Jump to content
SAU Community

Recommended Posts

Ok all this is the latest I have.....came in this morning:

Hi Danny

Looks like they're all the same price from Nissan, and all in stock, too.

Pricing as follows:
5 x mats = $263 ea
10 x mats = $251 ea
15 x mats = $239 ea

That's landed in Melb via container, pickup from our Bayswater warehouse.

And when I asked about the R34 Vspec 2's

I'll check on that one. Not sure if that's classed as the 'advanced aero package' version.



Regards,

Daniel

And we still have:

tridentt150v - GTst S2, I might get two anyway, put one away for ron??

hadouken - GTR R33

89CAL - Gtst S2 Get another one so x 2

Robzilla - GTR - R32

Ty1 - Gtst S1

kingtube69 - Gtst S2

kila32 - GTR R34

R33 gtrv-spec - GTR R33

and since thats 10, we will get the $251 price.

So what I will do is wait on the R4 Vspec 2 price then get firm numbers from you all.

Once I have a firm commitment, and we pay a deposit etc [probably to the supplier direct, hopefully that way you don't have to take a leap of faith and I don't have to go through the trust thing or handle any funds] we can order.

If it doesn't work out like that then I'll go to plan B, but lets leave it at that for now.

But wait until we get the Vspec 2 info first.

  • Like 2

Only question I have now is how much is postage going to be interstate etc?

I will have to confirm the second bonnet mat I'm in for once I get a rough Idea of what they will cost landed here.

:thumbsup:

  • Like 1

Yeah, still waiting on a reply and price for the R34 Vspec 2 ones.

Rise I'd say the same as for all of them...........thats what the supplier says, so $251 if we order 10 total - not just yours but everyones.

Latest reply from supplier:

Sit tight mate, have been flat out this week.

These are the two options:

R34 GTR - 65840-AA400 = *2K.GTR/V2 M SPEC
R34 GTR - 65840-AA410 = *2K.GTR/V2 GTR/N1 SPEC

Im not sure which is the one from your picture.
Regards,

Rob

So sit tight, tablecloths pretty much sorted, still waiting on the doullies!!!

I believe the R34 GTR - 65840-AA400 = *2K.GTR/V2 M SPEC is a full underbonnet Mat, whilst the is the R34 GTR - 65840-AA410 = *2K.GTR/V2 GTR/N1 SPEC small mat we are after

Are the suppliers finding out?

I can't see the supplier being excited about confirming which part you need as any mistake would become their liability....

To get the exact part number send your VIN to someone with FAST and they can check specifically. There is a thread somewhere for FAST parts lookup or alternatively PM me your VIN and I can check.

They are asking..........and will get back to us soon.

Obviously they don't want to make a mistake and be stuck with mats nobody wants so their cautious approach.

Latest:

Hi Danny

Nissan don't list a diagram/shape for the different V-Spec II covers, so we can't confirm which one is which unfortunately.

Can they see if there's a part number on their existing one - if they have one?


Regards,

So can the two guys who want the VSpec II mats please use Nissan Fast and their Vin number to check the part number???

There is a service on SAU here: http://www.sau.com.au/forums/topic/128496-vins-you-want-fasted/page-225

Otherwise there are members who have access.

Well I finally found a copy of Nissan Fast I was allowed to use and SCRMER kindly volunteered his VIN number. From this I reckon that the part number we need for the doullie mats is 65820.

I have emailed this info to the supplier and hopefully they will be able to it and get a proce.

Once we have this I'll move to phase 3 [if there is one...and don't ask how many phases there are, I'm learning as I go] which is ordering and organising deposits/payments.

I think the last step will be paying for postage and mailing out, but as per usual I'll keep everyone informed.

Only question I have now is how much is postage going to be interstate etc?

I will have to confirm the second bonnet mat I'm in for once I get a rough Idea of what they will cost landed here.

:thumbsup:

Any idea on this? I have to work out payment for the 2nd under bonnet mat (if it is still wanted) so i can confirm im ordering either 2 or just the 1 for me

Latest email:

Hi Mate,

As per attached, just that small bit?

Retail for about 12,000yen.

Checking stocks now.

Its for the R34 VSpec II mats. They are still saying that there are two part numbers for it even though I used SCMER's VIN number and sent them the lower part of the screenshot of Nissan Fast to them with the part number. I get part number 65820, they are saying 65840??? and then two sub part numbers. We will get to the bottom of this, I will keep chasing them about it.

I'll wait to next Monday [cos I'm away till then anyway] but I don't think we should delay the purchase process any further. I'll contact the supplier and see what we need to do for the next step = paying up/deposit.

post-5748-0-12180700-1441167317_thumb.jpg

No idea, and until we get them I really couldn't say sorry. Take your old one in to the post office and see maybe?

All good. If you had a rough idea then great, if not it shouldnt cost the world (i hope)

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've been pondering this, I really enjoy the convertible thing, for me, it's like riding a motorbike, without all the issue of riding a motorbike, mainly, my old sore arthritic joints getting beaten up, and, being able to do it in shorts and a T-shirt and not needing a helmet and all the other gear required, especially like wearing jackets and pants in the summer, or needing 6 layers of cloths in the winter, or not having wet weather gear handy when your 100km away from home on the bike when it decides to start raining As for the hard top and its Coupe look, whilst I do lose all that open top feeling that I really enjoy, from my experience with the NB with a detachable hard top, the cabin is a much nicer place to be, the difference in noise for one, a hard top quietens down the interior, alot, with the soft top up or down it's pretty noisy, which, after 5 or so hours, can get tiring But, as you stated, the detachable hard top totally changes the look of the car, in a really good way, and for me, the look of a detachable hard top is so much better than the PRHT which looks more like a after thought with its weird bulbous rear roof line For me, the minimal effort of putting in on, or storing it after removing it, is well worth the time and effort for the look alone And yes, I'm sure the next owner will be grateful for it as well.......  
    • I get into huffs with people when I suggest the MX5 looks so much better as a coupe than it does as convertible. Pretty sure I don't prefer the convertible version of anything. Good job on the hardtop! The next buyer will appreciate.
    • IMO wrap does have its uses, but like you said, quality wrap, and professional installation, would probably cost want a quality paint job does, but, the paint, if maintained, is basically for life, and much easier to touch up if required  In other news: it's pissing down here, with thunder, lightning and only some small hail "at this stage", luckily all "my" cars are undercover  I've also been contacted by a guy in Newcastle about the SS, he said he will come down next weekend for a look, we'll see how that transpires I guess 🫰
    • Nah, I'm not an a-hole, ha ha!   I do like the colour match. Some of the carbon fibre wraps are quite freaking horrible. There's one a local company I know uses, and it looks damn good! Also very very expensive per metre to buy! ha ha ha It might be cheaper to respray the roof than use the good CF Wrap, ha ha!
    • Please noooooooo 😭 As for wrap, no thank you mate, I've seen and used "carbon fibre" wrap before, and for these hard tops, they look soooo good when colour matched Like this >>>
×
×
  • Create New...