Jump to content
SAU Community

Recommended Posts

INLET MANIFOLD TO SUIT R34 GT-t RB25 NEO

turbo side can suit earlier models.


Selling my turbo kit no longer needed as i'm going a different engine and this setup is not

suitable for what im chasing. only reason for removal is because my engine is now low on compression (was stock)


Only about 3000kms of work and has performed faultlessly. like new


Made 317rwkw at 20 psi on E85. only ran that on the dyno. street use was 17psi however turbo can run into the 25's


Parts include the following


Hypergear ATR43ss internal gate (500hp unit)

Earls turbo lines and fittings.

Stock exhaust manifold

tube and fin Intercooler 600x300x76 3inch inlet and outlets.

All clamps and silicon couplings

2 x 3 inch dump pipes. 1 with cat is stainless + high flow cat and other without a cat is iron.

PLAZMAMAN inlet manifold also includes their billet 80 mm throttle body.

catch can setup includes all fittings and hoses

Custom made aluminum intercooler pipes (TIG welded)

3 inch intake pipe

Brand NEW k&n pod filter

turbo beanie


Any questions don't hesitate to ask

still on car, only remove when i get a deposit




$2800


Thanks for looking

post-84945-0-22619900-1437275159_thumb.jpg

post-84945-0-70318800-1437275179_thumb.jpg

post-84945-0-44245100-1437275196_thumb.jpg

post-84945-0-08548600-1437275226_thumb.jpg

post-84945-0-86390200-1437275248_thumb.jpg

post-84945-0-76629700-1437275304_thumb.jpg

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/458328-turbo-kit-r34-neo/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...