Jump to content
SAU Community

Recommended Posts

All parts will be available from 1st August 2015 an can be seen running an working. 1- selling as on lot power fc r33 modle, z32 afm, 850cc denso drop in injectors, 44mm turbonetics wastgate, holset hx35 turbo, pfc hand controller, ebay top mount manifold no cracks and a plumback 3 inch dump pipe to suit a vl but i think r33 run the same shape pipe. The computer is tuned for this setup on a standard rb25 engine no internal mods just a intercooler an a 3inch exhaust on e85 made 305kw on 16 pound an 280kw on 12 pound can provide dyno sheet for proof all u need to do is update ur fuel pump asking $2500 2- custom forward facing plenum started to polish it but gave up will also come with full polished standard botton half of manifold $400 3- r34 rb25 neodet head perfect working order has about 130xxx ks has never over heate or had any issues $450 4- rb25neo det bottem end has blown ringlands has abit of blowby suit rebuild $250 5- extrem ceremic brass button clutch with flywheel rated at 350kw is 8 months old an only seen about 2000ks paid 650 askin $350 6- apexi avcr boost controller full kit ive never got around to install it $200 7- splitfire coils ds001 to suit rb20 rb25s1 an rb26 only 4000ks use perfect condition i bought them new still hav there box an will also come with the coil loom which was bought new at the time i bought the injectors $450 other parts, pink sticker afm 50, r33 s1 tps 1year old $30, r33 oxygen sensor 1 year old $30, vl aluminum rb radiator $100, vl 3inch exhaust $100, r33 rb25 s1 loom modified for vl plugs into factory vl body loom an i think it needed to extra wires added for tacho an permanent power an alternator an started loom for rb25 modified for vl $200, vl mx7 gearbox suit rebuild doesn't grind but needs sycnros an has a wind $50, vl mx7 tailshaft $200 all parts located Guildford nsw but can post some parts

post-119725-0-98369800-1437910642_thumb.jpg

post-119725-0-86203500-1437910713_thumb.jpg

post-119725-0-26107300-1437910788_thumb.jpg

post-119725-0-11569000-1437910825_thumb.jpg

post-119725-0-57313900-1437910888_thumb.jpg

post-119725-0-25325900-1437910973_thumb.jpg

post-119725-0-98025700-1437911145_thumb.jpg

Hi mate, I will take the apexi avcr off you ok. Please either pm me or txt/call me on 0449939559. Thanks bro, talk soon. Mick

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • He is around but doesn’t really do automotive stuff anymore, mainly does commercial work now 
    • Shortly after I do the usual full exhaust/ fmic/fuel pump/ R33 turbo and still get flogged at the lights by i30Ns
    • Is Chris from Craved Coatings still around? He is an ex SAU guy and did great powder coating (back in the day at least)
    • Bumping this thread yet again, has anyone ever tried putting yet another vacuum regulating valve on the hose that goes between the turbo inlet? Something local owners have mentioned is the Radium breather pipes de-restrict the valve cover but it actually produces an undesirable outcome in practice, way too much air is sucked out of the crankcase and a ton of oil comes with it as well. As far as I can tell the PCV diaphragm in these modern euro wet sump performance engines is active during boost as well, there's just a check valve to block boost from entering the valve cover and crankcase as there's no inherent check valve function in these diaphragm-type valves. Hopefully I'll be able to try some of this out soon. The Volvo XC90 4.4 V8 has a nice external version of these things.
    • So when will the Samsonas, twin scroll turbo setup on go?  
×
×
  • Create New...