Jump to content
SAU Community

M35 4wd Diagnostic Mode

carlightsup
 Share

Recommended Posts

carlightsup Community Regular

carlightsup

Posted
Posted

Hi Guys,

I'm trying to find out if there is a way that you can put the NM35 Stagea into a self diagnostic mode (similar to the one for the MIL) but for the 4WD light.

I've had a search and cant seem to find anything, I found one that seems to be for the C34, tried it on mine anyway but it doesn't work.

I have scanned with a Snap-on but came back with nothing.

any help would be really appreciated.

Link to comment
https://www.sau.com.au/forums/topic/458246-m35-4wd-diagnostic-mode/
Share on other sites
Brick Mentor

Brick

Posted
Posted (edited)

You will need a consult 3 to scan it.

Most likely it will be the pressure switch on the atezza pump. $3 part in theory but nissan only sell it as a whole unit that costs over $2000..

Edited by Brick
  • Like 1
Reprieve Community Regular

Reprieve

Posted
Posted (edited)

Here is some stuff that helped me fix my 4wd/pressure switch problems, some of the info is useful, it might help you figure out whats wrong. my code was for pressure switch but it turns out after months of ripping things out it wasn't the pressure switch lol fml.

http://ul.to/dwxo03kg link to a pdf of some rough translations i made with google translate of the atessa system

stagea1

stagea2

stagea3

Edited by Reprieve
Brick Mentor

Brick

Posted
Posted

Here is some stuff that helped me fix my 4wd/pressure switch problems, some of the info is useful, it might help you figure out whats wrong. my code was for pressure switch but it turns out after months of ripping things out it wasn't the pressure switch lol fml.

http://ul.to/dwxo03kg link to a pdf of some rough translations i made with google translate of the atessa system

So what did yours end up being?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      No worries, everything worked out in the end. I just wanted to make the point that it doesn't matter where it comes from (I.E Australia), it can be broken or improperly built. I would still purchase from these companies in the future. B2R - Not certain how that finished, this was on a car I wired a few things and street tuned. I know the owner ended up shipping the motor back to Australia for investigation. Hopefully some of it is covered under warranty.  Turbosmart - I always pressure test everything that goes on my car. It's a habit from my career in oil and gas. I run two 40mm's and both had major leaks from the actuator to exhaust portion through the shaft. I returned both, they shipped me back two and one was leaking and the other had a 38mm top (40mm gate with 38mm actuator cap, no idea how that happens). Eventually after a lot of back and forth I found myself with two non-leaking gates. I believe this happens a lot more then people would like to believe but you would never know if you don't pressure test them prior to installation. Crank Motorsport - Issued a full refund and let me keep the seat rails. I turned them into scrap metal for other projects. GKTech - Shipped me out a replacement and asked that I modify it as per my idea and that they would do the same for a future revision. ATP - Can just needed a large shim to bolt up properly.  Haltech - They started an actual proper Beta channel for firmware's a few months back and stopped using the general public for testing. I'm now much happier.  Speedtek - f**k Speedtek. I would love to watch them burn.     
    • Murray_Calavera
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By Murray_Calavera · Posted

      I've got a Turbosmart wastegate, ATP catch can, many GK Tech parts and Haltech everything. Everything's been perfect, sorry to hear your experience wasn't the same
    • TurboTapin
      HKS stroker kit step 0/1 or HKS GTIII 2530

      By TurboTapin · Posted

      The only high-power RB I've personally seen go pop after running for all of an hour on a dyno was built by B2R, while being remotely tuned by B2R. The only wastegates I've ever had leak like a sieve, return, still leak, return and get shipped back the wrong ones were from Turbosmart. The only final drive that I've ever purchased that were unusable, twice... were from Speedtek. The only seat mounts that I've ever purchased that placed the seats in the door frame were from Crank Motorsport. The only poorly designed parts that I had the manufacturer confirm should have been designed as per what I mentioned were from GKTech. The only ECU I've had firmware updates consistently break things are Haltech. The only catch can I've purchased that didn't fit in its advertised spot was from ATP. So forth and so on... Moral of the story, doesn't matter where it's from. Do your research beforehand and stick with products and companies you've trusted in the past.    @joshuaho96 If you want it done right, do it yourself.
    • GTSBoy
      Rb25det Belts Change

      By GTSBoy · Posted

      Something coarse-ish. 180 is good.
    • PranK
      Quick Lifts? Anybody got one?

      By PranK · Posted

      I was surprised to see all the quick Jack models at the same prices on there. But yeah, grabbing one at 20% off would be great.
×
×
  • Create New...