Jump to content
SAU Community

Recommended Posts

ETs have always indicated setup, MPH have always indicated power

Nothing has changed.

Dynos lie, MPH don't.

Power and setup will make a difference in MPH

For example if we have 2 cars with 450awkw, one with -5's and a dog box and one with a Gt42 and standard gearbox with a clutch that won't shift at high rpm the car with the -5 will trap higher obviously.

The guys with the 500kw dyno graphs trapping 125mph very well could have that power but might not have the tyres, clutch, gearbox, powerband, driver to use it properly.

^---- that is the truest of all.

Other numbers, lap times. It's all just numbers. It's all just some kind of respresentation of some aspect of the car. You can think of the drag strip as either an "advanced dyno" or a reason to live.

  • Like 1

Agree to disagree.

Statistically speaking a 300kw a gtr should trap at 120mph approximately. So when talking of any other cars with similar weights they are always in the ball park with a half decent setup for traction and drive line.

The big variable is usually ET, but mph is always there or thereabouts.

Power and setup will make a difference in MPH

For example if we have 2 cars with 450awkw, one with -5's and a dog box and one with a Gt42 and standard gearbox with a clutch that won't shift at high rpm the car with the -5 will trap higher obviously.

The guys with the 500kw dyno graphs trapping 125mph very well could have that power but might not have the tyres, clutch, gearbox, powerband, driver to use it properly.

So the reason there MPH is down to mechanical issues there, easily explained and logical. :thumbsup:

So the reason there MPH is down to mechanical issues there, easily explained and logical. :thumbsup:

I went from a Ppg dog box 400rwkw setup that trapped 131 to a standard box slowly shifting with a easy launch down to 126mph exact same power.

Just saying there's a bit more to it then rolling out with a certain hp and running X mph.

ETs have always indicated setup, MPH have always indicated power

Nothing has changed.

Dynos lie, MPH don't.

No 100% correct.

same car 2 different tyres *10-15mph difference... same day same driver. Changing from 215 nankangs to 255 et streets didnt magically make any more power.

Gone are the average days of a bit of spin then grip enough to cross the line.... half the "average" turbo cars nowadays will powerskid 400m no sweat... and cross the line way off the optimum MPH.

  • Like 2

Agree to disagree.

Statistically speaking a 300kw a gtr should trap at 120mph approximately. So when talking of any other cars with similar weights they are always in the ball park with a half decent setup for traction and drive line.

The big variable is usually ET, but mph is always there or thereabouts.

No 100% correct.

same car 2 different tyres *10-15mph difference... same day same driver. Changing from 215 nankangs to 255 et streets didnt magically make any more power.

Gone are the average days of a bit of spin then grip enough to cross the line.... half the "average" turbo cars nowadays will powerskid 400m no sweat... and cross the line way off the optimum MPH.

As I said in the post above. A half decent setup for traction and driveline will see mph there or thereabouts. This means a good set of tyres at least obviously.

My point being, if someone quotes a dyno figure, then the next question is what mph did it run. If its lower than the expected range with a fair 1/4 mile run, then the power level needs to be questioned.

Well that's the way I have always confirmed my cars and everyone I know does the same thing.

So in the case above did the final mph support the dyno numbers?

Same goes for running semi's on a roller dyno and strapping the car down hard, no-one will be interested when you run 50kw less than your projected output.

Some cars are setup for drag and some aren't. It's less reliable than the dyno figures you are trying to prove misleading imo.

^ thats a fair call.

BUT what you are missing if you just take off normally at a drag strip your MPH will still be similar at a given weight/power ratio.

Doesn't matter on setup and if you are in a GTR you will have traction unless you are running silly power and really poor rubber.

That is how the online MPH calculators work and they are pretty good.

DISCLAIMER: This doesn't take into account bad driving etc.

Remember doesn't matter if you win by an inch or a mile.

Edited by Stixbnr32
  • Like 1

^ thats a fair call.

BUT what you are missing if you just take off normally at a drag strip your MPH will still be similar at a given weight/power ratio.

Doesn't matter on setup and if you are in a GTR you will have traction unless you are running silly power and really poor rubber.

That is how the online MPH calculators work and they are pretty good.

DISCLAIMER: This doesn't take into account bad driving etc.

Remember doesn't matter if you win by an inch or a mile.

So did you not read Ryan1200's post a few up about exact same power, just different gearbox and 5mph difference??

So it does matter on set up etc and is not just all about what power you run.

Your online calculator can't take differences like a dog vs normal H pattern into account.

More to it than X power runs X mph

Edited by tricstar

With manual gearboxes.... Power under the curve drastically changes mph,not just the peak , with autos because the converter setup properly is spinning the motor in its sweet spot constantly

its easier to use mph vs power.

Its still a good marker regardless...many problems have been found at a dragstrip vs a dyno due to mph being off. Boostleaks are a big one. A car will run hard to 1/2 track and drop

mph big time in the back half.

cheers

darren

Yeah but then we are talking ratios and driver performance (slow gear changes) if you are changing gearboxes.

Lets not get into that - we all know a seq can change quicker than a H pattern and you will most likely end up with higher MPH.

I know I have contradicted myself here a little but lets compare apples with apples.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Evening fam, Pretty much what the title asks, I have looked all over and can’t find a proper answer expect one post from almost a decade ago which is vague. ive seen photos and they look pretty much identical, would an r33 GTR N1 reo work on an r32? reason I ask is they are cheaper to buy… $700 compared to 1k+ for an r32 n1 reo
    • Couldn't help myself, had to start putting it together.... It really is a solid bit of kit.  Probably stronger than i would have made it myself to be fair! 🤣🤣 Sweating like a pig after that.  Bloody hot and muggy day today, time for a swim now!
    • Yeah was thinking that. I've had the car go lower idle possibly around 650rpm every once in a long time after pouring fuel and would sound quite rough like a misfire, almost like it's shit fuel or something but who knows.
    • @Wazmond you are correct, my bad, was not my intent    https://www.facebook.com/share/15ZMn5oXtc/ Updated Event (so its not private and can be shared easier)  Attempting to coordinate a big push of Stagea's to this years GTR Festival. Great event last year and hoping for the same this year.    I've emailed them to ask to set a location aside for the Stageas for the show and shine - they are happy to do so if we can get them numbers, I'm happy to keep track of that. Entering as Nismo category.    I'll be road tripping up from Melbourne, would be cool to convey if people are interested, maybe there is SAU convoys from each capital? If you have ideas about that let me know.    https://gtrfestival.com.au
    • Just buy a bunch of covers off aliexpress, they're like $5 each. Rattle-can them and stick them on as needed/fly off.
×
×
  • Create New...