslcmuh9ox.jpg

LMGT1-9_zpsfjllvzvj.jpg

2) LMGT 4

Spec:- 18x10.5" +15 Four Wheels

Colour:- Nismo Black

Cost:- $3,900

Tyres:- Kumho 36 40% even wear

Comments:- Very Good Condition, whilst one rim was repaired by MagMan last year on the inside edge. Powdercoat was matched to Nismo Black and contains a resin to make the coat more slippery (to dust).

After a certain amount of wear, KU36 tyres develop quite a bit of road noise. All caps are present.

Terry-26-1.jpg

2012GTR005.jpg

2012GTR006.jpg

3) LMGT 4 GT500 Ver05

Spec:- 18x9.5" +12 Four Wheels

Colour:- Nismo Black

Cost:- $3,200

Tyres:- Bridgestone Potenza RE01 65% even wear

Comments:- Perfect Condition. Powdercoat was matched to Nismo Black with a resin in the coat to make the wheel more slippery (to dust). The hexagonal cap is aftermarket, made by SAU Member PLYNX. The thin collars (held by two screws) that cover the stud holes are not present and are as scarce as hens' teeth.

Terry-291.jpg

Terry-292.jpg

Terry-293.jpg

* PM me or

** Text me on 04onesix214699

Link to comment
https://www.sau.com.au/forums/topic/458097-nismo-l-m-g-t-sale-in-n-s-w/
Share on other sites
deongster Mentor

deongster

Posted
Posted

I have a set of LMGT4 18x9.5 +12 if anyone is interested. Same price as above - with federal RSR about 70% left on them. Or swap for TE37RT - the red ones - with rubber.

Thanks Terry. And yes guys I asked for permission first before posting. [emoji4]

GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

Any R32 that you're considering putting R34 GTR OEM wheels on, the White LMGT1 above will fill out your guards even more.

The R34 GTR OEM rim specs are 18x9" +30

The LMGT1 rim specs as stated in OP are 18x9.5" +14.

And the price of these LMGT1 rims are about the same.

I will accept Lay-by. So that'll match up with your tax return I think. Hope this helps!

GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

UPDATE

2) LMGT4 18x10.5" +15

and KU36 Tyres

reserved for *h*o**

(2nd dibs **n)

3) LMGT4 18x9.5" +12

and RE01 Tyres

reserved for R*** B***n

(2nd dibs **n**)

(3rd dibs **n)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Zabuza
      Need AC Compressor for R32

      By Zabuza · Posted

      Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • sausagepianist
      V36 2008 Coupe Wiring Differences with Android Screen

      By sausagepianist · Posted

      Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was ￡307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • sonicii
      V35 Overheat + Coolant Boil & Overflow + Engine not Starting

      By sonicii · Posted

      As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...