Jump to content
SAU Community

Turbo Kit R34 Neo


Recommended Posts

INLET MANIFOLD TO SUIT R34 GT-t RB25 NEO

turbo side can suit earlier models.


Selling my turbo kit no longer needed as i'm going a different engine and this setup is not

suitable for what im chasing. only reason for removal is because my engine is now low on compression (was stock)


Only about 3000kms of work and has performed faultlessly. like new


Made 317rwkw at 20 psi on E85. only ran that on the dyno. street use was 17psi however turbo can run into the 25's


Parts include the following


Hypergear ATR43ss internal gate (500hp unit)

Earls turbo lines and fittings.

Stock exhaust manifold

tube and fin Intercooler 600x300x76 3inch inlet and outlets.

All clamps and silicon couplings

2 x 3 inch dump pipes. 1 with cat is stainless + high flow cat and other without a cat is iron.

PLAZMAMAN inlet manifold also includes their billet 80 mm throttle body.

catch can setup includes all fittings and hoses

Custom made aluminum intercooler pipes (TIG welded)

3 inch intake pipe

Brand NEW k&n pod filter

turbo beanie


Any questions don't hesitate to ask

still on car, only remove when i get a deposit




$2800


Thanks for looking

post-84945-0-22619900-1437275159_thumb.jpg

post-84945-0-70318800-1437275179_thumb.jpg

post-84945-0-44245100-1437275196_thumb.jpg

post-84945-0-08548600-1437275226_thumb.jpg

post-84945-0-86390200-1437275248_thumb.jpg

post-84945-0-76629700-1437275304_thumb.jpg

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I'll snap up some photos when I'm back home, in the office today meeting my "in the office" quota. Have 2x Teams calls scheduled in, office culture they reckon.   I've never owned a proper off the shelf sub, I've always made or modified broken ones with Jaycar plate amps and/or car subwoofer drivers. The current (and broken) subwoofer has a proper home driver in it, Dayton driver, thos one https://www.daytonaudio.com/product/118/rss265hf-4-10-reference-hf-subwoofer-4-ohm FS of 25Hz, which is low but not low enough. Yeah, I think they were brought out to the market to compete with SVS. I would love a SVS PB-3000 but they're not cheap, especially after their price hike. From reviews online, it does look like the Tonewinner D6000 would destroy and with good amount of money saved too.
    • yeah, that happens too.  I'm really enjoying 4WDing at the moment, seen a few beautiful spots and want to go explore more of this enormous country.  The 370Z got a clutch LSD in it and a track day, great fun.  Getting the back end sorted out really rejuvenated my enthusiasm for driving it hard, the viscous one is poo especially in such a short and wide chassis.  The VLSD unpredictability was more benign in a long and skinny Skyline.
    • With my pre/power I use a remote trigger cable(3.5mm jack each end). I turn tv on, it turns both on via ARC. Or, just the pre with the remote or its streaming software, turns on both. Not that difficult at all. Obviously,  you would also want to actually update/upgrade over other factors in your life(bills, family, other hobbies, etc)
    • Yeah, nightfall was very "meh". And I'm crap at pvp, so feels like everyone has cheats(it's just my lack of skill). Final shape has been pretty good. New raid and dungeon are pretty good. If you want to give it a go, probably wait until it's on sale. But, as usual, most of it feels very familiar. 
    • This morning was Kingswood's Microscopic Wars. It is the album's 10 year anniversary this year and we went to see them play the whole album as a special show a couple of months back. Was pretty spectacular.
×
×
  • Create New...