Jump to content
SAU Community

Recommended Posts

THE ULTIMATE STREET GTR 10sec street car

FEATURE CAR IN HPI VOL46 CURRENT ISSUE IN STANDS NOW

NISMO LM WIDEBODY only 1 in Australia

built, tuned and maintained by one of the best tuners in the racing circuit here and overseas.

only done 14500 km after build.

Twin KKK Top Mount Turbos rated at 900hp

Blitz Manifold

Twin External Wastegates

88mm JE Racing Foged Pistons

Hks 280 Cam Shafts IN/OUT

JUN Cam Gears

Hks Drag Pro Valve Springs

Modified Headwork

Balanced Crank

Short Pin Rods

ARP Rod Bolts

Nismo Oil Pump

Nismo Water Pump

Nismo bearings

Custom Catch Can, Braided Hoses

Hks oill Cooler with remote filter

Os Giken Twin Palte Clutch

custom 4" stainless exhaust

Twin 3" Stainless Steel Exhaust system( as a spare)

55mm Tial Racing Blow Off Valve

120mm Blitz Intercoolerand cutom piping

Custom stainless induction, k&n filters

Motec Ecu

Twin Bocsh Racing Fuel Pumps

Custom Surge Tank, All Braided Lines

Custom Fuel Rail

900cc Injectors

Sard fully adjustable Fuel Regulator

ngk Iridium8 racing spark plugs

Motul 300v

Hks EVC5

Tein Coilovers

Nismo White Dash And Cluster

Recaro Drivers Seat

18x11 3 Piece Equipe Racing Wheels Allround 275x35x18 Falkens

Endless pads

Air Conditioning ( re mapped )

Full Alarm System

Sony Cd with remote.

power

500@4wheels@1bar on optimax no aditives EVERY DAY DRIVING

561hp@4wheels@1.45bar on optimax no aditives EVERY DAY DRIVING

650hp@4wheels on race fuel. IF YOU REALLY WANT IT.

this is a seriously IMPRESSIVE and FAST CAR..

will run 10sec

ran 11.7@122mph on just 14psi soft launch. optimax in full street trim

only ever raced once. used everyday.

replacement cost over $100000

FOR SALE $75000

will consider trade.

will consider selling all performance mods as a full package inc motec ecu,clutch,intercooler in the lot, just put in your gtr and you will have a bargain.

$30000.00 plus your standard rb26 engine.

will also consider selling widebody without the mods and engine setup for $45000.00

so if you want a well built no expense spared supercar.

Genuine Ineterests Only Please. sms 0404134400

Link to comment
https://www.sau.com.au/forums/topic/45815-widebody-gtr33-800hp/
Share on other sites

You are going to get 1,000 posts asking for pics, just post them to save yourself the pain.

p.s. How much fuel pressure does it take to get 720cc injectors to pump out 800hp?

p.p.s BUMP :cheers:

You are going to get 1,000 posts asking for pics, just post them to save yourself the pain.

p.s. How much fuel pressure does it take to get 720cc injectors to pump out 800hp?

p.p.s BUMP :)

ALL PICTURES ARE IN HPI VOL 46 IN NEWS AGENTS NOW.

THANKS.

Hi there,

Are the cams 280 duration on both intake and exhaust and also what lift are they.

Can it make more HP on racefuel or you havent takin it that far yet.

280 cams on both sides.

not run on race fuel. this set up will make 600+ hp @4wheels easily. if you see the pictures and the article in hpi vol46 you will see what i mean.

280 cams on both sides.  

not run on race fuel. this set up will make 600+ hp @4wheels easily. if you see the pictures and the  article in hpi vol46 you will see what i mean.

ran the car on 1/4 for 1rst time, low boost run 14 psi @11.7@122mph

full tank fuel, street tyres, aircon.

look forward to a 10 sec 1/4 next test an tune.

lol sorry i forgot all about this topic.I have a few more questions for you.

1)Hows this thing on the street with those size cams are the ok or are they bordering ridiculous???

2)Does it run hot with cams that size as ive been told something with that size duration cams always run really hot.

4)What size lift are the cams?? are they the 10.? lift ones or the 11.? lift ones.

5)Whats the usuable rev range on these cams for both street and track.

6)Whats the compression ratio of the engine I can gather your running some high comp ratio...say 9-9.5 to 1.

7)What exact Motec does it have and do you have any under bonnet pics.

Thanks.

FOR SALE FEATURE CAR IN HPI VOL46 CURRENT ISSUE IN STANDS NOW

Car Specifications JGTC STYLE WIDEBODY WHITE WITH RED PEARL

800 horsepower GTR

450hp@4wheels@1bar optimax

520hp@4wheels@1.5bar optimax

The car is tuned to 2bar of boost.

Redline 9000RPM

Twinn KKK K26 Blitz Top Mount Turbos

Blitz Manifold

Twinn External Wastegates

88mm JE Racing Foged Pistons

Hks 280 Cam Shafts

Hks Cam Gears

Hks Drag Pro Valve Springs

Modified Headwork

Balanced Crank

Short Pin Rods

ARP Rod Bolts

Nismo Oil Pump

Nismo Water Pump

Custom Catch Can, Braided Hose

Hks oill Cooler with remote filter

Os Giken Twin Palte Clutch

Twin 3" Stainless Steel Exhaust

55mm Tial Racing Blow Off Valve

120mm Blitz Intercooler

All custom piping

Custom stainless induction, k&n filters

Motec Ecu

Twin Bocsh Racing Fuel Pumps

Custom Surge Tank, All Braided Lines

Custom Fuel Rail

720cc Injectors

Sard Fuel Regulator

Hks EVCiv

Tein Coilovers

Nismo White Dash And Cluster

Recaro Drivers Seat

18x11 3 Piece Equipe Racing Wheels Allround 275x35x18 Falkens

Endless pads

Air Conditioning  

Full Alarm Sysytem

Sony Cd  

OFEERS OVER $85000

Family Situation Forces Sale

Genuine Ineterests Only Please. ph 0404134400

these turbos were on my built 2.7 previously and made 652hp@the wheels at 1.5 bar, with 103 octane fuel.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah I'm keeping an eye on it and might take it out as a once off if this doesn't fully charge. I did some research that said it's normal in equalisation charging. Voltage I thought was 20+ (faulty battery in multimeter) but now its on 15.9v, the max it should go to is 16.2v as per the manual. I'll provide an update once hopefully it's actually fully charged and in float mode. Waiting for it to go to 16.2v and not higher and see what happens. What I suspect has happened is that even though it's not an old battery, I did leave the car turned off for almost 4 weeks at one point then left it off for another 2 weeks which might have erroded the battery and is taking a long time to do this equlisation charge.
    • I wouldn't be using the seats a lot since it's on Historic rego and will not be driven a lot, however I also don't want to fork out 3k for something that won't last. Havent looked at BRZ seats, aiming for something of the same era I did speak to him on the phone once, and I do see your point haha. How many kms do you think you drove before they started wearing out? Just had a look at yours, certainly looking for a reclinable version. The Brides don't look too bad! I would still like to sit in one just to make sure it's what I'm after.    Thanks for the replies fellas. 
    • I bought my Bride reps from Crank Motorsport. He is, um, a trifle disorganised. I would have to look back at the e-mails to make sure I got it right, but I think he sent me normal fabric ones when I ordered the "Alcantara" ones. So he had to pay for shipping 3x and I'm sure that f**ked him off big time. And asking technical questions where nuanced English is required is a no go. It's simple English only. And....should I have bought the Alcantara ones? Well, as it turns out, they are great, feel great, etc, but the fabris wore through on the point of the waist bolster in <2 years. Must have caught a rip from a rivet on jeans or shorts, or something like that. So now I have to patch it somehow. A bit shit. My fault, ultimately, because it is Chinesium Faux Alcantara, not the real thing, and it turns ot that it has the tear resistance of a soggy tissue. But the seats and the reails are great. I probably should have gotten the R34 style ones, and now that they price is up in that ridiculous sort of number, I could have sold them for a profit!
    • Another recco is to just let it rest for a while and go back and reconnect later.
    • keep an extinguisher nearby? or even better, take it out of the car to charge?
×
×
  • Create New...