Jump to content
SAU Community

Electrical Issue R33

GT500_Racer
 Share

Recommended Posts

GT500_Racer Enthusiast

GT500_Racer

Posted
Posted (edited)

Hi guys i got a electrical issue that has me stumped, ive checked all the fuses and relays, ive replaced the alternator as well figuring that it wasnt charging at 14 volts, and battery yet still same problem....

When the car runs its draining the battery to the point where the car dies, the battery sits on 11.4 volts when the car isnt on, but once u start it up the battery is drained,withing 15 mins

ive checked all earthiing and removed my amps and gauges to isolate the issue to only just the oem wiring, yet the problem is persistent :(

any help is appreciated cheers :)

Edited by GT500_Racer
Link to comment
https://www.sau.com.au/forums/topic/458251-electrical-issue-r33/
Share on other sites
boostn0199 Grand Master

boostn0199

Posted
Posted

What voltage is battery when car is on? Does your battery light come on when u turn ign on? The batt light on dash acts as a excite trigger for alternator to start chraging when car switched on so if light isnt on it wont charge

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      2025 Osaka Auto Messe

      By r32-25t · Posted

      I’d love to find some where that can recover the dashes to look brand new and original. Mine has a very slight bubble, nothing compared to some I’ve seen though 
    • Rezz
      2025 Osaka Auto Messe

      By Rezz · Posted

      $170K. I asked one of the guys there as a joke if that price was just for the passenger seat as it was where the price sheet was... he tried really hard to crack a smile 😄 He also mentioned that every single part of the car was inspected and either restored or replaced with a new or as new part, or made from scratch. The interior was incredible, every inch like a new car.
    • Dose Pipe Sutututu
      R32gtr sputtering and stalling

      By Dose Pipe Sutututu · Posted

      Time for a modernisation, throw out the AFM, stock O2s, ECU into the e-waste bin. Rip out the cable throttle, IACV, pedal, etc. into the scrap metal bin. DBW, e-throttle, modern ECU, CANbus wideband, and the thing will drive better than when it left the factory.
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      I agree, don't go trusting those trims. As I said, first step is to put the logger away, and do the basics in diagnosis.   I spend plenty of time with data loggers. I also spend plenty of time teaching "technicians" why they need to stop using their data loggers, and learn real diagnostics.   The amount of data logs I play with would probably blow most people away. I don't just use it to diagnose. I log raw CAN data too, as a nice chunk of my job is reverse engineering what automotive manufacturers are doing.
    • joshuaho96
      R32gtr sputtering and stalling

      By joshuaho96 · Posted

      I'm aware, but unless you're actually seeing the voltage the ECU is seeing and you're able to verify the sensors are actually working I find it hard to just trust STFT/LTFT. I will say, logging the ECU comes naturally to me because it's one of the lowest effort methods of diagnosis and I do similar things in my day job all the time. Staring at 20+ charts looking for something that isn't quite right isn't for everyone. NDS1 allows you to log almost everything so that's normally what I do and then sort out the data later. 
×
×
  • Create New...