Help Learning To Shim Front Gtr T-case

[KiwiRS4T]

Does anyone have the part numbers from nissan for the friction plates and drive disks from nissan.

Tried emailing Greenline?

http://www.greenline.jp/catalogue/bccatlist2.php?make=Nissan&carcode=R33C&intake=FI&currentsubcat=other

or AG-Y

https://translate.google.co.nz/translate?hl=en&sl=ja&u=http://www.ag-y.com/&prev=search

[MJTru]

Where did you get the photo from mate. I can't seem to even find that on Greenline. I did send them an email.

[MJTru]

Ok ive been looking hard i found it on AG-Y. I have looked all over there site and cant seem to find there email. Im going to try and call them tomorrow or later tonight. I hope someone there speaks English.

[MJTru]

Today i launch the car again and paid close attention to the front torque gauge and i noticed that it works at least a bit it goes to like 45% I would launch it and what i could say is that its not like the r33 gtr i have. If i power shift second gear i can feel the rear wheels spinning like crazy. But the car pulls. On a very very hard launch from a stand still it rips the rear wheels and the front doesn't spin up. The only comparison i have is my r33 gtr. The same launch would spin up the front wheels on my r33 gtr. I have a whole r32 gtr sitting here so after i crashed this gts4 im going to change the pump over the rear diff and change the g sensor. Im going to launch the car and look for any difference.

how or what should i look for in a r32 launch. Should it spin up the front wheels like my r33. Both cars are at the same power level. Give or take 20hp or so.

Edited August 4, 2015 by MJTru

[niZmO_Man]

R33 ATTESA is faster to react than R32.

[MJTru]

Ok so AG-Y just provides a service and i would have to send the transfercase there for rebuild and RHD japan wants part numbers

Edited August 4, 2015 by MJTru